修改4g拨号为QMI,需要在系统里后台执行quectel-CM

hc

2024-10-22 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5

 kernel/Documentation/ABI/testing/sysfs-bus-rapidio
..
..
@@ -4,24 +4,27 @@
4
4
 		an individual subdirectory with the following name format of
5
5
 		device_name "nn:d:iiii", where:
6
6
 
7
-		nn   - two-digit hexadecimal ID of RapidIO network where the
7
+		====   ========================================================
8
+		nn     two-digit hexadecimal ID of RapidIO network where the
8
9
 		       device resides
9
-		d    - device type: 'e' - for endpoint or 's' - for switch
10
-		iiii - four-digit device destID for endpoints, or switchID for
10
+		d      device type: 'e' - for endpoint or 's' - for switch
11
+		iiii   four-digit device destID for endpoints, or switchID for
11
12
 		       switches
13
+		====   ========================================================
12
14
 
13
15
 		For example, below is a list of device directories that
14
16
 		represents a typical RapidIO network with one switch, one host,
15
17
 		and two agent endpoints, as it is seen by the enumerating host
16
-		(with destID = 1):
18
+		(with destID = 1)::
17
19
 
18
-		/sys/bus/rapidio/devices/00:e:0000
19
-		/sys/bus/rapidio/devices/00:e:0002
20
-		/sys/bus/rapidio/devices/00:s:0001
20
+		  /sys/bus/rapidio/devices/00:e:0000
21
+		  /sys/bus/rapidio/devices/00:e:0002
22
+		  /sys/bus/rapidio/devices/00:s:0001
21
23
 
22
-		NOTE: An enumerating or discovering endpoint does not create a
23
-		sysfs entry for itself, this is why an endpoint with destID=1 is
24
-		not shown in the list.
24
+		NOTE:
25
+		  An enumerating or discovering endpoint does not create a
26
+		  sysfs entry for itself, this is why an endpoint with destID=1
27
+		  is not shown in the list.
25
28
 
26
29
 Attributes Common for All RapidIO Devices
27
30
 -----------------------------------------