rk3568 rkbin init

hc

2023-11-06 36f0949ef9854b82a9a3154d970da4e3b8d12a61

 kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
old mode 100755new mode 100644
..
..
@@ -8,21 +8,12 @@
8
8
 
9
9
 #include <dt-bindings/gpio/gpio.h>
10
10
 #include <dt-bindings/pinctrl/rockchip.h>
11
-#include <dt-bindings/display/media-bus-format.h>
12
11
 #include "rk3568.dtsi"
13
12
 #include "rk3568-evb.dtsi"
14
13
 
15
14
 / {
16
15
 	model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
17
16
 	compatible = "rockchip,rk3568-evb1-ddr4-v10", "rockchip,rk3568";
18
-
19
-	rk_headset: rk-headset {
20
-		compatible = "rockchip_headset";
21
-		headset_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
22
-		spk_ctl_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;//AMP_SD_GPIO4_C2_3V3
23
-		pinctrl-names = "default";
24
-		pinctrl-0 = <&hp_det>;
25
-	};
26
17
 
27
18
 	vcc2v5_sys: vcc2v5-ddr {
28
19
 		compatible = "regulator-fixed";
..
..
@@ -34,6 +25,15 @@
34
25
 		vin-supply = <&vcc3v3_sys>;
35
26
 	};
36
27
 
28
+	vcc3v3_vga: vcc3v3-vga {
29
+		compatible = "regulator-fixed";
30
+		regulator-name = "vcc3v3_vga";
31
+		regulator-always-on;
32
+		regulator-boot-on;
33
+		gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
34
+		enable-active-high;
35
+		vin-supply = <&vcc3v3_sys>;
36
+	};
37
37
 
38
38
 	pcie30_avdd0v9: pcie30-avdd0v9 {
39
39
 		compatible = "regulator-fixed";
..
..
@@ -60,9 +60,7 @@
60
60
 		regulator-name = "vcc3v3_pcie";
61
61
 		regulator-min-microvolt = <3300000>;
62
62
 		regulator-max-microvolt = <3300000>;
63
-		regulator-always-on;
64
63
 		enable-active-high;
65
-		regulator-boot-on;
66
64
 		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
67
65
 		startup-delay-us = <5000>;
68
66
 		vin-supply = <&dc_12v>;
..
..
@@ -87,8 +85,9 @@
87
85
 		enable-active-high;
88
86
 		regulator-always-on;
89
87
 		regulator-boot-on;
90
-    	};
88
+	};
91
89
 #endif
90
+
92
91
 	ndj_io_init {
93
92
          	compatible = "nk_io_control";	
94
93
 			pinctrl-names = "default";
..
..
@@ -186,69 +185,7 @@
186
185
 				gpio_function = <1>;
187
186
 			};
188
187
 	#endif
189
-		};
190
-#if 0			
191
-	    nk_io_init {
192
-                compatible = "nk_io_control";
193
-//				vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
194
-                hub_host2_5V_rest_gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
195
-                hub_host3_5v_gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
196
-                vcc_5v_io = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;   //VCC5_IO_EN_GPIO1_A4_3V3
197
-                vcc_12v_io = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
198
-                en_4g_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
199
-                reset_4g_gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; //4G_RST_GPIO01_B2_3V3
200
-                air_mode_4g_gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; //4G_AIR_MODE_GPIO01_B0_3V3
201
-                wake_4g_gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; //4G_WAKEUP_GPIO01_B1_3V3
202
-				hp_en_gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
203
-//              spk_out_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;//AMP_SD_GPIO4_C2_3V3			
204
-				wifi_power_en_gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
205
-//				pcie_power_en_gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;//PCIE_PWREN_H_GPIO0_D4				
206
-				pinctrl-names = "default";
207
-				pinctrl-0 = <&nk_io_gpio>;				
208
-        };
209
-#endif	
210
-		panel: panel {
211
-				compatible = "simple-panel";
212
-				backlight = <&backlight>;
213
-				power-supply = <&vcc3v3_lcd0_n>;
214
-				enable-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; //LCD0_VDD_H_GPIO2_D4
215
-				reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>; //7511_RST_GPIO3_D1
216
-				edp-bl-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;  //LCD0_BKLT_EN_3V3
217
-				edp-bl-en = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
218
-				bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
219
-				bpc = <8>;
220
-				prepare-delay-ms = <200>;
221
-				enable-delay-ms = <20>;
222
-				lvds-gpio0 = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; //7511_GPIO0-GPIO3_D2 
223
-				lvds-gpio1 = <&gpio3 RK_PD3 GPIO_ACTIVE_HIGH>; //7511_GPIO1-GPIO3_D3 
224
-				lvds-gpio2 = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; //7511_GPIO2-GPIO3_D4 
225
-				lvds-gpio3 = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; //7511_GPIO3-GPIO3_D5
226
-				nodka-lvds = <15>;
227
-
228
-				display-timings {
229
-                native-mode = <&timing0>;
230
-                timing0: timing0 {
231
-					clock-frequency = <72500000>;
232
-					hactive = <1280>;
233
-					vactive = <800>;
234
-					hfront-porch = <70>;
235
-					hsync-len = <2>;
236
-					hback-porch = <88>;
237
-					vfront-porch = <7>;
238
-					vsync-len = <4>;
239
-					vback-porch = <17>;
240
-					hsync-active = <21>;
241
-					vsync-active = <0>;
242
-					de-active = <0>;
243
-					pixelclk-active = <0>;			
244
-					};
245
-				};
246
-				ports {
247
-					panel_in: endpoint {
248
-					remote-endpoint = <&edp_out>;
249
-						};
250
-					};   
251
-				};
188
+};
252
189
 };
253
190
 
