forked from ~ljy/RK356X_SDK_RELEASE
blame | history | patch | commit | commitdiff
hc
2024-10-22 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 
 kernel/Documentation/devicetree/bindings/clock/at91-clock.txt
....@@ -4,533 +4,55 @@
44 
55 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
66 
7
+Slow Clock controller:
8
+
79 Required properties:
810 - compatible : shall be one of the following:
9
-	"atmel,at91sam9x5-sckc" or
10
-	"atmel,sama5d4-sckc":
11
+	"atmel,at91sam9x5-sckc",
12
+	"atmel,sama5d3-sckc",
13
+	"atmel,sama5d4-sckc" or
14
+	"microchip,sam9x60-sckc":
1115 		at91 SCKC (Slow Clock Controller)
12
-		This node contains the slow clock definitions.
13
-
14
-	"atmel,at91sam9x5-clk-slow-osc":
15
-		at91 slow oscillator
16
-
17
-	"atmel,at91sam9x5-clk-slow-rc-osc":
18
-		at91 internal slow RC oscillator
19
-
20
-	"atmel,<chip>-pmc":
21
-		at91 PMC (Power Management Controller)
22
-		All at91 specific clocks (clocks defined below) must be child
23
-		node of the PMC node.
24
-		<chip> can be: at91rm9200, at91sam9260, at91sam9261,
25
-		at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9x5,
26
-		sama5d2, sama5d3 or sama5d4.
27
-
28
-	"atmel,at91sam9x5-clk-slow" (under sckc node)
29
-	or
30
-	"atmel,at91sam9260-clk-slow" (under pmc node):
31
-		at91 slow clk
32
-
33
-	"atmel,at91rm9200-clk-main-osc"
34
-	"atmel,at91sam9x5-clk-main-rc-osc"
35
-		at91 main clk sources
36
-
37
-	"atmel,at91sam9x5-clk-main"
38
-	"atmel,at91rm9200-clk-main":
39
-		at91 main clock
40
-
41
-	"atmel,at91rm9200-clk-master" or
42
-	"atmel,at91sam9x5-clk-master":
43
-		at91 master clock
44
-
45
-	"atmel,at91sam9x5-clk-peripheral" or
46
-	"atmel,at91rm9200-clk-peripheral":
47
-		at91 peripheral clocks
48
-
49
-	"atmel,at91rm9200-clk-pll" or
50
-	"atmel,at91sam9g45-clk-pll" or
51
-	"atmel,at91sam9g20-clk-pllb" or
52
-	"atmel,sama5d3-clk-pll":
53
-		at91 pll clocks
54
-
55
-	"atmel,at91sam9x5-clk-plldiv":
56
-		at91 plla divisor
57
-
58
-	"atmel,at91rm9200-clk-programmable" or
59
-	"atmel,at91sam9g45-clk-programmable" or
60
-	"atmel,at91sam9x5-clk-programmable":
61
-		at91 programmable clocks
62
-
63
-	"atmel,at91sam9x5-clk-smd":
64
-		at91 SMD (Soft Modem) clock
65
-
66
-	"atmel,at91rm9200-clk-system":
67
-		at91 system clocks
68
-
69
-	"atmel,at91rm9200-clk-usb" or
70
-	"atmel,at91sam9x5-clk-usb" or
71
-	"atmel,at91sam9n12-clk-usb":
72
-		at91 usb clock
73
-
74
-	"atmel,at91sam9x5-clk-utmi":
75
-		at91 utmi clock
76
-
77
-	"atmel,sama5d4-clk-h32mx":
78
-		at91 h32mx clock
79
-
80
-	"atmel,sama5d2-clk-generated":
81
-		at91 generated clock
82
-
83
-	"atmel,sama5d2-clk-audio-pll-frac":
84
-		at91 audio fractional pll
85
-
86
-	"atmel,sama5d2-clk-audio-pll-pad":
87
-		at91 audio pll CLK_AUDIO output pin
88
-
89
-	"atmel,sama5d2-clk-audio-pll-pmc"
90
-		at91 audio pll output on AUDIOPLLCLK that feeds the PMC
91
-		and can be used by peripheral clock or generic clock
92
-
93
-	"atmel,sama5d2-clk-i2s-mux" (under pmc node):
94
-		at91 I2S clock source selection
95
-
96
-Required properties for SCKC node:
97
-- reg : defines the IO memory reserved for the SCKC.
