gmac read mac form eeprom

hc

2023-11-07 5e8555e3ea324daaf0e38422bcba48c4df33a0d9

 kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
..
..
@@ -16,14 +16,6 @@
16
16
 	model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
17
17
 	compatible = "rockchip,rk3568-evb1-ddr4-v10", "rockchip,rk3568";
18
18
 
19
-	rk_headset: rk-headset {
20
-		compatible = "rockchip_headset";
21
-		headset_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
22
-		spk_ctl_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;//AMP_SD_GPIO4_C2_3V3
23
-		pinctrl-names = "default";
24
-		pinctrl-0 = <&hp_det>;
25
-	};
26
-
27
19
 	vcc2v5_sys: vcc2v5-ddr {
28
20
 		compatible = "regulator-fixed";
29
21
 		regulator-name = "vcc2v5-sys";
..
..
@@ -34,6 +26,15 @@
34
26
 		vin-supply = <&vcc3v3_sys>;
35
27
 	};
36
28
 
29
+	vcc3v3_vga: vcc3v3-vga {
30
+		compatible = "regulator-fixed";
31
+		regulator-name = "vcc3v3_vga";
32
+		regulator-always-on;
33
+		regulator-boot-on;
34
+		gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
35
+		enable-active-high;
36
+		vin-supply = <&vcc3v3_sys>;
37
+	};
37
38
 
38
39
 	pcie30_avdd0v9: pcie30-avdd0v9 {
39
40
 		compatible = "regulator-fixed";
..
..
@@ -60,9 +61,7 @@
60
61
 		regulator-name = "vcc3v3_pcie";
61
62
 		regulator-min-microvolt = <3300000>;
62
63
 		regulator-max-microvolt = <3300000>;
63
-		regulator-always-on;
64
64
 		enable-active-high;
65
-		regulator-boot-on;
66
65
 		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
67
66
 		startup-delay-us = <5000>;
68
67
 		vin-supply = <&dc_12v>;
..
..
@@ -87,8 +86,9 @@
87
86
 		enable-active-high;
88
87
 		regulator-always-on;
89
88
 		regulator-boot-on;
90
-    	};
89
+	};
91
90
 #endif
91
+
92
92
 	ndj_io_init {
93
93
          	compatible = "nk_io_control";	
94
94
 			pinctrl-names = "default";
..
..
@@ -186,28 +186,9 @@
186
186
 				gpio_function = <1>;
187
187
 			};
188
188
 	#endif
189
-		};
190
-#if 0			
191
-	    nk_io_init {
192
-                compatible = "nk_io_control";
193
-//				vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
194
-                hub_host2_5V_rest_gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
195
-                hub_host3_5v_gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
196
-                vcc_5v_io = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;   //VCC5_IO_EN_GPIO1_A4_3V3
197
-                vcc_12v_io = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
198
-                en_4g_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
199
-                reset_4g_gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; //4G_RST_GPIO01_B2_3V3
200
-                air_mode_4g_gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; //4G_AIR_MODE_GPIO01_B0_3V3
201
-                wake_4g_gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; //4G_WAKEUP_GPIO01_B1_3V3
202
-				hp_en_gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
203
-//              spk_out_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;//AMP_SD_GPIO4_C2_3V3			
204
-				wifi_power_en_gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
205
-//				pcie_power_en_gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;//PCIE_PWREN_H_GPIO0_D4				
206
-				pinctrl-names = "default";
207
-				pinctrl-0 = <&nk_io_gpio>;				
208
-        };
209
-#endif	
210
-		panel: panel {
189
+	};
190
+	
191
+			panel: panel {
211
192
 				compatible = "simple-panel";
212
193
 				backlight = <&backlight>;
213
194
 				power-supply = <&vcc3v3_lcd0_n>;
..
..
@@ -311,10 +292,6 @@
311
292
  * video_phy0 needs to be enabled
312
293
  * when dsi0 is enabled
313
294
  */
314
-&video_phy0 {
315
-	status = "disabled";
316
-};
317
-
318
295
 &dsi0 {
319
296
 	status = "disabled";
320
297
 };
..
..
@@ -335,10 +312,6 @@
335
312
  * video_phy1 needs to be enabled
336
313
  * when dsi1 is enabled
337
314
  */
338
- 
339
-&video_phy1 {
340
-	status = "okay";
341
-}; 
342
315
 &dsi1 {
343
316
 	status = "disabled";
344
317
 };
..
..
@@ -348,29 +321,15 @@
348
321
 };
349
322
 
350
323
 &dsi1_in_vp1 {
351
-	status = "okay";
324
+	status = "disabled";
352
325
 };
353
326
 
