add r8169 read mac form eeprom

hc

2023-11-20 69d6da3c1c63675524a25e7dc92a4f43c4164cef

 kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
..
..
@@ -16,14 +16,6 @@
16
16
 	model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
17
17
 	compatible = "rockchip,rk3568-evb1-ddr4-v10", "rockchip,rk3568";
18
18
 
19
-	rk_headset: rk-headset {
20
-		compatible = "rockchip_headset";
21
-		headset_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
22
-		spk_ctl_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;//AMP_SD_GPIO4_C2_3V3
23
-		pinctrl-names = "default";
24
-		pinctrl-0 = <&hp_det>;
25
-	};
26
-
27
19
 	vcc2v5_sys: vcc2v5-ddr {
28
20
 		compatible = "regulator-fixed";
29
21
 		regulator-name = "vcc2v5-sys";
..
..
@@ -34,6 +26,15 @@
34
26
 		vin-supply = <&vcc3v3_sys>;
35
27
 	};
36
28
 
29
+	vcc3v3_vga: vcc3v3-vga {
30
+		compatible = "regulator-fixed";
31
+		regulator-name = "vcc3v3_vga";
32
+		regulator-always-on;
33
+		regulator-boot-on;
34
+		gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
35
+		enable-active-high;
36
+		vin-supply = <&vcc3v3_sys>;
37
+	};
37
38
 
38
39
 	pcie30_avdd0v9: pcie30-avdd0v9 {
39
40
 		compatible = "regulator-fixed";
..
..
@@ -60,9 +61,7 @@
60
61
 		regulator-name = "vcc3v3_pcie";
61
62
 		regulator-min-microvolt = <3300000>;
62
63
 		regulator-max-microvolt = <3300000>;
63
-		regulator-always-on;
64
64
 		enable-active-high;
65
-		regulator-boot-on;
66
65
 		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
67
66
 		startup-delay-us = <5000>;
68
67
 		vin-supply = <&dc_12v>;
..
..
@@ -87,12 +86,16 @@
87
86
 		enable-active-high;
88
87
 		regulator-always-on;
89
88
 		regulator-boot-on;
90
-    	};
89
+	};
91
90
 #endif
91
+
92
92
 	ndj_io_init {
93
93
          	compatible = "nk_io_control";	
94
94
 			pinctrl-names = "default";
95
95
         	pinctrl-0 = <&nk_io_gpio>;
96
+			
97
+			//gpio_op0 = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
98
+			
96
99
 			vcc_5v {
97
100
 				gpio_num = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
98
101
 				gpio_function = <0>;	
..
..
@@ -142,28 +145,50 @@
142
145
 				gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
143
146
 				gpio_function = <0>;
144
147
 			};
145
-		};
146
-#if 0			
147
-	    nk_io_init {
148
-                compatible = "nk_io_control";
149
-//				vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
150
-                hub_host2_5V_rest_gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
151
-                hub_host3_5v_gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
152
-                vcc_5v_io = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;   //VCC5_IO_EN_GPIO1_A4_3V3
153
-                vcc_12v_io = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
154
-                en_4g_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
155
-                reset_4g_gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; //4G_RST_GPIO01_B2_3V3
156
-                air_mode_4g_gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; //4G_AIR_MODE_GPIO01_B0_3V3
157
-                wake_4g_gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; //4G_WAKEUP_GPIO01_B1_3V3
158
-				hp_en_gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
159
-//              spk_out_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;//AMP_SD_GPIO4_C2_3V3			
160
-				wifi_power_en_gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
161
-//				pcie_power_en_gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;//PCIE_PWREN_H_GPIO0_D4				
162
-				pinctrl-names = "default";
163
-				pinctrl-0 = <&nk_io_gpio>;				
164
-        };
165
-#endif	
166
-		panel: panel {
148
+	#if 0		
149
+			do1 {
150
+				gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>; 
151
+				gpio_function = <0>;
152
+			};
153
+			
154
+			do2 {
155
+				gpio_num = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
156
+				gpio_function = <0>;
157
+			};
158
+			
159
+			do3 {
160
+				gpio_num = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
161
+				gpio_function = <0>;
162
+			};
163
+			
164
+			do4 {
165
+				gpio_num = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
166
+				gpio_function = <0>;
167
+			};
168
+			
169
+			do5 {
170
+				gpio_num = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>; 
171
+				gpio_function = <0>;
172
+			};
173
+			
174
+			do6 {
175
+				gpio_num = <&gpio2 RK_PD7 GPIO_ACTIVE_LOW>; 
176
+				gpio_function = <0>;
177
+			};
178
+			
179
+			do7 {
180
+				gpio_num = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>; 
181
+				gpio_function = <0>;
182
+			};
183
+			
184
+			di1 {
185
+				gpio_num = <&gpio2 RK_PD5 GPIO_ACTIVE_HIGH>;
186
+				gpio_function = <1>;
187
+			};
188
+	#endif
189
+	};
190
+	
191
+			panel: panel {
167
192
 				compatible = "simple-panel";
168
193
 				backlight = <&backlight>;
169
194
 				power-supply = <&vcc3v3_lcd0_n>;
..
..
@@ -267,10 +292,6 @@
267
292
  * video_phy0 needs to be enabled
268
293
  * when dsi0 is enabled
269
294
  */
270
-&video_phy0 {
271
-	status = "disabled";
272
-};
273
-
274
295
 &dsi0 {
275
296
 	status = "disabled";
276
297
 };
..
..
@@ -291,10 +312,6 @@
291
312
  * video_phy1 needs to be enabled
292
313
  * when dsi1 is enabled
293
314
  */
294
- 
295
-&video_phy1 {
296
-	status = "okay";
297
-}; 
298
315
 &dsi1 {
299
316
 	status = "disabled";
300
317
 };
..
..
@@ -304,29 +321,15 @@
304
321
 };
305
322
 
