forked from ~ljy/RK356X_SDK_RELEASE
blame | history | patch | commit | commitdiff
hc
2024-10-22 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 
 kernel/Documentation/devicetree/bindings/leds/common.txt
....@@ -1,115 +1 @@
1
-* Common leds properties.
2
-
3
-LED and flash LED devices provide the same basic functionality as current
4
-regulators, but extended with LED and flash LED specific features like
5
-blinking patterns, flash timeout, flash faults and external flash strobe mode.
6
-
7
-Many LED devices expose more than one current output that can be connected
8
-to one or more discrete LED component. Since the arrangement of connections
9
-can influence the way of the LED device initialization, the LED components
10
-have to be tightly coupled with the LED device binding. They are represented
11
-by child nodes of the parent LED device binding.
12
-
13
-Optional properties for child nodes:
14
-- led-sources : List of device current outputs the LED is connected to. The
15
-		outputs are identified by the numbers that must be defined
16
-		in the LED device binding documentation.
17
-- label : The label for this LED. If omitted, the label is taken from the node
18
-	  name (excluding the unit address). It has to uniquely identify
19
-	  a device, i.e. no other LED class device can be assigned the same
20
-	  label.
21
-
22
-- default-state : The initial state of the LED. Valid values are "on", "off",
23
-  and "keep". If the LED is already on or off and the default-state property is
24
-  set the to same value, then no glitch should be produced where the LED
25
-  momentarily turns off (or on). The "keep" setting will keep the LED at
26
-  whatever its current state is, without producing a glitch.  The default is
27
-  off if this property is not present.
28
-
29
-- linux,default-trigger :  This parameter, if present, is a
30
-    string defining the trigger assigned to the LED.  Current triggers are:
31
-     "backlight" - LED will act as a back-light, controlled by the framebuffer
32
-		   system
33
-     "default-on" - LED will turn on (but for leds-gpio see "default-state"
34
-		    property in Documentation/devicetree/bindings/leds/leds-gpio.txt)
35
-     "heartbeat" - LED "double" flashes at a load average based rate
36
-     "disk-activity" - LED indicates disk activity
37
-     "ide-disk" - LED indicates IDE disk activity (deprecated),
38
-                  in new implementations use "disk-activity"
39
-     "timer" - LED flashes at a fixed, configurable rate
40
-
41
-- led-max-microamp : Maximum LED supply current in microamperes. This property
42
-                     can be made mandatory for the board configurations
43
-                     introducing a risk of hardware damage in case an excessive
44
-                     current is set.
45
-                     For flash LED controllers with configurable current this
46
-                     property is mandatory for the LEDs in the non-flash modes
47
-                     (e.g. torch or indicator).
48
-
49
-- panic-indicator : This property specifies that the LED should be used,
50
-		    if at all possible, as a panic indicator.
51
-
52
-- trigger-sources : List of devices which should be used as a source triggering
53
-		    this LED activity. Some LEDs can be related to a specific
54
-		    device and should somehow indicate its state. E.g. USB 2.0
55
-		    LED may react to device(s) in a USB 2.0 port(s).
56
-		    Another common example is switch or router with multiple
57
-		    Ethernet ports each of them having its own LED assigned
58
-		    (assuming they are not hardwired). In such cases this
59
-		    property should contain phandle(s) of related source
60
-		    device(s).
61
-		    In many cases LED can be related to more than one device
62
-		    (e.g. one USB LED vs. multiple USB ports). Each source
63
-		    should be represented by a node in the device tree and be
64
-		    referenced by a phandle and a set of phandle arguments. A
65
-		    length of arguments should be specified by the
66
-		    #trigger-source-cells property in the source node.
67
-
68
-Required properties for flash LED child nodes:
69
-- flash-max-microamp : Maximum flash LED supply current in microamperes.
70
-- flash-max-timeout-us : Maximum timeout in microseconds after which the flash
71
-                         LED is turned off.
72
-
73
-For controllers that have no configurable current the flash-max-microamp
74
-property can be omitted.
75
-For controllers that have no configurable timeout the flash-max-timeout-us
76
-property can be omitted.
77
-
78
-* Trigger source providers
79
-
80
-Each trigger source should be represented by a device tree node. It may be e.g.
81
-a USB port or an Ethernet device.
82
-
83
-Required properties for trigger source:
84
-- #trigger-source-cells : Number of cells in a source trigger. Typically 0 for
85
-			  nodes of simple trigger sources (e.g. a specific USB
86
-			  port).
87
-
88
-* Examples
89
-
90
-gpio-leds {
91
-	compatible = "gpio-leds";
92
-
93
-	system-status {
94
-		label = "Status";
95
-		linux,default-trigger = "heartbeat";
96
-		gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
97
-	};
98
-
99
-	usb {
100
-		gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
101
-		trigger-sources = <&ohci_port1>, <&ehci_port1>;
102
-	};
103
-};
104
-
105
-max77693-led {
106
-	compatible = "maxim,max77693-led";
107
-
108
-	camera-flash {
109
-		label = "Flash";
110
-		led-sources = <0>, <1>;
111
-		led-max-microamp = <50000>;
112
-		flash-max-microamp = <320000>;
113
-		flash-max-timeout-us = <500000>;
114
-	};
115
-};
1
+This file has moved to ./common.yaml.