98
-- #size-cells : shall be 0 (reg is used to encode clk id).
99
-- #address-cells : shall be 1 (reg is used to encode clk id).
100
-
101
-
102
-For example:
103
-	sckc: sckc@fffffe50 {
104
-		compatible = "atmel,sama5d3-pmc";
105
-		reg = <0xfffffe50 0x4>
106
-		#size-cells = <0>;
107
-		#address-cells = <1>;
108
-
109
-		/* put at91 slow clocks here */
110
-	};
111
-
112
-
113
-Required properties for internal slow RC oscillator:
114
-- #clock-cells : from common clock binding; shall be set to 0.
115
-- clock-frequency : define the internal RC oscillator frequency.
116
-
117
-Optional properties:
118
-- clock-accuracy : define the internal RC oscillator accuracy.
119
-
120
-For example:
121
-	slow_rc_osc: slow_rc_osc {
122
-		compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
123
-		clock-frequency = <32768>;
124
-		clock-accuracy = <50000000>;
125
-	};
126
-
127
-Required properties for slow oscillator:
128
-- #clock-cells : from common clock binding; shall be set to 0.
129
-- clocks : shall encode the main osc source clk sources (see atmel datasheet).
16
+- #clock-cells : shall be 1 for "microchip,sam9x60-sckc" otherwise shall be 0.
17
+- clocks : shall be the input parent clock phandle for the clock.
13018 
13119 Optional properties:
13220 - atmel,osc-bypass : boolean property. Set this when a clock signal is directly
13321   provided on XIN.
13422 
13523 For example:
136
-	slow_osc: slow_osc {
137
-		compatible = "atmel,at91rm9200-clk-slow-osc";
138
-		#clock-cells = <0>;
24
+	sckc@fffffe50 {
25
+		compatible = "atmel,at91sam9x5-sckc";
26
+		reg = <0xfffffe50 0x4>;
13927 		clocks = <&slow_xtal>;
140
-	};
141
-
142
-Required properties for slow clock:
143
-- #clock-cells : from common clock binding; shall be set to 0.
144
-- clocks : shall encode the slow clk sources (see atmel datasheet).
145
-
146
-For example:
147
-	clk32k: slck {
148
-		compatible = "atmel,at91sam9x5-clk-slow";
14928 		#clock-cells = <0>;
150
-		clocks = <&slow_rc_osc &slow_osc>;
15129 	};
15230 
153
-Required properties for PMC node:
154
-- reg : defines the IO memory reserved for the PMC.
155
-- #size-cells : shall be 0 (reg is used to encode clk id).
156
-- #address-cells : shall be 1 (reg is used to encode clk id).
157
-- interrupts : shall be set to PMC interrupt line.
158
-- interrupt-controller : tell that the PMC is an interrupt controller.
159
-- #interrupt-cells : must be set to 1. The first cell encodes the interrupt id,
160
-	and reflect the bit position in the PMC_ER/DR/SR registers.
161
-	You can use the dt macros defined in dt-bindings/clock/at91.h.
162
-	0 (AT91_PMC_MOSCS) -> main oscillator ready
163
-	1 (AT91_PMC_LOCKA) -> PLL A ready
164
-	2 (AT91_PMC_LOCKB) -> PLL B ready
165
-	3 (AT91_PMC_MCKRDY) -> master clock ready
166
-	6 (AT91_PMC_LOCKU) -> UTMI PLL clock ready
167
-	8 .. 15 (AT91_PMC_PCKRDY(id)) -> programmable clock ready
168
-	16 (AT91_PMC_MOSCSELS) -> main oscillator selected
169
-	17 (AT91_PMC_MOSCRCS) -> RC main oscillator stabilized
170
-	18 (AT91_PMC_CFDEV) -> clock failure detected
31
+Power Management Controller (PMC):
17132 
172
-For example:
173
-	pmc: pmc@fffffc00 {
174
-		compatible = "atmel,sama5d3-pmc";
175
-		interrupts = <1 4 7>;
176
-		interrupt-controller;
177
-		#interrupt-cells = <2>;
178
-		#size-cells = <0>;
179
-		#address-cells = <1>;
180
-
181
-		/* put at91 clocks here */
182
-	};
183
-
184
-Required properties for main clock internal RC oscillator:
185
-- interrupts : shall be set to "<0>".