306
323
 &dsi1_in_vp1 {
307
-	status = "okay";
324
+	status = "disabled";
308
325
 };
309
326
 
310
327
 &dsi1_panel {
311
-	power-supply = <&vcc3v3_lcd1_n>;   //MIPI_3V3EN_GPIO3_A3_d_3V3
312
-    vddio-mipi = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; //MIPI_EN_1V8_GPIO3_A4_d_3V3
313
-    reset-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>; //MIPI_RST_L_GPIO3_C7
314
-    vcc-5v-gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
315
-    pinctrl-names = "default";
316
-    pinctrl-0 = <&lcd1_rst_gpio>;
328
+	power-supply = <&vcc3v3_lcd1_n>;
317
329
 };
318
-
319
-&route_dsi1 {
320
-	status = "disabled";
321
-	connect = <&vp1_out_dsi1>;
322
-};
323
-
324
-
325
-/*
326
-*  edp_start
327
-*/
328
330
 
329
331
 &edp {
332
+	//hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;	
330
333
     force-hpd;
331
334
     status = "okay";
332
335
     ports {
..
..
@@ -336,70 +339,21 @@
336
339
                 remote-endpoint = <&panel_in>;
337
340
             };
338
341
         };
339
-    };
342
+   
343
+	};
340
344
 };
341
345
 
342
346
 &edp_phy {
343
-  status = "okay";
344
-
347
+	status = "okay";
345
348
 };
346
349
 
347
350
 &edp_in_vp0 {
348
-    status = "disabled";
349
-};
350
-
351
-&edp_in_vp1 {
352
-    status = "okay";
353
-
354
-};
355
-
356
-&route_edp {
357
-    status = "okay";
358
-    connect = <&vp1_out_edp>;
359
-};
360
-
361
-&route_edp {
362
-	status = "okay";
363
-};
364
-/*
365
-*  edp_end
366
-*/
367
-
368
-/*
369
-*  Hdmi_start
370
-*/
371
-
372
-&hdmi {
373
-	status = "okay";
374
-	rockchip,phy-table =
375
-		<92812500  0x8009 0x0000 0x0270>,
376
-		<165000000 0x800b 0x0000 0x026d>,
377
-		<185625000 0x800b 0x0000 0x01ed>,
378
-		<297000000 0x800b 0x0000 0x01ad>,
379
-		<594000000 0x8029 0x0000 0x0088>,
380
-		<000000000 0x0000 0x0000 0x0000>;
381
-};
382
-
383
-&route_hdmi {
384
-	status = "okay";
385
-	connect = <&vp0_out_hdmi>;
386
-};
387
-
388
-&hdmi_in_vp0 {
389
-	status = "okay";
390
-};
391
-
392
-&hdmi_in_vp1 {
393
351
 	status = "disabled";
394
352
 };
395
353
 
396
-&hdmi_sound {
354
+&edp_in_vp1 {
397
355
 	status = "okay";
398
356
 };
399
-
400
-/*
401
- *  Hdmi_END
402
-*/
403
357
 
404
358
 &gmac0 {
405
359
 	phy-mode = "rgmii";
..
..
@@ -459,9 +413,7 @@
459
413
  * power-supply should switche to vcc3v3_lcd1_n
460
414
  * when mipi panel is connected to dsi1.
461
415
  */
462
-&gt1x {
463
-	power-supply = <&vcc3v3_lcd0_n>;
464
-};
416
+
465
417
 
466
418
 &i2c3 {
467
419
 	status = "okay";
..
..
@@ -480,7 +432,7 @@
480
432
 };
481
433
 
482
434
 &i2c4 {
483
-	status = "okay";
435
+	status = "disabled";
484
436
 	gc8034: gc8034@37 {
485
437
 		compatible = "galaxycore,gc8034";
486
438
 		status = "okay";
..
..
@@ -526,7 +478,7 @@
526
478
 		};
527
479
 	};
528
480
 	ov5695: ov5695@36 {
529
-		status = "okay";
481
+		status = "disabled";
530
482
 		compatible = "ovti,ov5695";
531
483
 		reg = <0x36>;
532
484
 		clocks = <&cru CLK_CIF_OUT>;
..
..
@@ -549,19 +501,6 @@
549
501
 	};
550
502
 };
551
503
 
