gmac get mac form eeprom

hc

2024-05-10 37f49e37ab4cb5d0bc4c60eb5c6d4dd57db767bb

 kernel/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
..
..
@@ -1,8 +1,4 @@
1
-/*
2
- * This program is free software; you can redistribute it and/or modify
3
- * it under the terms of the GNU General Public License version 2 as
4
- * published by the Free Software Foundation.
5
- */
1
+// SPDX-License-Identifier: GPL-2.0-only
6
2
 
7
3
 / {
8
4
 	gpio_keys {
..
..
@@ -63,12 +59,13 @@
63
59
 		};
64
60
 	};
65
61
 
66
-	pwm10: dmtimer-pwm {
62
+	pwm10: pwm-10 {
67
63
 		compatible = "ti,omap-dmtimer-pwm";
68
64
 		pinctrl-names = "default";
69
65
 		pinctrl-0 = <&pwm_pins>;
70
66
 		ti,timers = <&timer10>;
71
67
 		#pwm-cells = <3>;
68
+		ti,clock-source = <0x01>;
72
69
 	};
73
70
 
74
71
 };
..
..
@@ -107,14 +104,20 @@
107
104
 	};
108
105
 };
109
106
 
107
+&hdqw1w {
108
+	pinctrl-names = "default";
109
+	pinctrl-0 = <&hdq_pins>;
110
+};
111
+
112
+
110
113
 &vpll2 {
111
114
 	regulator-always-on;
112
115
 };
113
116
 
114
117
 &dss {
115
-	status = "ok";
118
+	status = "okay";
116
119
 	vdds_dsi-supply = <&vpll2>;
117
-	vdda_video-supply = <&video_reg>;
120
+	vdda_video-supply = <&vpll2>;
118
121
 	pinctrl-names = "default";
119
122
 	pinctrl-0 = <&dss_dpi_pins1>;
120
123
 	port {
..
..
@@ -130,43 +133,18 @@
130
133
 		display0 = &lcd0;
131
134
 	};
132
135
 
133
-	video_reg: video_reg {
136
+	lcd0: display {
137
+		/* This isn't the exact LCD, but the timings meet spec */
138
+		compatible = "newhaven,nhd-4.3-480272ef-atxl";
139
+		label = "15";
134
140
 		pinctrl-names = "default";
135
141
 		pinctrl-0 = <&panel_pwr_pins>;
136
-		compatible = "regulator-fixed";
137
-		regulator-name = "fixed-supply";
138
-		regulator-min-microvolt = <3300000>;
139
-		regulator-max-microvolt = <3300000>;
140
-		gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd INI */
141
-	};
142
-
143
-	lcd0: display {
144
-		compatible = "panel-dpi";
145
-		label = "15";
146
-		status = "okay";
147
-		/* default-on; */
148
-		pinctrl-names = "default";
149
-
142
+		backlight = <&bl>;
143
+		enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
150
144
 		port {
151
145
 			lcd_in: endpoint {
152
146
 				remote-endpoint = <&dpi_out>;
153
147
 			};
154
-		};
155
-
156
-		panel-timing {
157
-			clock-frequency = <9000000>;
158
-			hactive = <480>;
159
-			vactive = <272>;
160
-			hfront-porch = <3>;
161
-			hback-porch = <2>;
162
-			hsync-len = <42>;
163
-			vback-porch = <3>;
164
-			vfront-porch = <4>;
165
-			vsync-len = <11>;
166
-			hsync-active = <0>;
167
-			vsync-active = <0>;
168
-			de-active = <1>;
169
-			pixelclk-active = <1>;
170
148
 		};
171
149
 	};
172
150
 
..
..
@@ -199,6 +177,12 @@
199
177
 		>;
200
178
 	};
201
179
 
180
+	hdq_pins: hdq_pins {
181
+		pinctrl-single,pins = <
182
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* hdq_sio */
183
+		>;
184
+	};
185
+
202
186
 	pwm_pins: pinmux_pwm_pins {
203
187
 		pinctrl-single,pins = <
204
188
 			OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3)       /* gpmc_ncs5.gpt_10_pwm_evt */