forked from ~ljy/RK356X_SDK_RELEASE
blame | history | patch | commit | commitdiff
hc
2024-05-10 61598093bbdd283a7edc367d900f223070ead8d2 
 kernel/drivers/usb/serial/cp210x.c
....@@ -50,6 +50,9 @@
5050 static int cp210x_port_probe(struct usb_serial_port *);
5151 static int cp210x_port_remove(struct usb_serial_port *);
5252 static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
53
+static void cp210x_process_read_urb(struct urb *urb);
54
+static void cp210x_enable_event_mode(struct usb_serial_port *port);
55
+static void cp210x_disable_event_mode(struct usb_serial_port *port);
5356 
5457 static const struct usb_device_id id_table[] = {
5558 	{ USB_DEVICE(0x0404, 0x034C) },	/* NCR Retail IO Box */
....@@ -61,6 +64,7 @@
6164 	{ USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
6265 	{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
6366 	{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
67
+	{ USB_DEVICE(0x0908, 0x0070) }, /* Siemens SCALANCE LPE-9000 USB Serial Console */
6468 	{ USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */
6569 	{ USB_DEVICE(0x0988, 0x0578) }, /* Teraoka AD2000 */
6670 	{ USB_DEVICE(0x0B00, 0x3070) }, /* Ingenico 3070 */
....@@ -120,6 +124,7 @@
120124 	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
121125 	{ USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */
122126 	{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
127
+	{ USB_DEVICE(0x10C4, 0x82AA) }, /* Silicon Labs IFS-USB-DATACABLE used with Quint UPS */
123128 	{ USB_DEVICE(0x10C4, 0x82EF) }, /* CESINEL FALCO 6105 AC Power Supply */
124129 	{ USB_DEVICE(0x10C4, 0x82F1) }, /* CESINEL MEDCAL EFD Earth Fault Detector */
125130 	{ USB_DEVICE(0x10C4, 0x82F2) }, /* CESINEL MEDCAL ST Network Analyzer */
....@@ -131,6 +136,7 @@
131136 	{ USB_DEVICE(0x10C4, 0x83AA) }, /* Mark-10 Digital Force Gauge */
132137 	{ USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
133138 	{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
139
+	{ USB_DEVICE(0x10C4, 0x8414) }, /* Decagon USB Cable Adapter */
134140 	{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
135141 	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
136142 	{ USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */
....@@ -195,6 +201,10 @@
195201 	{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
196202 	{ USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
197203 	{ USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
204
+	{ USB_DEVICE(0x17A8, 0x0011) }, /* Kamstrup 444 MHz RF sniffer */
205
+	{ USB_DEVICE(0x17A8, 0x0013) }, /* Kamstrup 870 MHz RF sniffer */
206
+	{ USB_DEVICE(0x17A8, 0x0101) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Int Ant) */
207
+	{ USB_DEVICE(0x17A8, 0x0102) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Ext Ant) */
198208 	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
199209 	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
200210 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
....@@ -257,13 +267,27 @@
257267 	u8			gpio_input;
258268 #endif
259269 	u8			partnum;
270
+	speed_t			min_speed;
260271 	speed_t			max_speed;
261272 	bool			use_actual_rate;
273
+	bool			no_event_mode;
274
+};
275
+
276
+enum cp210x_event_state {
277
+	ES_DATA,
278
+	ES_ESCAPE,
279
+	ES_LSR,
280
+	ES_LSR_DATA_0,
281
+	ES_LSR_DATA_1,
282
+	ES_MSR
262283 };
263284 
264285 struct cp210x_port_private {
265
-	__u8			bInterfaceNumber;
286
+	u8			bInterfaceNumber;
266287 	bool			has_swapped_line_ctl;
288
+	bool			event_mode;
289
+	enum cp210x_event_state event_state;