354
327
 &dsi1_panel {
355
-	power-supply = <&vcc3v3_lcd1_n>;   //MIPI_3V3EN_GPIO3_A3_d_3V3
356
-    vddio-mipi = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; //MIPI_EN_1V8_GPIO3_A4_d_3V3
357
-    reset-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>; //MIPI_RST_L_GPIO3_C7
358
-    vcc-5v-gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
359
-    pinctrl-names = "default";
360
-    pinctrl-0 = <&lcd1_rst_gpio>;
328
+	power-supply = <&vcc3v3_lcd1_n>;
361
329
 };
362
-
363
-&route_dsi1 {
364
-	status = "disabled";
365
-	connect = <&vp1_out_dsi1>;
366
-};
367
-
368
-
369
-/*
370
-*  edp_start
371
-*/
372
330
 
373
331
 &edp {
332
+	//hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;	
374
333
     force-hpd;
375
334
     status = "okay";
376
335
     ports {
..
..
@@ -380,70 +339,21 @@
380
339
                 remote-endpoint = <&panel_in>;
381
340
             };
382
341
         };
383
-    };
342
+   
343
+	};
384
344
 };
385
345
 
386
346
 &edp_phy {
387
-  status = "okay";
388
-
347
+	status = "okay";
389
348
 };
390
349
 
391
350
 &edp_in_vp0 {
392
-    status = "disabled";
393
-};
394
-
395
-&edp_in_vp1 {
396
-    status = "okay";
397
-
398
-};
399
-
400
-&route_edp {
401
-    status = "okay";
402
-    connect = <&vp1_out_edp>;
403
-};
404
-
405
-&route_edp {
406
-	status = "okay";
407
-};
408
-/*
409
-*  edp_end
410
-*/
411
-
412
-/*
413
-*  Hdmi_start
414
-*/
415
-
416
-&hdmi {
417
-	status = "okay";
418
-	rockchip,phy-table =
419
-		<92812500  0x8009 0x0000 0x0270>,
420
-		<165000000 0x800b 0x0000 0x026d>,
421
-		<185625000 0x800b 0x0000 0x01ed>,
422
-		<297000000 0x800b 0x0000 0x01ad>,
423
-		<594000000 0x8029 0x0000 0x0088>,
424
-		<000000000 0x0000 0x0000 0x0000>;
425
-};
426
-
427
-&route_hdmi {
428
-	status = "okay";
429
-	connect = <&vp0_out_hdmi>;
430
-};
431
-
432
-&hdmi_in_vp0 {
433
-	status = "okay";
434
-};
435
-
436
-&hdmi_in_vp1 {
437
351
 	status = "disabled";
438
352
 };
439
353
 
440
-&hdmi_sound {
354
+&edp_in_vp1 {
441
355
 	status = "okay";
442
356
 };
443
-
444
-/*
445
- *  Hdmi_END
446
-*/
447
357
 
448
358
 &gmac0 {
449
359
 	phy-mode = "rgmii";
..
..
@@ -503,9 +413,7 @@
503
413
  * power-supply should switche to vcc3v3_lcd1_n
504
414
  * when mipi panel is connected to dsi1.
505
415
  */
506
-&gt1x {
507
-	power-supply = <&vcc3v3_lcd0_n>;
508
-};
416
+
509
417
 
510
418
 &i2c3 {
511
419
 	status = "okay";
..
..
@@ -524,7 +432,7 @@
524
432
 };
525
433
 
526
434
 &i2c4 {
527
-	status = "okay";
435
+	status = "disabled";
528
436
 	gc8034: gc8034@37 {
529
437
 		compatible = "galaxycore,gc8034";
530
438
 		status = "okay";
..
..
@@ -570,7 +478,7 @@
570
478
 		};
571
479
 	};
572
480
 	ov5695: ov5695@36 {
573
-		status = "okay";
481
+		status = "disabled";
574
482
 		compatible = "ovti,ov5695";
575
483
 		reg = <0x36>;
576
484
 		clocks = <&cru CLK_CIF_OUT>;
..
..
@@ -593,19 +501,6 @@
593
501
 	};
594
502
 };
595
503
 
596
-&i2c5 {
597
-	status = "okay";
598
-
599
-	hym8563: hym8563@51 {
600
-		compatible = "haoyu,hym8563";
601
-		reg = <0x51>;
602
-		#clock-cells = <0>;
603
-		clock-frequency = <32768>;
604
-		clock-output-names = "xin32k";
605
-		/* rtc_int is not connected */
606
-	};
607
-};
608
-
609
504
 &mdio0 {
610
505
 	rgmii_phy0: phy@0 {
611
506
 		compatible = "ethernet-phy-ieee802.3-c22";
..
..
@@ -620,51 +515,44 @@
620
515
 	};
621
516
 };
622
517
 