186
-- clock-frequency : define the internal RC oscillator frequency.
33
+Required properties:
34
+- compatible : shall be "atmel,<chip>-pmc", "syscon" or
35
+	"microchip,sam9x60-pmc"
36
+	<chip> can be: at91rm9200, at91sam9260, at91sam9261,
37
+	at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15,
38
+	at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5,
39
+	sama5d2, sama5d3 or sama5d4.
40
+- #clock-cells : from common clock binding; shall be set to 2. The first entry
41
+  is the type of the clock (core, system, peripheral or generated) and the
42
+  second entry its index as provided by the datasheet
43
+- clocks : Must contain an entry for each entry in clock-names.
44
+- clock-names: Must include the following entries: "slow_clk", "main_xtal"
18745 
18846 Optional properties:
189
-- clock-accuracy : define the internal RC oscillator accuracy.
47
+- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
48
+  provided on XIN.
19049 
19150 For example:
192
-	main_rc_osc: main_rc_osc {
193
-		compatible = "atmel,at91sam9x5-clk-main-rc-osc";
194
-		interrupt-parent = <&pmc>;
195
-		interrupts = <0>;
196
-		clock-frequency = <12000000>;
197
-		clock-accuracy = <50000000>;
198
-	};
199
-
200
-Required properties for main clock oscillator:
201
-- interrupts : shall be set to "<0>".
202
-- #clock-cells : from common clock binding; shall be set to 0.
203
-- clocks : shall encode the main osc source clk sources (see atmel datasheet).
204
-
205
-Optional properties:
206
-- atmel,osc-bypass : boolean property. Specified if a clock signal is provided
207
-  on XIN.
208
-
209
-  clock signal is directly provided on XIN pin.
210
-
211
-For example:
212
-	main_osc: main_osc {
213
-		compatible = "atmel,at91rm9200-clk-main-osc";
214
-		interrupt-parent = <&pmc>;
215
-		interrupts = <0>;
216
-		#clock-cells = <0>;
217
-		clocks = <&main_xtal>;
218
-	};
219
-
220
-Required properties for main clock:
221
-- interrupts : shall be set to "<0>".
222
-- #clock-cells : from common clock binding; shall be set to 0.
223
-- clocks : shall encode the main clk sources (see atmel datasheet).
224
-
225
-For example:
226
-	main: mainck {
227
-		compatible = "atmel,at91sam9x5-clk-main";
228
-		interrupt-parent = <&pmc>;
229
-		interrupts = <0>;
230
-		#clock-cells = <0>;
231
-		clocks = <&main_rc_osc &main_osc>;
232
-	};
233
-
234
-Required properties for master clock:
235
-- interrupts : shall be set to "<3>".
236
-- #clock-cells : from common clock binding; shall be set to 0.
237
-- clocks : shall be the master clock sources (see atmel datasheet) phandles.
238
-	e.g. "<&ck32k>, <&main>, <&plla>, <&pllb>".
239
-- atmel,clk-output-range : minimum and maximum clock frequency (two u32
240
-			   fields).
241
-	   e.g. output = <0 133000000>; <=> 0 to 133MHz.
242
-- atmel,clk-divisors : master clock divisors table (four u32 fields).
243
-		0 <=> reserved value.
244
-		e.g. divisors = <1 2 4 6>;
245
-- atmel,master-clk-have-div3-pres : some SoC use the reserved value 7 in the
246
-				    PRES field as CLOCK_DIV3 (e.g sam9x5).
