forked from ~ljy/RK356X_SDK_RELEASE
blame | history | patch | commit | commitdiff
hc
2024-05-10 61598093bbdd283a7edc367d900f223070ead8d2 
 kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
....@@ -16,6 +16,14 @@
1616 	model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
1717 	compatible = "rockchip,rk3568-evb1-ddr4-v10", "rockchip,rk3568";
1818 
19
+	rk_headset: rk-headset {
20
+		compatible = "rockchip_headset";
21
+		headset_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
22
+		spk_ctl_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;//AMP_SD_GPIO4_C2_3V3
23
+		pinctrl-names = "default";
24
+		pinctrl-0 = <&hp_det>;
25
+	};
26
+
1927 	vcc2v5_sys: vcc2v5-ddr {
2028 		compatible = "regulator-fixed";
2129 		regulator-name = "vcc2v5-sys";
....@@ -26,15 +34,6 @@
2634 		vin-supply = <&vcc3v3_sys>;
2735 	};
2836 
29
-	vcc3v3_vga: vcc3v3-vga {
30
-		compatible = "regulator-fixed";
31
-		regulator-name = "vcc3v3_vga";
32
-		regulator-always-on;
33
-		regulator-boot-on;
34
-		gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
35
-		enable-active-high;
36
-		vin-supply = <&vcc3v3_sys>;
37
-	};
3837 
3938 	pcie30_avdd0v9: pcie30-avdd0v9 {
4039 		compatible = "regulator-fixed";
....@@ -61,7 +60,9 @@
6160 		regulator-name = "vcc3v3_pcie";
6261 		regulator-min-microvolt = <3300000>;
6362 		regulator-max-microvolt = <3300000>;
63
+		regulator-always-on;
6464 		enable-active-high;
65
+		regulator-boot-on;
6566 		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
6667 		startup-delay-us = <5000>;
6768 		vin-supply = <&dc_12v>;
....@@ -86,8 +87,25 @@
8687 		enable-active-high;
8788 		regulator-always-on;
8889 		regulator-boot-on;
89
-	};
90
+    	};
9091 #endif
92
+
93
+		leds: leds {
94
+		compatible = "gpio-leds";
95
+		sig_led: sig_led {
96
+			gpios = <&gpio4 RK_PC3 GPIO_ACTIVE_HIGH>;
97
+			default-state = "on";
98
+		};
99
+	};
100
+	
101
+		leds: leds {
102
+		compatible = "gpio-leds";	
103
+		err_led: err_led {
104
+			gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
105
+			default-state = "on";
106
+		};
107
+	};
108
+
91109 
92110 	ndj_io_init {
93111          	compatible = "nk_io_control";	
....@@ -103,6 +121,11 @@
103121 			
104122 			vcc_12v {
105123 				gpio_num = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;  //VCC12_IO_EN_GPIO0_C7_3V3
124
+				gpio_function = <0>;
125
+			};
126
+			
127
+			vcc_3.3v {
128
+				gpio_num = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
106129 				gpio_function = <0>;
107130 			};
108131 			
....@@ -136,17 +159,15 @@
136159 				gpio_function = <0>;
137160 			};
138161 			
139
-			hp_en {
140
-				gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
162
+			//gpio99 {
163
+			//	gpio_num = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;//HP_EN_GPIO3_A6_3V3
164
+			//	gpio_function = <1>;
165
+			//};
166
+			
167
+			wifi_power_en {
168
+				gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
141169 				gpio_function = <0>;
142170 			};
143
-			
144
-			usb_ogt {
145
-				gpio_num = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; //OTG_EN_OC_GPIO0_C2
146
-				gpio_function = <0>;
147
-			};
148
-			
149
-			 
150171 	#if 0		
151172 			do1 {
152173 				gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>; 
....@@ -188,19 +209,44 @@
188209 				gpio_function = <1>;
189210 			};
190211 	#endif
191
-	};
192
-	
193
-			panel: panel {
212
+		};
213
+#if 0			
214
+	    nk_io_init {
215
+                compatible = "nk_io_control";
216
+//				vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
217
+                hub_host2_5V_rest_gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
218
+                hub_host3_5v_gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
219
+                vcc_5v_io = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;   //VCC5_IO_EN_GPIO1_A4_3V3
220
+                vcc_12v_io = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
221
+                en_4g_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
222
+                reset_4g_gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; //4G_RST_GPIO01_B2_3V3
223
+                air_mode_4g_gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; //4G_AIR_MODE_GPIO01_B0_3V3
224
+                wake_4g_gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; //4G_WAKEUP_GPIO01_B1_3V3
