add ax88772C AX88772C_eeprom_tools

hc

2024-05-10 61598093bbdd283a7edc367d900f223070ead8d2

 kernel/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
..
..
@@ -2,9 +2,9 @@
2
2
 
3
3
 Required properties:
4
4
 - compatible : should be "rockchip,<name>-tsadc"
5
+   "rockchip,px30-tsadc":   found on PX30 SoCs
5
6
    "rockchip,rv1108-tsadc": found on RV1108 SoCs
6
7
    "rockchip,rv1126-tsadc": found on RV1126 SoCs
7
-   "rockchip,px30-tsadc":   found on PX30 SoCs
8
8
    "rockchip,rk1808-tsadc": found on RK1808 SoCs
9
9
    "rockchip,rk3228-tsadc": found on RK3228 SoCs
10
10
    "rockchip,rk3288-tsadc": found on RK3288 SoCs
..
..
@@ -13,6 +13,7 @@
13
13
    "rockchip,rk3368-tsadc": found on RK3368 SoCs
14
14
    "rockchip,rk3399-tsadc": found on RK3399 SoCs
15
15
    "rockchip,rk3568-tsadc": found on RK3568 SoCs
16
+   "rockchip,rk3588-tsadc": found on RK3588 SoCs
16
17
 - reg : physical base address of the controller and length of memory mapped
17
18
 	region.
18
19
 - interrupts : The interrupt number to the cpu. The interrupt specifier format
..
..
@@ -28,7 +29,7 @@
28
29
 	      CRU when tshut.
29
30
 - pinctrl-1 : The "otpout" pinctrl state, it will be set if tsadc via set
30
31
 	      otpout_gpio when tshut.
31
-- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
32
+- #thermal-sensor-cells : Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
32
33
 
33
34
 Optional properties:
34
35
 - rockchip,hw-tshut-temp : The hardware-controlled shutdown temperature value.
..
..
@@ -47,7 +48,7 @@
47
48
 	resets = <&cru SRST_TSADC>;
48
49
 	reset-names = "tsadc-apb";
49
50
 	pinctrl-names = "gpio", "otpout";
50
-	pinctrl-0 = <&otp_gpio>;
51
+	pinctrl-0 = <&otp_pin>;
51
52
 	pinctrl-1 = <&otp_out>;
52
53
 	#thermal-sensor-cells = <1>;
53
54
 	rockchip,hw-tshut-temp = <95000>;