290
+	u8 lsr;
267291 };
268292 
269293 static struct usb_serial_driver cp210x_device = {
....@@ -284,12 +308,14 @@
284308 	.unthrottle		= usb_serial_generic_unthrottle,
285309 	.tiocmget		= cp210x_tiocmget,
286310 	.tiocmset		= cp210x_tiocmset,
311
+	.get_icount		= usb_serial_generic_get_icount,
287312 	.attach			= cp210x_attach,
288313 	.disconnect		= cp210x_disconnect,
289314 	.release		= cp210x_release,
290315 	.port_probe		= cp210x_port_probe,
291316 	.port_remove		= cp210x_port_remove,
292
-	.dtr_rts		= cp210x_dtr_rts
317
+	.dtr_rts		= cp210x_dtr_rts,
318
+	.process_read_urb	= cp210x_process_read_urb,
293319 };
294320 
295321 static struct usb_serial_driver * const serial_drivers[] = {
....@@ -411,13 +437,22 @@
411437  */
412438 #define PURGE_ALL		0x000f
413439 
440
+/* CP210X_EMBED_EVENTS */
441
+#define CP210X_ESCCHAR		0xec
442
+
443
+#define CP210X_LSR_OVERRUN	BIT(1)
444
+#define CP210X_LSR_PARITY	BIT(2)
445
+#define CP210X_LSR_FRAME	BIT(3)
446
+#define CP210X_LSR_BREAK	BIT(4)
447
+
448
+
414449 /* CP210X_GET_FLOW/CP210X_SET_FLOW read/write these 0x10 bytes */
415450 struct cp210x_flow_ctl {
416451 	__le32	ulControlHandshake;
417452 	__le32	ulFlowReplace;
418453 	__le32	ulXonLimit;
419454 	__le32	ulXoffLimit;
420
-} __packed;
455
+};
421456 
422457 /* cp210x_flow_ctl::ulControlHandshake */
423458 #define CP210X_SERIAL_DTR_MASK		GENMASK(1, 0)
....@@ -451,16 +486,16 @@
451486 struct cp210x_pin_mode {
452487 	u8	eci;
453488 	u8	sci;
454
-} __packed;
489
+};
455490 
456491 #define CP210X_PIN_MODE_MODEM		0
457492 #define CP210X_PIN_MODE_GPIO		BIT(0)
458493 
459494 /*
460
- * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0xf bytes.
461
- * Structure needs padding due to unused/unspecified bytes.
495
+ * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0xf bytes
496
+ * on a CP2105 chip. Structure needs padding due to unused/unspecified bytes.
462497  */
463
-struct cp210x_config {
498
+struct cp210x_dual_port_config {
464499 	__le16	gpio_mode;
465500 	u8	__pad0[2];
466501 	__le16	reset_state;
....@@ -471,6 +506,19 @@
471506 	u8	device_cfg;
472507 } __packed;
473508 
509
+/*
510
+ * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0xd bytes
511
+ * on a CP2104 chip. Structure needs padding due to unused/unspecified bytes.
512
+ */
513
+struct cp210x_single_port_config {
514
+	__le16	gpio_mode;
515
+	u8	__pad0[2];
516
+	__le16	reset_state;
517
+	u8	__pad1[4];
518
+	__le16	suspend_state;
519
+	u8	device_cfg;
520
+} __packed;
521
+
474522 /* GPIO modes */
475523 #define CP210X_SCI_GPIO_MODE_OFFSET	9
476524 #define CP210X_SCI_GPIO_MODE_MASK	GENMASK(11, 9)
....@@ -478,10 +526,18 @@
478526 #define CP210X_ECI_GPIO_MODE_OFFSET	2
479527 #define CP210X_ECI_GPIO_MODE_MASK	GENMASK(3, 2)
480528 
529
+#define CP210X_GPIO_MODE_OFFSET		8
530
+#define CP210X_GPIO_MODE_MASK		GENMASK(11, 8)
531
+
481532 /* CP2105 port configuration values */
482533 #define CP2105_GPIO0_TXLED_MODE		BIT(0)
483534 #define CP2105_GPIO1_RXLED_MODE		BIT(1)
484535 #define CP2105_GPIO1_RS485_MODE		BIT(2)
536
+
537
+/* CP2104 port configuration values */
538
+#define CP2104_GPIO0_TXLED_MODE		BIT(0)
539
+#define CP2104_GPIO1_RXLED_MODE		BIT(1)
540
+#define CP2104_GPIO2_RS485_MODE		BIT(2)
485541 
486542 /* CP2102N configuration array indices */
487543 #define CP210X_2NCONFIG_CONFIG_VERSION_IDX	2
....@@ -499,7 +555,7 @@
499555 struct cp210x_gpio_write {
500556 	u8	mask;
501557 	u8	state;
502
-} __packed;
558
+};
503559 
504560 /*
505561  * Helper to get interface number when we only have struct usb_serial.