247
-
248
-For example:
249
-	mck: mck {
250
-		compatible = "atmel,at91rm9200-clk-master";
251
-		interrupt-parent = <&pmc>;
252
-		interrupts = <3>;
253
-		#clock-cells = <0>;
254
-		atmel,clk-output-range = <0 133000000>;
255
-		atmel,clk-divisors = <1 2 4 0>;
256
-	};
257
-
258
-Required properties for peripheral clocks:
259
-- #size-cells : shall be 0 (reg is used to encode clk id).
260
-- #address-cells : shall be 1 (reg is used to encode clk id).
261
-- clocks : shall be the master clock phandle.
262
-	e.g. clocks = <&mck>;
263
-- name: device tree node describing a specific peripheral clock.
264
-	* #clock-cells : from common clock binding; shall be set to 0.
265
-	* reg: peripheral id. See Atmel's datasheets to get a full
266
-	  list of peripheral ids.
267
-	* atmel,clk-output-range : minimum and maximum clock frequency
268
-	  (two u32 fields). Only valid on at91sam9x5-clk-peripheral
269
-	  compatible IPs.
270
-
271
-For example:
272
-	periph: periphck {
273
-		compatible = "atmel,at91sam9x5-clk-peripheral";
274
-		#size-cells = <0>;
275
-		#address-cells = <1>;
276
-		clocks = <&mck>;
277
-
278
-		ssc0_clk {
279
-			#clock-cells = <0>;
280
-			reg = <2>;
281
-			atmel,clk-output-range = <0 133000000>;
282
-		};
283
-
284
-		usart0_clk {
285
-			#clock-cells = <0>;
286
-			reg = <3>;
287
-			atmel,clk-output-range = <0 66000000>;
288
-		};
289
-	};
290
-
291
-
292
-Required properties for pll clocks:
293
-- interrupts : shall be set to "<1>".
294
-- #clock-cells : from common clock binding; shall be set to 0.
295
-- clocks : shall be the main clock phandle.
296
-- reg : pll id.
297
-	0 -> PLL A
298
-	1 -> PLL B
299
-- atmel,clk-input-range : minimum and maximum source clock frequency (two u32
300
-			  fields).
301
-	  e.g. input = <1 32000000>; <=> 1 to 32MHz.
302
-- #atmel,pll-clk-output-range-cells : number of cells reserved for pll output
303
-				      range description. Sould be set to 2, 3
304
-				      or 4.
305
-	* 1st and 2nd cells represent the frequency range (min-max).
306
-	* 3rd cell is optional and represents the OUT field value for the given
307
-	  range.
308
-	* 4th cell is optional and represents the ICPLL field (PLLICPR
309
-	  register)
310
-- atmel,pll-clk-output-ranges : pll output frequency ranges + optional parameter
311
-				depending on #atmel,pll-output-range-cells
312
-				property value.
313
-
314
-For example:
315
-	plla: pllack {
316
-		compatible = "atmel,at91sam9g45-clk-pll";
317
-		interrupt-parent = <&pmc>;
318
-		interrupts = <1>;
319
-		#clock-cells = <0>;
320
-		clocks = <&main>;
321
-		reg = <0>;
322
-		atmel,clk-input-range = <2000000 32000000>;
323
-		#atmel,pll-clk-output-range-cells = <4>;
324
-		atmel,pll-clk-output-ranges = <74500000 800000000 0 0
325
-					       69500000 750000000 1 0
326
-					       64500000 700000000 2 0
327
-					       59500000 650000000 3 0
328
-					       54500000 600000000 0 1
329
-					       49500000 550000000 1 1
330
-					       44500000 500000000 2 1
331
-					       40000000 450000000 3 1>;
332
-	};
333
-
334
-Required properties for plldiv clocks (plldiv = pll / 2):
335
-- #clock-cells : from common clock binding; shall be set to 0.
336
-- clocks : shall be the plla clock phandle.
337
-
338
-The pll divisor is equal to 2 and cannot be changed.