518
+&video_phy0 {
519
+	status = "disabled";
520
+};
623
521
 
522
+&video_phy1 {
523
+	status = "disabled";
524
+};
624
525
 
625
526
 &pcie30phy {
626
527
 	status = "okay";
627
528
 };
628
529
 
629
-&pcie2x1 {
630
-	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
530
+&pcie3x2 {
531
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
631
532
 	vpcie3v3-supply = <&vcc3v3_pcie>;
632
533
 	status = "okay";
633
534
 };
634
535
 
635
536
 &pinctrl {
636
-//	cam {
637
-//		camera_pwr: camera-pwr {
638
-//			rockchip,pins =
639
-//				/* camera power en */
640
-//				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
641
-//		};
642
-//	};
537
+
643
538
 	headphone {
644
539
 		hp_det: hp-det {
645
-			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>,
646
-							<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
540
+			rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
647
541
 		};
648
542
 	};
649
543
 
650
544
 	wireless-wlan {
651
545
 		wifi_host_wake_irq: wifi-host-wake-irq {
652
-			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
546
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
653
547
 		};
654
548
 	};
655
549
 
656
550
 	wireless-bluetooth {
657
-		uart1_gpios: uart1-gpios {
658
-			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
551
+		uart8_gpios: uart8-gpios {
552
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
659
553
 		};
660
554
 	};
661
555
 	
662
-	lcd1 {
663
-        lcd1_rst_gpio: lcd1-rst-gpio {
664
-            rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
665
-        };
666
-    };
667
-		
668
556
 	nk_io_init{
669
557
 		nk_io_gpio: nk-io-gpio{
670
558
 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
..
..
@@ -692,6 +580,10 @@
692
580
 	};
693
581
 };
694
582
 
583
+&rk809_sound {
584
+	hp-det-gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
585
+};
586
+
695
587
 &rkisp {
696
588
 	status = "disabled";
697
589
 };
..
..
@@ -714,32 +606,36 @@
714
606
 	};
715
607
 };
716
608
 
609
+&route_dsi0 {
610
+	status = "disabled";
611
+	connect = <&vp1_out_dsi0>;
612
+};
717
613
 
718
614
 
719
615
 
616
+&route_edp {
617
+	status = "okay";
618
+	connect = <&vp1_out_edp>;
619
+};
720
620
 
721
621
 &sata2 {
722
622
 	status = "okay";
723
623
 };
724
624
 
725
625
 &sdmmc2 {
726
-        status = "disabled";
727
-};
728
-
729
-&sdmmc1 {
730
-        max-frequency = <150000000>;
731
-        supports-sdio;
732
-        bus-width = <4>;
733
-        disable-wp;
734
-        cap-sd-highspeed;
735
-        cap-sdio-irq;
736
-        keep-power-in-suspend;
737
-        mmc-pwrseq = <&sdio_pwrseq>;
738
-        non-removable;
739
-        pinctrl-names = "default";
740
-        pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
741
-        sd-uhs-sdr104;
742
-        status = "okay";
626
+	max-frequency = <150000000>;
627
+	supports-sdio;
628
+	bus-width = <4>;
629
+	disable-wp;
630
+	cap-sd-highspeed;
631
+	cap-sdio-irq;
632
+	keep-power-in-suspend;
633
+	mmc-pwrseq = <&sdio_pwrseq>;
634
+	non-removable;
635
+	pinctrl-names = "default";
636
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
637
+	sd-uhs-sdr104;
638
+	status = "okay";
743
639
 };
744
640
 
745
641
 &spdif_8ch {
..
..
@@ -767,7 +663,7 @@
767
663
 &wireless_wlan {
768
664
 	pinctrl-names = "default";
769
665
 	pinctrl-0 = <&wifi_host_wake_irq>;
770
-	WIFI,host_wake_irq = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
666
+	WIFI,host_wake_irq = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
771
667
 };
772
668
 
773
669
 &wireless_bluetooth {
..
..
@@ -775,13 +671,13 @@
775
671
 	clocks = <&rk809 1>;
776
672
 	clock-names = "ext_clock";
777
673
 	//wifi-bt-power-toggle;
778
-	uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
674
+	uart_rts_gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
779
675
 	pinctrl-names = "default", "rts_gpio";
780
-	pinctrl-0 = <&uart1m0_rtsn>;
781
-	pinctrl-1 = <&uart1_gpios>;
782
-	BT,reset_gpio    = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
783
-    BT,wake_gpio     = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
784
-    BT,wake_host_irq = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
676
+	pinctrl-0 = <&uart8m0_rtsn>;
677
+	pinctrl-1 = <&uart8_gpios>;
678
+	BT,reset_gpio    = <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;
679
+	BT,wake_gpio     = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
680
+	BT,wake_host_irq = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
785
681
 	status = "okay";
786
682
 };
787
683
 
..
..
@@ -818,4 +714,4 @@
818
714
 &uart9 {
819
715
 	status = "okay";
820
716
 	pinctrl-0 = <&uart9m1_xfer>;
821
-};
717
+};