254
191
 &combphy0_us {
..
..
@@ -311,10 +248,6 @@
311
248
  * video_phy0 needs to be enabled
312
249
  * when dsi0 is enabled
313
250
  */
314
-&video_phy0 {
315
-	status = "disabled";
316
-};
317
-
318
251
 &dsi0 {
319
252
 	status = "disabled";
320
253
 };
..
..
@@ -335,10 +268,6 @@
335
268
  * video_phy1 needs to be enabled
336
269
  * when dsi1 is enabled
337
270
  */
338
- 
339
-&video_phy1 {
340
-	status = "okay";
341
-}; 
342
271
 &dsi1 {
343
272
 	status = "disabled";
344
273
 };
..
..
@@ -348,102 +277,29 @@
348
277
 };
349
278
 
350
279
 &dsi1_in_vp1 {
351
-	status = "okay";
280
+	status = "disabled";
352
281
 };
353
282
 
354
283
 &dsi1_panel {
355
-	power-supply = <&vcc3v3_lcd1_n>;   //MIPI_3V3EN_GPIO3_A3_d_3V3
356
-    vddio-mipi = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; //MIPI_EN_1V8_GPIO3_A4_d_3V3
357
-    reset-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>; //MIPI_RST_L_GPIO3_C7
358
-    vcc-5v-gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
359
-    pinctrl-names = "default";
360
-    pinctrl-0 = <&lcd1_rst_gpio>;
284
+	power-supply = <&vcc3v3_lcd1_n>;
361
285
 };
362
-
363
-&route_dsi1 {
364
-	status = "disabled";
365
-	connect = <&vp1_out_dsi1>;
366
-};
367
-
368
-
369
-/*
370
-*  edp_start
371
-*/
372
286
 
373
287
 &edp {
374
-    force-hpd;
375
-    status = "okay";
376
-    ports {
377
-        port@1 {
378
-            reg = <1>;
379
-            edp_out: endpoint {
380
-                remote-endpoint = <&panel_in>;
381
-            };
382
-        };
383
-    };
288
+	hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
289
+	status = "okay";
384
290
 };
385
291
 
386
292
 &edp_phy {
387
-  status = "okay";
388
-
293
+	status = "okay";
389
294
 };
390
295
 
391
296
 &edp_in_vp0 {
392
-    status = "disabled";
297
+	status = "okay";
393
298
 };
394
299
 
395
300
 &edp_in_vp1 {
396
-    status = "okay";
397
-
398
-};
399
-
400
-&route_edp {
401
-    status = "okay";
402
-    connect = <&vp1_out_edp>;
403
-};
404
-
405
-&route_edp {
406
-	status = "okay";
407
-};
408
-/*
409
-*  edp_end
410
-*/
411
-
412
-/*
413
-*  Hdmi_start
414
-*/
415
-
416
-&hdmi {
417
-	status = "okay";
418
-	rockchip,phy-table =
419
-		<92812500  0x8009 0x0000 0x0270>,
420
-		<165000000 0x800b 0x0000 0x026d>,
421
-		<185625000 0x800b 0x0000 0x01ed>,
422
-		<297000000 0x800b 0x0000 0x01ad>,
423
-		<594000000 0x8029 0x0000 0x0088>,
424
-		<000000000 0x0000 0x0000 0x0000>;
425
-};
426
-
427
-&route_hdmi {
428
-	status = "okay";
429
-	connect = <&vp0_out_hdmi>;
430
-};
431
-
432
-&hdmi_in_vp0 {
433
-	status = "okay";
434
-};
435
-
436
-&hdmi_in_vp1 {
437
301
 	status = "disabled";
438
302
 };
439
-
440
-&hdmi_sound {
441
-	status = "okay";
442
-};
443
-
444
-/*
445
- *  Hdmi_END
446
-*/
447
303
 