225
+				hp_en_gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
226
+//              spk_out_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;//AMP_SD_GPIO4_C2_3V3			
227
+				wifi_power_en_gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
228
+//				pcie_power_en_gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;//PCIE_PWREN_H_GPIO0_D4				
229
+				pinctrl-names = "default";
230
+				pinctrl-0 = <&nk_io_gpio>;				
231
+        };
232
+#endif	
233
+		panel: panel {
194234 				compatible = "simple-panel";
195235 				backlight = <&backlight>;
196236 				power-supply = <&vcc3v3_lcd0_n>;
197
-				enable-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; //LCD0_VDD_H_GPIO2_D4				
198
-				edp-bl-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;  //LCD0_PWBLK_H_GPIO0_B7
237
+				enable-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; //LCD0_VDD_H_GPIO2_D4
238
+				reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>; //7511_RST_GPIO3_D1
239
+				edp-bl-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;  //LCD0_BKLT_EN_3V3
199240 				edp-bl-en = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
200241 				bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
201242 				bpc = <8>;
202243 				prepare-delay-ms = <200>;
203244 				enable-delay-ms = <20>;
245
+				lvds-gpio0 = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; //7511_GPIO0-GPIO3_D2 
246
+				lvds-gpio1 = <&gpio3 RK_PD3 GPIO_ACTIVE_HIGH>; //7511_GPIO1-GPIO3_D3 
247
+				lvds-gpio2 = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; //7511_GPIO2-GPIO3_D4 
248
+				lvds-gpio3 = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; //7511_GPIO3-GPIO3_D5
249
+				nodka-lvds = <15>;
204250 
205251 				display-timings {
206252                 native-mode = <&timing>;
....@@ -288,6 +334,10 @@
288334  * video_phy0 needs to be enabled
289335  * when dsi0 is enabled
290336  */
337
+&video_phy0 {
338
+	status = "disabled";
339
+};
340
+
291341 &dsi0 {
292342 	status = "disabled";
293343 };
....@@ -308,6 +358,10 @@
308358  * video_phy1 needs to be enabled
309359  * when dsi1 is enabled
310360  */
361
+ 
362
+&video_phy1 {
363
+	status = "disabled";
364
+}; 
311365 &dsi1 {
312366 	status = "disabled";
313367 };
....@@ -321,48 +375,111 @@
321375 };
322376 
323377 &dsi1_panel {
324
-	power-supply = <&vcc3v3_lcd1_n>;
378
+//	power-supply = <&vcc3v3_lcd1_n>;   //MIPI_3V3EN_GPIO3_A3_d_3V3
379
+    vddio-mipi = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; //MIPI_EN_1V8_GPIO3_A4_d_3V3
380
+    reset-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>; //MIPI_RST_L_GPIO3_C7
381
+    vcc-5v-gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
382
+    pinctrl-names = "default";
383
+    pinctrl-0 = <&lcd1_rst_gpio>;
325384 };
326385 
386
+&route_dsi1 {
387
+	status = "disabled";
388
+	connect = <&vp1_out_dsi1>;
389
+};
390
+
391
+
392
+/*
393
+*  edp_start
394
+*/
395
+
327396 &edp {
328
-	//hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;	
329397     force-hpd;
398
+	status = "disabled";
399
+};
400
+
401
+&edp_phy {
402
+	status = "disabled";
403
+};
404
+
405
+&edp_in_vp0 {
330406     status = "disabled";
331407 };
332408 
409
+&edp_in_vp1 {
410
+    status = "disabled";
411
+
412
+};
413
+
414
+&route_edp {
415
+    status = "disabled";
416
+    connect = <&vp1_out_edp>;
417
+};
418
+
419
+&route_edp {
420
+	status = "disabled";
421
+};
422
+
333423 &lvds {
334
-    status = "okay";
335
-    ports {
336
-        port@1 {
337
-            reg = <1>;
338
-            lvds_out: endpoint {
339
-                remote-endpoint = <&panel_in_lvds>;
340
-            };
341
-        };
342
-   
424
+	status = "disabled";
425
+	ports {
426
+		port@1 {
427
+			reg = <1>;
428
+			lvds_out:endpoint {
429
+				remote-endpoint = <&panel_in_lvds>;
430
+			};
431
+		};
343432 	};
344433 };
345434 
346435 &route_lvds{
347
-	 status = "okay";
348
-	 connect = <&vp2_out_lvds>;
349
-};
350
-
351
-&lvds_in_vp2 {
352436 	status = "okay";
437
+	connect = <&vp1_out_lvds>;
353438 };
354439 
355
-&edp_phy {
356
-	status = "okay";
357
-};
358
-
359
-&edp_in_vp0 {
440
+&lvds_in_vp1 {
360441 	status = "disabled";
361442 };
362443 
363
-&edp_in_vp1 {
444
+/*
445
+*  edp_end
446
+*/
447
+
448
+/*
449
+*  Hdmi_start
450
+*/
451
+
452
+&hdmi {
453
+	status = "okay";
454
+	rockchip,phy-table =