552
-&i2c5 {
553
-	status = "okay";
554
-
555
-	hym8563: hym8563@51 {
556
-		compatible = "haoyu,hym8563";
557
-		reg = <0x51>;
558
-		#clock-cells = <0>;
559
-		clock-frequency = <32768>;
560
-		clock-output-names = "xin32k";
561
-		/* rtc_int is not connected */
562
-	};
563
-};
564
-
565
504
 &mdio0 {
566
505
 	rgmii_phy0: phy@0 {
567
506
 		compatible = "ethernet-phy-ieee802.3-c22";
..
..
@@ -576,10 +515,16 @@
576
515
 	};
577
516
 };
578
517
 
518
+&video_phy0 {
519
+	status = "disabled";
520
+};
579
521
 
522
+&video_phy1 {
523
+	status = "disabled";
524
+};
580
525
 
581
526
 &pcie30phy {
582
-	status = "okay";
527
+	status = "disabled";
583
528
 };
584
529
 
585
530
 &pcie2x1 {
..
..
@@ -588,24 +533,23 @@
588
533
 	status = "okay";
589
534
 };
590
535
 
536
+&pcie3x2 {
537
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
538
+	vpcie3v3-supply = <&vcc3v3_pcie>;
539
+	status = "okay";
540
+};
541
+
591
542
 &pinctrl {
592
-//	cam {
593
-//		camera_pwr: camera-pwr {
594
-//			rockchip,pins =
595
-//				/* camera power en */
596
-//				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
597
-//		};
598
-//	};
543
+
599
544
 	headphone {
600
545
 		hp_det: hp-det {
601
-			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>,
602
-							<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
546
+			rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
603
547
 		};
604
548
 	};
605
549
 
606
550
 	wireless-wlan {
607
551
 		wifi_host_wake_irq: wifi-host-wake-irq {
608
-			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
552
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
609
553
 		};
610
554
 	};
611
555
 
..
..
@@ -615,12 +559,6 @@
615
559
 		};
616
560
 	};
617
561
 	
618
-	lcd1 {
619
-        lcd1_rst_gpio: lcd1-rst-gpio {
620
-            rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
621
-        };
622
-    };
623
-		
624
562
 	nk_io_init{
625
563
 		nk_io_gpio: nk-io-gpio{
626
564
 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
..
..
@@ -630,7 +568,7 @@
630
568
 							<4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
631
569
 							<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
632
570
 							<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>,
633
-							<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
571
+							<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>, 
634
572
 							<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
635
573
 							<1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
636
574
 							<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
..
..
@@ -646,6 +584,10 @@
646
584
 							<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
647
585
 		};
648
586
 	};
587
+};
588
+
589
+&rk809_sound {
590
+	hp-det-gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
649
591
 };
650
592
 
651
593
 &rkisp {
..
..
@@ -670,32 +612,36 @@
670
612
 	};
671
613
 };
672
614
 
615
+&route_dsi0 {
616
+	status = "disabled";
617
+	connect = <&vp1_out_dsi0>;
618
+};
673
619
 
674
620
 
675
621
 
622
+&route_edp {
623
+	status = "okay";
624
+	connect = <&vp1_out_edp>;
625
+};
676
626
 
677
627
 &sata2 {
678
628
 	status = "okay";
679
629
 };
680
630
 
681
631
 &sdmmc2 {
682
-        status = "disabled";
683
-};
684
-
685
-&sdmmc1 {
686
-        max-frequency = <150000000>;
687
-        supports-sdio;
688
-        bus-width = <4>;
689
-        disable-wp;
690
-        cap-sd-highspeed;
691
-        cap-sdio-irq;
692
-        keep-power-in-suspend;
693
-        mmc-pwrseq = <&sdio_pwrseq>;
694
-        non-removable;
695
-        pinctrl-names = "default";
696
-        pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
697
-        sd-uhs-sdr104;
698
-        status = "okay";
632
+	max-frequency = <150000000>;
633
+	supports-sdio;
634
+	bus-width = <4>;
635
+	disable-wp;
636
+	cap-sd-highspeed;
637
+	cap-sdio-irq;
638
+	keep-power-in-suspend;
639
+	mmc-pwrseq = <&sdio_pwrseq>;
640
+	non-removable;
641
+	pinctrl-names = "default";
642
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
643
+	sd-uhs-sdr104;
644
+	status = "okay";
699
645
 };
700
646
 
701
647
 &spdif_8ch {
..
..
@@ -736,8 +682,8 @@
736
682
 	pinctrl-0 = <&uart1m0_rtsn>;
737
683
 	pinctrl-1 = <&uart1_gpios>;
738
684
 	BT,reset_gpio    = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
739
-    BT,wake_gpio     = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
740
-    BT,wake_host_irq = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
685
+	BT,wake_gpio     = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
686
+	BT,wake_host_irq = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
741
687
 	status = "okay";
742
688
 };
743
689
 
..
..
@@ -774,4 +720,4 @@
774
720
 &uart9 {
775
721
 	status = "okay";
776
722
 	pinctrl-0 = <&uart9m1_xfer>;
777
-};
723
+};