448
304
 &gmac0 {
449
305
 	phy-mode = "rgmii";
..
..
@@ -507,24 +363,8 @@
507
363
 	power-supply = <&vcc3v3_lcd0_n>;
508
364
 };
509
365
 
510
-&i2c3 {
511
-	status = "okay";
512
-       //mac eeprom
513
-        eeprom@51 {
514
-                //compatible = "atmel,24c02";
515
-                compatible = "atmel,24c256";
516
-                reg = <0x51>;
517
-        };
518
-	
519
-	  //nk-mcu
520
-        nkmcu@15 {
521
-                compatible = "nk_mcu";
522
-                reg = <0x15>;
523
-        };
524
-};
525
-
526
366
 &i2c4 {
527
-	status = "okay";
367
+	status = "disabled";
528
368
 	gc8034: gc8034@37 {
529
369
 		compatible = "galaxycore,gc8034";
530
370
 		status = "okay";
..
..
@@ -570,7 +410,7 @@
570
410
 		};
571
411
 	};
572
412
 	ov5695: ov5695@36 {
573
-		status = "okay";
413
+		status = "disabled";
574
414
 		compatible = "ovti,ov5695";
575
415
 		reg = <0x36>;
576
416
 		clocks = <&cru CLK_CIF_OUT>;
..
..
@@ -593,19 +433,6 @@
593
433
 	};
594
434
 };
595
435
 
596
-&i2c5 {
597
-	status = "okay";
598
-
599
-	hym8563: hym8563@51 {
600
-		compatible = "haoyu,hym8563";
601
-		reg = <0x51>;
602
-		#clock-cells = <0>;
603
-		clock-frequency = <32768>;
604
-		clock-output-names = "xin32k";
605
-		/* rtc_int is not connected */
606
-	};
607
-};
608
-
609
436
 &mdio0 {
610
437
 	rgmii_phy0: phy@0 {
611
438
 		compatible = "ethernet-phy-ieee802.3-c22";
..
..
@@ -620,51 +447,50 @@
620
447
 	};
621
448
 };
622
449
 
450
+&video_phy0 {
451
+	status = "disabled";
452
+};
623
453
 
454
+&video_phy1 {
455
+	status = "disabled";
456
+};
624
457
 
625
458
 &pcie30phy {
626
459
 	status = "okay";
627
460
 };
628
461
 
629
-&pcie2x1 {
630
-	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
462
+&pcie3x2 {
463
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
631
464
 	vpcie3v3-supply = <&vcc3v3_pcie>;
632
465
 	status = "okay";
633
466
 };
634
467
 
635
468
 &pinctrl {
636
-//	cam {
637
-//		camera_pwr: camera-pwr {
638
-//			rockchip,pins =
639
-//				/* camera power en */
640
-//				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
641
-//		};
642
-//	};
469
+	cam {
470
+		camera_pwr: camera-pwr {
471
+			rockchip,pins =
472
+				/* camera power en */
473
+				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
474
+		};
475
+	};
643
476
 	headphone {
644
477
 		hp_det: hp-det {
645
-			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>,
646
-							<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
478
+			rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
647
479
 		};
648
480
 	};
649
481
 
650
482
 	wireless-wlan {
651
483
 		wifi_host_wake_irq: wifi-host-wake-irq {
652
-			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
484
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
653
485
 		};
654
486
 	};
655
487
 
656
488
 	wireless-bluetooth {
657
-		uart1_gpios: uart1-gpios {
658
-			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
489
+		uart8_gpios: uart8-gpios {
490
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
659
491
 		};
660
492
 	};
661
493
 	
662
-	lcd1 {
663
-        lcd1_rst_gpio: lcd1-rst-gpio {
664
-            rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
665
-        };
666
-    };
667
-		
668
494
 	nk_io_init{
669
495
 		nk_io_gpio: nk-io-gpio{
670
496
 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
..
..
@@ -692,6 +518,10 @@
692
518
 	};
693
519
 };
694
520
 
521
+&rk809_sound {
522
+	hp-det-gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
523
+};
524
+
695
525
 &rkisp {
696
526
 	status = "disabled";
697
527
 };
..
..
@@ -701,7 +531,7 @@
701
531
 };
702
532
 