455
+		<92812500  0x8009 0x0000 0x0270>,
456
+		<165000000 0x800b 0x0000 0x026d>,
457
+		<185625000 0x800b 0x0000 0x01ed>,
458
+		<297000000 0x800b 0x0000 0x01ad>,
459
+		<594000000 0x8029 0x0000 0x0088>,
460
+		<000000000 0x0000 0x0000 0x0000>;
461
+};
462
+
463
+&route_hdmi {
464
+	status = "okay";
465
+	connect = <&vp0_out_hdmi>;
466
+};
467
+
468
+&hdmi_in_vp0 {
364469 	status = "okay";
365470 };
471
+
472
+&hdmi_in_vp1 {
473
+	status = "disabled";
474
+};
475
+
476
+&hdmi_sound {
477
+	status = "okay";
478
+};
479
+
480
+/*
481
+ *  Hdmi_END
482
+*/
366483 
367484 &gmac0 {
368485 	phy-mode = "rgmii";
....@@ -388,7 +505,9 @@
388505 	rx_delay = <0x2f>;
389506 
390507 	phy-handle = <&rgmii_phy0>;
508
+	
391509 	status = "disabled";
510
+	
392511 };
393512 
394513 &gmac1 {
....@@ -453,7 +572,6 @@
453572 		reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
454573 		pwdn-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_LOW>;
455574 		rockchip,grf = <&grf>;
456
-		power-domains = <&power RK3568_PD_VI>;
457575 		rockchip,camera-module-index = <0>;
458576 		rockchip,camera-module-facing = "back";
459577 		rockchip,camera-module-name = "RK-CMK-8M-2-v1";
....@@ -510,6 +628,19 @@
510628 	};
511629 };
512630 
631
+&i2c5 {
632
+	status = "okay";
633
+
634
+	hym8563: hym8563@51 {
635
+		compatible = "haoyu,hym8563";
636
+		reg = <0x51>;
637
+		#clock-cells = <0>;
638
+		clock-frequency = <32768>;
639
+		clock-output-names = "xin32k";
640
+		/* rtc_int is not connected */
641
+	};
642
+};
643
+
513644 &mdio0 {
514645 	rgmii_phy0: phy@0 {
515646 		compatible = "ethernet-phy-ieee802.3-c22";
....@@ -524,13 +655,7 @@
524655 	};
525656 };
526657 
527
-&video_phy0 {
528
-	status = "okay";
529
-};
530658 
531
-&video_phy1 {
532
-	status = "disabled";
533
-};
534659 
535660 &pcie30phy {
536661 	status = "disabled";
....@@ -542,26 +667,39 @@
542667 	status = "okay";
543668 };
544669 
545
-&pcie3x2 {
546
-	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
547
-	vpcie3v3-supply = <&vcc3v3_pcie>;
548
-	status = "okay";
549
-};
550
-
551670 &pinctrl {
552
-
671
+//	cam {
672
+//		camera_pwr: camera-pwr {
673
+//			rockchip,pins =
674
+//				/* camera power en */
675
+//				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
676
+//		};
677
+//	};
553678 	headphone {
554679 		hp_det: hp-det {
555
-			rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
680
+			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>,
681
+							<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
556682 		};
557683 	};
558684 
559685 	wireless-wlan {
560686 		wifi_host_wake_irq: wifi-host-wake-irq {
561
-			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
687
+			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
688
+		};
689
+	};
690
+
691
+	wireless-bluetooth {
692
+		uart1_gpios: uart1-gpios {
693
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
562694 		};
563695 	};
564696 	
697
+	lcd1 {
698
+        lcd1_rst_gpio: lcd1-rst-gpio {
699
+            rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
700
+        };
701
+    };
702
+		
565703 	nk_io_init{
566704 		nk_io_gpio: nk-io-gpio{
567705 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
....@@ -571,7 +709,7 @@
571709 							<4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
572710 							<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
573711 							<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>,
574
-							<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>, 
712
+							<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
575713 							<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
576714 							<1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
577715 							<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
....@@ -579,18 +717,24 @@
579717 							<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
580718 							<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
581719 							<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
720
+							<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
721
+							<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
722
+							<3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
582723 							<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
583
-							<2 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,//93 SPI2_CS0_M1_3V3
