disable i2c1

hc

2024-05-11 645e752c5a84baeb21015cdc85fc05b7d16312c8

 kernel/arch/arm/boot/dts/gemini.dtsi
..
..
@@ -357,7 +357,7 @@
357
357
 			};
358
358
 		};
359
359
 
360
-		ata@63000000 {
360
+		ide@63000000 {
361
361
 			compatible = "cortina,gemini-pata", "faraday,ftide010";
362
362
 			reg = <0x63000000 0x1000>;
363
363
 			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
..
..
@@ -366,9 +366,11 @@
366
366
 			clock-names = "PCLK";
367
367
 			sata = <&sata>;
368
368
 			status = "disabled";
369
+			#address-cells = <1>;
370
+			#size-cells = <0>;
369
371
 		};
370
372
 
371
-		ata@63400000 {
373
+		ide@63400000 {
372
374
 			compatible = "cortina,gemini-pata", "faraday,ftide010";
373
375
 			reg = <0x63400000 0x1000>;
374
376
 			interrupts = <5 IRQ_TYPE_EDGE_RISING>;
..
..
@@ -377,6 +379,8 @@
377
379
 			clock-names = "PCLK";
378
380
 			sata = <&sata>;
379
381
 			status = "disabled";
382
+			#address-cells = <1>;
383
+			#size-cells = <0>;
380
384
 		};
381
385
 
382
386
 		dma-controller@67000000 {
..
..
@@ -410,5 +414,37 @@
410
414
 			#size-cells = <0>;
411
415
 			status = "disabled";
412
416
 		};
417
+
418
+		usb@68000000 {
419
+			compatible = "cortina,gemini-usb", "faraday,fotg210";
420
+			reg = <0x68000000 0x1000>;
421
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
422
+			resets = <&syscon GEMINI_RESET_USB0>;
423
+			clocks = <&syscon GEMINI_CLK_GATE_USB0>;
424
+			clock-names = "PCLK";
425
+			/*
426
+			 * This will claim pins for USB0 and USB1 at the same
427
+			 * time as they are using some common pins. If you for
428
+			 * some reason have a system using USB1 at 96000000 but
429
+			 * NOT using USB0 at 68000000 you wll have to add the
430
+			 * usb_default_pins to the USB controller at 96000000
431
+			 * in your .dts for the board.
432
+			 */
433
+			pinctrl-names = "default";
434
+			pinctrl-0 = <&usb_default_pins>;
435
+			syscon = <&syscon>;
436
+			status = "disabled";
437
+		};
438
+
439
+		usb@69000000 {
440
+			compatible = "cortina,gemini-usb", "faraday,fotg210";
441
+			reg = <0x69000000 0x1000>;
442
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
443
+			resets = <&syscon GEMINI_RESET_USB1>;
444
+			clocks = <&syscon GEMINI_CLK_GATE_USB1>;
445
+			clock-names = "PCLK";
446
+			syscon = <&syscon>;
447
+			status = "disabled";
448
+		};
413
449
 	};
414
450
 };