339
-
340
-For example:
341
-	plladiv: plladivck {
342
-		compatible = "atmel,at91sam9x5-clk-plldiv";
343
-		#clock-cells = <0>;
344
-		clocks = <&plla>;
345
-	};
346
-
347
-Required properties for programmable clocks:
348
-- #size-cells : shall be 0 (reg is used to encode clk id).
349
-- #address-cells : shall be 1 (reg is used to encode clk id).
350
-- clocks : shall be the programmable clock source phandles.
351
-	e.g. clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
352
-- name: device tree node describing a specific prog clock.
353
-	* #clock-cells : from common clock binding; shall be set to 0.
354
-	* reg : programmable clock id (register offset from  PCKx
355
-			 register).
356
-	* interrupts : shall be set to "<(8 + id)>".
357
-
358
-For example:
359
-	prog: progck {
360
-		compatible = "atmel,at91sam9g45-clk-programmable";
361
-		#size-cells = <0>;
362
-		#address-cells = <1>;
363
-		interrupt-parent = <&pmc>;
364
-		clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
365
-
366
-		prog0 {
367
-			#clock-cells = <0>;
368
-			reg = <0>;
369
-			interrupts = <8>;
370
-		};
371
-
372
-		prog1 {
373
-			#clock-cells = <0>;
374
-			reg = <1>;
375
-			interrupts = <9>;
376
-		};
377
-	};
378
-
379
-
380
-Required properties for smd clock:
381
-- #clock-cells : from common clock binding; shall be set to 0.
382
-- clocks : shall be the smd clock source phandles.
383
-	e.g. clocks = <&plladiv>, <&utmi>;
384
-
385
-For example:
386
-	smd: smdck {
387
-		compatible = "atmel,at91sam9x5-clk-smd";
388
-		#clock-cells = <0>;
389
-		clocks = <&plladiv>, <&utmi>;
390
-	};
391
-
392
-Required properties for system clocks:
393
-- #size-cells : shall be 0 (reg is used to encode clk id).
394
-- #address-cells : shall be 1 (reg is used to encode clk id).
395
-- name: device tree node describing a specific system clock.
396
-	* #clock-cells : from common clock binding; shall be set to 0.
397
-	* reg: system clock id (bit position in SCER/SCDR/SCSR registers).
398
-	      See Atmel's datasheet to get a full list of system clock ids.
399
-
400
-For example:
401
-	system: systemck {
402
-		compatible = "atmel,at91rm9200-clk-system";
403
-		#address-cells = <1>;
404
-		#size-cells = <0>;
405
-
406
-		ddrck {
407
-			#clock-cells = <0>;
408
-			reg = <2>;
409
-			clocks = <&mck>;
410
-		};
411
-
412
-		uhpck {
413
-			#clock-cells = <0>;
414
-			reg = <6>;
415
-			clocks = <&usb>;
416
-		};
417
-
418
-		udpck {
419
-			#clock-cells = <0>;
420
-			reg = <7>;
421
-			clocks = <&usb>;
422
-		};
423
-	};
424
-
425
-
426
-Required properties for usb clock:
427
-- #clock-cells : from common clock binding; shall be set to 0.
428
-- clocks : shall be the smd clock source phandles.
429
-	e.g. clocks = <&pllb>;
430
-- atmel,clk-divisors (only available for "atmel,at91rm9200-clk-usb"):
431
-	usb clock divisor table.
432
-	e.g. divisors = <1 2 4 0>;
433
-
434
-For example:
435
-	usb: usbck {
436
-		compatible = "atmel,at91sam9x5-clk-usb";
437
-		#clock-cells = <0>;
438
-		clocks = <&plladiv>, <&utmi>;
439
-	};
440
-
441
-	usb: usbck {
442
-		compatible = "atmel,at91rm9200-clk-usb";
443
-		#clock-cells = <0>;
444
-		clocks = <&pllb>;
445
-		atmel,clk-divisors = <1 2 4 0>;
446
-	};
447
-
448
-
449
-Required properties for utmi clock:
450
-- interrupts : shall be set to "<AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>".