584
-							<2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>,//94 SPI2_MOSI_M1_3V3
585
-							<2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>,//95 SPI2_MISO_M1_3V3
586
-							<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,//96 SPI2_CLK_M1_3V3
724
+							<0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B0_u_3V3  DO1
725
+							<0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B3_u_3V3  DO2
726
+							<0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B4_u_3V3  DO3
727
+							<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B5_u_3V3  DO4
728
+							<0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B6_u_3V3  DO5
729
+							
730
+							<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C0_d_3V3 DI1_1
731
+							<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C1_d_3V3 DI2_1
732
+							<0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C2_d_3V3 DI3_1
733
+							<0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C3_d_3V3 DI4_1
734
+							<0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C5_d_3V3 DI5_1
587735 							<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
588736 		};
589737 	};
590
-};
591
-
592
-&rk809_sound {
593
-	hp-det-gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
594738 };
595739 
596740 &rkisp {
....@@ -615,36 +759,30 @@
615759 	};
616760 };
617761 
618
-&route_dsi0 {
619
-	status = "disabled";
620
-	connect = <&vp1_out_dsi0>;
621
-};
622762 
623
-
624
-
625
-&route_edp {
626
-	status = "disabled";
627
-	connect = <&vp1_out_edp>;
628
-};
629763 
630764 &sata2 {
631765 	status = "okay";
632766 };
633767 
634768 &sdmmc2 {
635
-	max-frequency = <150000000>;
636
-	supports-sdio;
637
-	bus-width = <4>;
638
-	disable-wp;
639
-	cap-sd-highspeed;
640
-	cap-sdio-irq;
641
-	keep-power-in-suspend;
642
-	mmc-pwrseq = <&sdio_pwrseq>;
643
-	non-removable;
644
-	pinctrl-names = "default";
645
-	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
646
-	sd-uhs-sdr104;
647
-	status = "okay";
769
+        status = "disabled";
770
+};
771
+
772
+&sdmmc1 {
773
+        max-frequency = <150000000>;
774
+        supports-sdio;
775
+        bus-width = <4>;
776
+        disable-wp;
777
+        cap-sd-highspeed;
778
+        cap-sdio-irq;
779
+        keep-power-in-suspend;
780
+        mmc-pwrseq = <&sdio_pwrseq>;
781
+        non-removable;
782
+        pinctrl-names = "default";
783
+        pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
784
+        sd-uhs-sdr104;
785
+        status = "okay";
648786 };
649787 
650788 &spdif_8ch {
....@@ -659,15 +797,6 @@
659797 	pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
660798 };
661799 
662
-&vcc3v3_lcd0_n {
663
-	gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; 
664
-	enable-active-high;
665
-};
666
-
667
-&vcc3v3_lcd1_n {
668
-	gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; //MIPI_3V3EN_GPIO3_A3_d_3V3
669
-	enable-active-high;
670
-};
671800 
672801 &wireless_wlan {
673802 	pinctrl-names = "default";
....@@ -677,11 +806,21 @@
677806 
678807 &wireless_bluetooth {
679808 	compatible = "bluetooth-platdata";
809
+	clocks = <&rk809 1>;
810
+	clock-names = "ext_clock";
811
+	//wifi-bt-power-toggle;
812
+	uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
813
+	pinctrl-names = "default", "rts_gpio";
814
+	pinctrl-0 = <&uart1m0_rtsn>;
815
+	pinctrl-1 = <&uart1_gpios>;
816
+	BT,reset_gpio    = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
817
+    BT,wake_gpio     = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
818
+    BT,wake_host_irq = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
680819 	status = "disabled";
681820 };
682821 
683822 &uart0 {
684
-	status = "okay";
823
+	status = "disabled";
685824 };
686825 
687826 &uart1 {	
....@@ -696,7 +835,7 @@
696835 };
697836 
698837 &uart4 {
699
-	status = "okay";
838
+	status = "disabled";
700839 	pinctrl-0 = <&uart4m1_xfer>;
701840 };
702841 
....@@ -705,12 +844,18 @@
705844 	pinctrl-0 = <&uart5m1_xfer>;
706845 };
707846 
847
+
708848 &uart7 {
709849 	status = "okay";
710850 	pinctrl-0 = <&uart7m1_xfer>;
711851 };
712852 
853
+&uart8 {
854
+	status = "disabled";
855
+	pinctrl-0 = <&uart8m1_xfer>;
856
+};
857
+
713858 &uart9 {
714
-	status = "okay";
859
+	status = "disabled";
715860 	pinctrl-0 = <&uart9m1_xfer>;
716
-};
861
+};