~hc/RK356X_SDK_RELEASE.git

..	..	@@ -5,6 +5,8 @@
5	5	- "ti,omap2-gpio" for OMAP2 controllers
6	6	- "ti,omap3-gpio" for OMAP3 controllers
7	7	- "ti,omap4-gpio" for OMAP4 controllers
	8	+- reg : Physical base address of the controller and length of memory mapped
	9	+ region.
8	10	- gpio-controller : Marks the device node as a GPIO controller.
9	11	- #gpio-cells : Should be two.
10	12	- first cell is the pin number
..	..	@@ -18,6 +20,8 @@
18	20	2 = high-to-low edge triggered.
19	21	4 = active high level-sensitive.
20	22	8 = active low level-sensitive.
	23	+- interrupts : The interrupt the controller is rising as output when an
	24	+ interrupt occures
21	25
22	26	OMAP specific properties:
23	27	- ti,hwmods: Name of the hwmod associated to the GPIO:
..	..	@@ -29,11 +33,13 @@
29	33
30	34	Example:
31	35
32		-gpio4: gpio4 {
	36	+gpio0: gpio@44e07000 {
33	37	compatible = "ti,omap4-gpio";
34		- ti,hwmods = "gpio4";
	38	+ reg = <0x44e07000 0x1000>;
	39	+ ti,hwmods = "gpio1";
35	40	gpio-controller;
36	41	#gpio-cells = <2>;
37	42	interrupt-controller;
38	43	#interrupt-cells = <2>;
	44	+ interrupts = <96>;
39	45	};