修改4g拨号为QMI,需要在系统里后台执行quectel-CM

hc

2024-10-22 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5

 kernel/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
..
..
@@ -3,12 +3,24 @@
3
3
 
4
4
 Required properties:
5
5
 - compatible		: Should be "nxp,lpc1850-gpio"
6
-- reg			: Address and length of the register set for the device
7
-- clocks		: Clock specifier (see clock bindings for details)
8
-- gpio-controller	: Marks the device node as a GPIO controller.
9
-- #gpio-cells 		: Should be two
10
-			  - First cell is the GPIO line number
11
-			  - Second cell is used to specify polarity
6
+- reg			: List of addresses and lengths of the GPIO controller
7
+			  register sets
8
+- reg-names		: Should be "gpio", "gpio-pin-ic", "gpio-group0-ic" and
9
+			  "gpio-gpoup1-ic"
10
+- clocks		: Phandle and clock specifier pair for GPIO controller
11
+- resets		: Phandle and reset specifier pair for GPIO controller
12
+- gpio-controller	: Marks the device node as a GPIO controller
13
+- #gpio-cells 		: Should be two:
14
+			  - The first cell is the GPIO line number
15
+			  - The second cell is used to specify polarity
16
+- interrupt-controller	: Marks the device node as an interrupt controller
17
+- #interrupt-cells	: Should be two:
18
+			  - The first cell is an interrupt number within
19
+			    0..9 range, for GPIO pin interrupts it is equal
20
+			    to 'nxp,gpio-pin-interrupt' property value of
21
+			    GPIO pin configuration, 8 is for GPIO GROUP0
22
+			    interrupt, 9 is for GPIO GROUP1 interrupt
23
+			  - The second cell is used to specify interrupt type
12
24
 
13
25
 Optional properties:
14
26
 - gpio-ranges		: Mapping between GPIO and pinctrl
..
..
@@ -19,21 +31,29 @@
19
31
 
20
32
 gpio: gpio@400f4000 {
21
33
 	compatible = "nxp,lpc1850-gpio";
22
-	reg = <0x400f4000 0x4000>;
34
+	reg = <0x400f4000 0x4000>, <0x40087000 0x1000>,
35
+	      <0x40088000 0x1000>, <0x40089000 0x1000>;
36
+	reg-names = "gpio", "gpio-pin-ic",
37
+		    "gpio-group0-ic", "gpio-gpoup1-ic";
23
38
 	clocks = <&ccu1 CLK_CPU_GPIO>;
39
+	resets = <&rgu 28>;
24
40
 	gpio-controller;
25
41
 	#gpio-cells = <2>;
42
+	interrupt-controller;
43
+	#interrupt-cells = <2>;
26
44
 	gpio-ranges =	<&pinctrl LPC_GPIO(0,0)  LPC_PIN(0,0)  2>,
27
45
 			...
28
46
 			<&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5)  7>;
29
47
 };
30
48
 
31
49
 gpio_joystick {
32
-	compatible = "gpio-keys-polled";
50
+	compatible = "gpio-keys";
33
51
 	...
34
52
 
35
-	button@0 {
53
+	button0 {
36
54
 		...
55
+		interrupt-parent = <&gpio>;
56
+		interrupts = <1 IRQ_TYPE_EDGE_BOTH>;
37
57
 		gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
38
58
 	};
39
59
 };