....@@ -802,6 +858,7 @@
802858 
803859 static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
804860 {
861
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
805862 	int result;
806863 
807864 	result = cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_ENABLE);
....@@ -813,21 +870,144 @@
813870 	/* Configure the termios structure */
814871 	cp210x_get_termios(tty, port);
815872 
816
-	/* The baud rate must be initialised on cp2104 */
817
-	if (tty)
873
+	if (tty) {
874
+		/* The baud rate must be initialised on cp2104 */
818875 		cp210x_change_speed(tty, port, NULL);
819876 
820
-	return usb_serial_generic_open(tty, port);
877
+		if (I_INPCK(tty))
878
+			cp210x_enable_event_mode(port);
879
+	}
880
+
881
+	result = usb_serial_generic_open(tty, port);
882
+	if (result)
883
+		goto err_disable;
884
+
885
+	return 0;
886
+
887
+err_disable:
888
+	cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE);
889
+	port_priv->event_mode = false;
890
+
891
+	return result;
821892 }
822893 
823894 static void cp210x_close(struct usb_serial_port *port)
824895 {
896
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
897
+
825898 	usb_serial_generic_close(port);
826899 
827900 	/* Clear both queues; cp2108 needs this to avoid an occasional hang */
828901 	cp210x_write_u16_reg(port, CP210X_PURGE, PURGE_ALL);
829902 
830903 	cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE);
904
+
905
+	/* Disabling the interface disables event-insertion mode. */
906
+	port_priv->event_mode = false;
907
+}
908
+
909
+static void cp210x_process_lsr(struct usb_serial_port *port, unsigned char lsr, char *flag)
910
+{
911
+	if (lsr & CP210X_LSR_BREAK) {
912
+		port->icount.brk++;
913
+		*flag = TTY_BREAK;
914
+	} else if (lsr & CP210X_LSR_PARITY) {
915
+		port->icount.parity++;
916
+		*flag = TTY_PARITY;
917
+	} else if (lsr & CP210X_LSR_FRAME) {
918
+		port->icount.frame++;
919
+		*flag = TTY_FRAME;
920
+	}
921
+
922
+	if (lsr & CP210X_LSR_OVERRUN) {
923
+		port->icount.overrun++;
924
+		tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
925
+	}
926
+}
927
+
928
+static bool cp210x_process_char(struct usb_serial_port *port, unsigned char *ch, char *flag)
929
+{
930
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
931
+
932
+	switch (port_priv->event_state) {
933
+	case ES_DATA:
934
+		if (*ch == CP210X_ESCCHAR) {
935
+			port_priv->event_state = ES_ESCAPE;
936
+			break;
937
+		}
938
+		return false;
939
+	case ES_ESCAPE:
940
+		switch (*ch) {
941
+		case 0:
942
+			dev_dbg(&port->dev, "%s - escape char\n", __func__);
943
+			*ch = CP210X_ESCCHAR;
944
+			port_priv->event_state = ES_DATA;
945
+			return false;
946
+		case 1:
947
+			port_priv->event_state = ES_LSR_DATA_0;
948
+			break;
949
+		case 2:
950
+			port_priv->event_state = ES_LSR;
951
+			break;
952
+		case 3:
953
+			port_priv->event_state = ES_MSR;
954
+			break;
955
+		default:
956
+			dev_err(&port->dev, "malformed event 0x%02x\n", *ch);
957
+			port_priv->event_state = ES_DATA;
958
+			break;
959
+		}
960
+		break;
961
+	case ES_LSR_DATA_0:
962
+		port_priv->lsr = *ch;
963
+		port_priv->event_state = ES_LSR_DATA_1;
964
+		break;
965
+	case ES_LSR_DATA_1:
966
+		dev_dbg(&port->dev, "%s - lsr = 0x%02x, data = 0x%02x\n",
967
+				__func__, port_priv->lsr, *ch);
968
+		cp210x_process_lsr(port, port_priv->lsr, flag);
969
+		port_priv->event_state = ES_DATA;
970
+		return false;
971
+	case ES_LSR:
972
+		dev_dbg(&port->dev, "%s - lsr = 0x%02x\n", __func__, *ch);
973
+		port_priv->lsr = *ch;
974
+		cp210x_process_lsr(port, port_priv->lsr, flag);
975
+		port_priv->event_state = ES_DATA;
976
+		break;
977
+	case ES_MSR:
978
+		dev_dbg(&port->dev, "%s - msr = 0x%02x\n", __func__, *ch);
979
+		/* unimplemented */
980