451
-- #clock-cells : from common clock binding; shall be set to 0.
452
-- clocks : shall be the main clock source phandle.
453
-
454
-For example:
455
-	utmi: utmick {
456
-		compatible = "atmel,at91sam9x5-clk-utmi";
457
-		interrupt-parent = <&pmc>;
458
-		interrupts = <AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>;
459
-		#clock-cells = <0>;
460
-		clocks = <&main>;
461
-	};
462
-
463
-Required properties for 32 bits bus Matrix clock (h32mx clock):
464
-- #clock-cells : from common clock binding; shall be set to 0.
465
-- clocks : shall be the master clock source phandle.
466
-
467
-For example:
468
-	h32ck: h32mxck {
469
-		#clock-cells = <0>;
470
-		compatible = "atmel,sama5d4-clk-h32mx";
471
-		clocks = <&mck>;
472
-	};
473
-
474
-Required properties for generated clocks:
475
-- #size-cells : shall be 0 (reg is used to encode clk id).
476
-- #address-cells : shall be 1 (reg is used to encode clk id).
477
-- clocks : shall be the generated clock source phandles.
478
-	e.g. clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
479
-- name: device tree node describing a specific generated clock.
480
-	* #clock-cells : from common clock binding; shall be set to 0.
481
-	* reg: peripheral id. See Atmel's datasheets to get a full
482
-	  list of peripheral ids.
483
-	* atmel,clk-output-range : minimum and maximum clock frequency
484
-	  (two u32 fields).
485
-
486
-For example:
487
-	gck {
488
-		compatible = "atmel,sama5d2-clk-generated";
489
-		#address-cells = <1>;
490
-		#size-cells = <0>;
491
-		clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
492
-
493
-		tcb0_gclk: tcb0_gclk {
494
-			#clock-cells = <0>;
495
-			reg = <35>;
496
-			atmel,clk-output-range = <0 83000000>;
497
-		};
498
-
499
-		pwm_gclk: pwm_gclk {
500
-			#clock-cells = <0>;
501
-			reg = <38>;
502
-			atmel,clk-output-range = <0 83000000>;
503
-		};
504
-	};
505
-
506
-Required properties for I2S mux clocks:
507
-- #size-cells : shall be 0 (reg is used to encode I2S bus id).
508
-- #address-cells : shall be 1 (reg is used to encode I2S bus id).
509
-- name: device tree node describing a specific mux clock.
510
-	* #clock-cells : from common clock binding; shall be set to 0.
511
-	* clocks : shall be the mux clock parent phandles; shall be 2 phandles:
512
-	  peripheral and generated clock; the first phandle shall belong to the
513
-	  peripheral clock and the second one shall belong to the generated
514
-	  clock; "clock-indices" property can be user to specify
515
-	  the correct order.
516
-	* reg: I2S bus id of the corresponding mux clock.
517
-	  e.g. reg = <0>; for i2s0, reg = <1>; for i2s1
518
-
519
-For example:
520
-	i2s_clkmux {
521
-		compatible = "atmel,sama5d2-clk-i2s-mux";
522
-		#address-cells = <1>;
523
-		#size-cells = <0>;
524
-
525
-		i2s0muxck: i2s0_muxclk {
526
-			clocks = <&i2s0_clk>, <&i2s0_gclk>;
527
-			#clock-cells = <0>;
528
-			reg = <0>;
529
-		};
530
-
531
-		i2s1muxck: i2s1_muxclk {
532
-			clocks = <&i2s1_clk>, <&i2s1_gclk>;
533
-			#clock-cells = <0>;
534
-			reg = <1>;
535
-		};
51
+	pmc: pmc@f0018000 {
52
+		compatible = "atmel,sama5d4-pmc", "syscon";
53
+		reg = <0xf0018000 0x120>;
54
+		interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
55
+		#clock-cells = <2>;
56
+		clocks = <&clk32k>, <&main_xtal>;
57
+		clock-names = "slow_clk", "main_xtal";
53658 	};