703
533
 &rkisp_vir0 {
704
-	status = "disabled";
534
+	status = "okay";
705
535
 
706
536
 	port {
707
537
 		#address-cells = <1>;
..
..
@@ -714,32 +544,34 @@
714
544
 	};
715
545
 };
716
546
 
547
+&route_dsi0 {
548
+	status = "disabled";
549
+	connect = <&vp1_out_dsi0>;
550
+};
717
551
 
718
-
719
-
552
+&route_edp {
553
+	status = "okay";
554
+	connect = <&vp0_out_edp>;
555
+};
720
556
 
721
557
 &sata2 {
722
558
 	status = "okay";
723
559
 };
724
560
 
725
561
 &sdmmc2 {
726
-        status = "disabled";
727
-};
728
-
729
-&sdmmc1 {
730
-        max-frequency = <150000000>;
731
-        supports-sdio;
732
-        bus-width = <4>;
733
-        disable-wp;
734
-        cap-sd-highspeed;
735
-        cap-sdio-irq;
736
-        keep-power-in-suspend;
737
-        mmc-pwrseq = <&sdio_pwrseq>;
738
-        non-removable;
739
-        pinctrl-names = "default";
740
-        pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
741
-        sd-uhs-sdr104;
742
-        status = "okay";
562
+	max-frequency = <150000000>;
563
+	supports-sdio;
564
+	bus-width = <4>;
565
+	disable-wp;
566
+	cap-sd-highspeed;
567
+	cap-sdio-irq;
568
+	keep-power-in-suspend;
569
+	mmc-pwrseq = <&sdio_pwrseq>;
570
+	non-removable;
571
+	pinctrl-names = "default";
572
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
573
+	sd-uhs-sdr104;
574
+	status = "okay";
743
575
 };
744
576
 
745
577
 &spdif_8ch {
..
..
@@ -749,25 +581,25 @@
749
581
 };
750
582
 
751
583
 &uart8 {
752
-	status = "disabled";
584
+	status = "okay";
753
585
 	pinctrl-names = "default";
754
586
 	pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
755
587
 };
756
588
 
757
589
 &vcc3v3_lcd0_n {
758
-	gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; 
590
+	gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
759
591
 	enable-active-high;
760
592
 };
761
593
 
762
594
 &vcc3v3_lcd1_n {
763
-	gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; //MIPI_3V3EN_GPIO3_A3_d_3V3
595
+	gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
764
596
 	enable-active-high;
765
597
 };
766
598
 
767
599
 &wireless_wlan {
768
600
 	pinctrl-names = "default";
769
601
 	pinctrl-0 = <&wifi_host_wake_irq>;
770
-	WIFI,host_wake_irq = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
602
+	WIFI,host_wake_irq = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
771
603
 };
772
604
 
773
605
 &wireless_bluetooth {
..
..
@@ -775,47 +607,12 @@
775
607
 	clocks = <&rk809 1>;
776
608
 	clock-names = "ext_clock";
777
609
 	//wifi-bt-power-toggle;
778
-	uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
610
+	uart_rts_gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
779
611
 	pinctrl-names = "default", "rts_gpio";
780
-	pinctrl-0 = <&uart1m0_rtsn>;
781
-	pinctrl-1 = <&uart1_gpios>;
782
-	BT,reset_gpio    = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
783
-    BT,wake_gpio     = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
784
-    BT,wake_host_irq = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
612
+	pinctrl-0 = <&uart8m0_rtsn>;
613
+	pinctrl-1 = <&uart8_gpios>;
614
+	BT,reset_gpio    = <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;
615
+	BT,wake_gpio     = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
616
+	BT,wake_host_irq = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
785
617
 	status = "okay";
786
-};
787
-
788
-&uart0 {
789
-	status = "okay";
790
-};
791
-
792
-&uart1 {	
793
-	pinctrl-names = "default";	
794
-	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;	
795
-	status = "okay";		
796
-};
797
-
798
-&uart3 {
799
-	status = "okay";
800
-	pinctrl-0 = <&uart3m1_xfer>;
801
-};
802
-
803
-&uart4 {
804
-	status = "okay";
805
-	pinctrl-0 = <&uart4m1_xfer>;
806
-};
807
-
808
-&uart5 {
809
-	status = "okay";
810
-	pinctrl-0 = <&uart5m1_xfer>;
811
-};
812
-
813
-&uart7 {
814
-	status = "okay";
815
-	pinctrl-0 = <&uart7m1_xfer>;
816
-};
817
-
818
-&uart9 {
819
-	status = "okay";
820
-	pinctrl-0 = <&uart9m1_xfer>;
821
618
 };