+		port_priv->event_state = ES_DATA;
981
+		break;
982
+	}
983
+
984
+	return true;
985
+}
986
+
987
+static void cp210x_process_read_urb(struct urb *urb)
988
+{
989
+	struct usb_serial_port *port = urb->context;
990
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
991
+	unsigned char *ch = urb->transfer_buffer;
992
+	char flag;
993
+	int i;
994
+
995
+	if (!urb->actual_length)
996
+		return;
997
+
998
+	if (port_priv->event_mode) {
999
+		for (i = 0; i < urb->actual_length; i++, ch++) {
1000
+			flag = TTY_NORMAL;
1001
+
1002
+			if (cp210x_process_char(port, ch, &flag))
1003
+				continue;
1004
+
1005
+			tty_insert_flip_char(&port->port, *ch, flag);
1006
+		}
1007
+	} else {
1008
+		tty_insert_flip_string(&port->port, ch, urb->actual_length);
1009
+	}
1010
+	tty_flip_buffer_push(&port->port);
8311011 }
8321012 
8331013 /*
....@@ -1088,13 +1268,10 @@
10881268 	return cp210x_an205_table1[i].rate;
10891269 }
10901270 
1091
-static speed_t cp210x_get_actual_rate(struct usb_serial *serial, speed_t baud)
1271
+static speed_t cp210x_get_actual_rate(speed_t baud)
10921272 {
1093
-	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
10941273 	unsigned int prescale = 1;
10951274 	unsigned int div;
1096
-
1097
-	baud = clamp(baud, 300u, priv->max_speed);
10981275 
10991276 	if (baud <= 365)
11001277 		prescale = 4;
....@@ -1138,20 +1315,18 @@
11381315 	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
11391316 	u32 baud;
11401317 
1141
-	baud = tty->termios.c_ospeed;
1142
-
11431318 	/*
11441319 	 * This maps the requested rate to the actual rate, a valid rate on
11451320 	 * cp2102 or cp2103, or to an arbitrary rate in [1M, max_speed].
11461321 	 *
11471322 	 * NOTE: B0 is not implemented.
11481323 	 */
1324
+	baud = clamp(tty->termios.c_ospeed, priv->min_speed, priv->max_speed);
1325
+
11491326 	if (priv->use_actual_rate)
1150
-		baud = cp210x_get_actual_rate(serial, baud);
1327
+		baud = cp210x_get_actual_rate(baud);
11511328 	else if (baud < 1000000)
11521329 		baud = cp210x_get_an205_rate(baud);
1153
-	else if (baud > priv->max_speed)
1154
-		baud = priv->max_speed;
11551330 
11561331 	dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud);
11571332 	if (cp210x_write_u32_reg(port, CP210X_SET_BAUDRATE, baud)) {
....@@ -1163,6 +1338,45 @@
11631338 	}
11641339 
11651340 	tty_encode_baud_rate(tty, baud, baud);
1341
+}
1342
+
1343
+static void cp210x_enable_event_mode(struct usb_serial_port *port)
1344
+{
1345
+	struct cp210x_serial_private *priv = usb_get_serial_data(port->serial);
1346
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
1347
+	int ret;
1348
+
1349
+	if (port_priv->event_mode)
1350
+		return;
1351
+
1352
+	if (priv->no_event_mode)
1353
+		return;
1354
+
1355
+	port_priv->event_state = ES_DATA;
1356
+	port_priv->event_mode = true;
1357
+
1358
+	ret = cp210x_write_u16_reg(port, CP210X_EMBED_EVENTS, CP210X_ESCCHAR);
1359
+	if (ret) {
1360
+		dev_err(&port->dev, "failed to enable events: %d\n", ret);
1361
+		port_priv->event_mode = false;
1362
+	}
1363
+}
1364
+
1365
+static void cp210x_disable_event_mode(struct usb_serial_port *port)
1366
+{
1367
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
1368
+	int ret;
1369
+
1370
+	if (!port_priv->event_mode)
1371
+		return;
1372
+
1373
+	ret = cp210x_write_u16_reg(port, CP210X_EMBED_EVENTS, 0);
1374
+	if (ret) {
1375
+		dev_err(&port->dev, "failed to disable events: %d\n", ret);
1376
+		return;
1377
+	}
1378
+
1379
+	port_priv->event_mode = false;
11661380 }
11671381 
11681382 static void cp210x_set_termios(struct tty_struct *tty,
....@@ -1287,6 +1501,14 @@
12871501 				sizeof(flow_ctl));
12881502 	}
12891503 
1504
+	/*
1505
+	 * Enable event-insertion mode only if input parity checking is
1506
+	 * enabled for now.
