disable i2c1

hc

2024-05-11 645e752c5a84baeb21015cdc85fc05b7d16312c8

 kernel/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
..
..
@@ -86,6 +86,10 @@
86
86
 			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
87
87
 			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
88
88
 			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
89
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)	/* sdmmc2_dat4.sdmmc2_dir_dat0 */
90
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)	/* sdmmc2_dat5.sdmmc2_dir_dat1 */
91
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)	/* sdmmc2_dat6.sdmmc2_dir_cmd */
92
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)	/* sdmmc2_dat7.sdmmc2_clkin */
89
93
 		>;
90
94
 	};
91
95
 
..
..
@@ -127,9 +131,13 @@
127
131
 		>;
128
132
 	};
129
133
 
134
+	/*
135
+	 * Note that gpio_150 pulled high with internal pull to prevent wlcore
136
+	 * reset on return from off mode in idle.
137
+	 */
130
138
 	wl12xx_gpio: pinmux_wl12xx_gpio {
131
139
 		pinctrl-single,pins = <
132
-			OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4)		/* uart1_cts.gpio_150 */
140
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE7)		/* uart1_cts.gpio_150 */
133
141
 			OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4)		/* uart1_rts.gpio_149 */
134
142
 		>;
135
143
 	};