修改4g拨号为QMI,需要在系统里后台执行quectel-CM

hc

2024-10-22 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5

 kernel/Documentation/devicetree/bindings/gpio/gpio-altera.txt
..
..
@@ -9,8 +9,9 @@
9
9
   - The second cell is reserved and is currently unused.
10
10
 - gpio-controller : Marks the device node as a GPIO controller.
11
11
 - interrupt-controller: Mark the device node as an interrupt controller
12
-- #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware.
12
+- #interrupt-cells : Should be 2. The interrupt type is fixed in the hardware.
13
13
   - The first cell is the GPIO offset number within the GPIO controller.
14
+  - The second cell is the interrupt trigger type and level flags.
14
15
 - interrupts: Specify the interrupt.
15
16
 - altr,interrupt-type: Specifies the interrupt trigger type the GPIO
16
17
   hardware is synthesized. This field is required if the Altera GPIO controller
..
..
@@ -38,6 +39,6 @@
38
39
 	altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
39
40
 	#gpio-cells = <2>;
40
41
 	gpio-controller;
41
-	#interrupt-cells = <1>;
42
+	#interrupt-cells = <2>;
42
43
 	interrupt-controller;
43
44
 };