1507
+	 */
1508
+	if (I_INPCK(tty))
1509
+		cp210x_enable_event_mode(port);
1510
+	else
1511
+		cp210x_disable_event_mode(port);
12901512 }
12911513 
12921514 static int cp210x_tiocmset(struct tty_struct *tty,
....@@ -1518,7 +1740,7 @@
15181740 {
15191741 	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
15201742 	struct cp210x_pin_mode mode;
1521
-	struct cp210x_config config;
1743
+	struct cp210x_dual_port_config config;
15221744 	u8 intf_num = cp210x_interface_num(serial);
15231745 	u8 iface_config;
15241746 	int result;
....@@ -1579,6 +1801,56 @@
15791801 	return 0;
15801802 }
15811803 
1804
+static int cp2104_gpioconf_init(struct usb_serial *serial)
1805
+{
1806
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1807
+	struct cp210x_single_port_config config;
1808
+	u8 iface_config;
1809
+	u8 gpio_latch;
1810
+	int result;
1811
+	u8 i;
1812
+
1813
+	result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
1814
+					  CP210X_GET_PORTCONFIG, &config,
1815
+					  sizeof(config));
1816
+	if (result < 0)
1817
+		return result;
1818
+
1819
+	priv->gc.ngpio = 4;
1820
+
1821
+	iface_config = config.device_cfg;
1822
+	priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) &
1823
+					CP210X_GPIO_MODE_MASK) >>
1824
+					CP210X_GPIO_MODE_OFFSET);
1825
+	gpio_latch = (u8)((le16_to_cpu(config.reset_state) &
1826
+					CP210X_GPIO_MODE_MASK) >>
1827
+					CP210X_GPIO_MODE_OFFSET);
1828
+
1829
+	/* mark all pins which are not in GPIO mode */
1830
+	if (iface_config & CP2104_GPIO0_TXLED_MODE)	/* GPIO 0 */
1831
+		priv->gpio_altfunc |= BIT(0);
1832
+	if (iface_config & CP2104_GPIO1_RXLED_MODE)	/* GPIO 1 */
1833
+		priv->gpio_altfunc |= BIT(1);
1834
+	if (iface_config & CP2104_GPIO2_RS485_MODE)	/* GPIO 2 */
1835
+		priv->gpio_altfunc |= BIT(2);
1836
+
1837
+	/*
1838
+	 * Like CP2102N, CP2104 has also no strict input and output pin
1839
+	 * modes.
1840
+	 * Do the same input mode emulation as CP2102N.
1841
+	 */
1842
+	for (i = 0; i < priv->gc.ngpio; ++i) {
1843
+		/*
1844
+		 * Set direction to "input" iff pin is open-drain and reset
1845
+		 * value is 1.
1846
+		 */
1847
+		if (!(priv->gpio_pushpull & BIT(i)) && (gpio_latch & BIT(i)))
1848
+			priv->gpio_input |= BIT(i);
1849
+	}
1850
+
1851
+	return 0;
1852
+}
1853
+
15821854 static int cp2102n_gpioconf_init(struct usb_serial *serial)
15831855 {
15841856 	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
....@@ -1624,12 +1896,6 @@
16241896 	if (config_version != 0x01)
16251897 		return -ENOTSUPP;
16261898 
1627
-	/*
1628
-	 * We only support 4 GPIOs even on the QFN28 package, because
1629
-	 * config locations of GPIOs 4-6 determined using reverse
1630
-	 * engineering revealed conflicting offsets with other
1631
-	 * documented functions. So we'll just play it safe for now.
