~hc/RK356X_SDK_RELEASE.git

..	..	@@ -6,15 +6,20 @@
6	6	Required properties:
7	7	- compatible: Should be "brcm,7268-v3d" or "brcm,7278-v3d"
8	8	- reg: Physical base addresses and lengths of the register areas
9		-- reg-names: Names for the register areas. The "hub", "bridge", and "core0"
	9	+- reg-names: Names for the register areas. The "hub" and "core0"
10	10	register areas are always required. The "gca" register area
11		- is required if the GCA cache controller is present.
	11	+ is required if the GCA cache controller is present. The
	12	+ "bridge" register area is required if an external reset
	13	+ controller is not present.
12	14	- interrupts: The interrupt numbers. The first interrupt is for the hub,
13		- while the following interrupts are for the cores.
	15	+ while the following interrupts are separate interrupt lines
	16	+ for the cores (if they don't share the hub's interrupt).
14	17	See bindings/interrupt-controller/interrupts.txt
15	18
16	19	Optional properties:
17	20	- clocks: The core clock the unit runs on
	21	+- resets: The reset line for v3d, if not using a mapping of the bridge
	22	+ See bindings/reset/reset.txt
18	23
19	24	v3d {
20	25	compatible = "brcm,7268-v3d";