1632
-	 */
16331899 	priv->gc.ngpio = 4;
16341900 
16351901 	/*
....@@ -1654,6 +1920,19 @@
16541920 			priv->gpio_altfunc |= BIT(3);
16551921 	} else {
16561922 		priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f;
1923
+	}
1924
+
1925
+	if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN28) {
1926
+		/*
1927
+		 * For the QFN28 package, GPIO4-6 are controlled by
1928
+		 * the low three bits of the mode/latch fields.
1929
+		 * Contrary to the document linked above, the bits for
1930
+		 * the SUSPEND pins are elsewhere.  No alternate
1931
+		 * function is available for these pins.
1932
+		 */
1933
+		priv->gc.ngpio = 7;
1934
+		gpio_latch |= (gpio_rst_latch & 7) << 4;
1935
+		priv->gpio_pushpull |= (gpio_pushpull & 7) << 4;
16571936 	}
16581937 
16591938 	/*
....@@ -1682,6 +1961,9 @@
16821961 	int result;
16831962 
16841963 	switch (priv->partnum) {
1964
+	case CP210X_PARTNUM_CP2104:
1965
+		result = cp2104_gpioconf_init(serial);
1966
+		break;
16851967 	case CP210X_PARTNUM_CP2105:
16861968 		result = cp2105_gpioconf_init(serial);
16871969 		break;
....@@ -1778,6 +2060,7 @@
17782060 {
17792061 	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
17802062 	bool use_actual_rate = false;
2063
+	speed_t min = 300;
17812064 	speed_t max;
17822065 
17832066 	switch (priv->partnum) {
....@@ -1800,6 +2083,7 @@
18002083 			use_actual_rate = true;
18012084 			max = 2000000;	/* ECI */
18022085 		} else {
2086
+			min = 2400;
18032087 			max = 921600;	/* SCI */
18042088 		}
18052089 		break;
....@@ -1814,8 +2098,49 @@
18142098 		break;
18152099 	}
18162100 
2101
+	priv->min_speed = min;
18172102 	priv->max_speed = max;
18182103 	priv->use_actual_rate = use_actual_rate;
2104
+}
2105
+
2106
+static void cp2102_determine_quirks(struct usb_serial *serial)
2107
+{
2108
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
2109
+	u8 *buf;
2110
+	int ret;
2111
+
2112
+	buf = kmalloc(2, GFP_KERNEL);
2113
+	if (!buf)
2114
+		return;
2115
+	/*
2116
+	 * Some (possibly counterfeit) CP2102 do not support event-insertion
2117
+	 * mode and respond differently to malformed vendor requests.
2118
+	 * Specifically, they return one instead of two bytes when sent a
2119
+	 * two-byte part-number request.
2120
+	 */
2121
+	ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
2122
+			CP210X_VENDOR_SPECIFIC, REQTYPE_DEVICE_TO_HOST,
2123
+			CP210X_GET_PARTNUM, 0, buf, 2, USB_CTRL_GET_TIMEOUT);
2124
+	if (ret == 1) {
2125
+		dev_dbg(&serial->interface->dev,
2126
+				"device does not support event-insertion mode\n");
2127
+		priv->no_event_mode = true;
2128
+	}
2129
+
2130
+	kfree(buf);
2131
+}
2132
+
2133
+static void cp210x_determine_quirks(struct usb_serial *serial)
2134
+{
2135
+	struct cp210x_serial_private *priv = usb_get_serial_data(serial);
2136
+
2137
+	switch (priv->partnum) {
2138
+	case CP210X_PARTNUM_CP2102:
2139
+		cp2102_determine_quirks(serial);
2140
+		break;
2141
+	default:
2142
+		break;
2143
+	}
18192144 }
18202145 
18212146 static int cp210x_attach(struct usb_serial *serial)
....@@ -1838,6 +2163,7 @@
18382163 
18392164 	usb_set_serial_data(serial, priv);
18402165 
2166
+	cp210x_determine_quirks(serial);
18412167 	cp210x_init_max_speed(serial);
18422168 
18432169 	result = cp210x_gpio_init(serial);