forked from ~ljy/RK356X_SDK_RELEASE
blame | history | patch | commit | commitdiff
hc
2023-11-06 36f0949ef9854b82a9a3154d970da4e3b8d12a61 
 kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
old mode 100755new mode 100644
....@@ -8,20 +8,12 @@
88 
99 #include <dt-bindings/gpio/gpio.h>
1010 #include <dt-bindings/pinctrl/rockchip.h>
11
-#include <dt-bindings/display/media-bus-format.h>
1211 #include "rk3568.dtsi"
1312 #include "rk3568-evb.dtsi"
1413 
1514 / {
1615 	model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
1716 	compatible = "rockchip,rk3568-evb1-ddr4-v10", "rockchip,rk3568";
18
-
19
-	rk_headset: rk-headset {
20
-		compatible = "rockchip_headset";
21
-		headset_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
22
-		pinctrl-names = "default";
23
-		pinctrl-0 = <&hp_det>;
24
-	};
2517 
2618 	vcc2v5_sys: vcc2v5-ddr {
2719 		compatible = "regulator-fixed";
....@@ -33,6 +25,15 @@
3325 		vin-supply = <&vcc3v3_sys>;
3426 	};
3527 
28
+	vcc3v3_vga: vcc3v3-vga {
29
+		compatible = "regulator-fixed";
30
+		regulator-name = "vcc3v3_vga";
31
+		regulator-always-on;
32
+		regulator-boot-on;
33
+		gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
34
+		enable-active-high;
35
+		vin-supply = <&vcc3v3_sys>;
36
+	};
3637 
3738 	pcie30_avdd0v9: pcie30-avdd0v9 {
3839 		compatible = "regulator-fixed";
....@@ -59,9 +60,7 @@
5960 		regulator-name = "vcc3v3_pcie";
6061 		regulator-min-microvolt = <3300000>;
6162 		regulator-max-microvolt = <3300000>;
62
-		regulator-always-on;
6363 		enable-active-high;
64
-		regulator-boot-on;
6564 		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
6665 		startup-delay-us = <5000>;
6766 		vin-supply = <&dc_12v>;
....@@ -86,70 +85,107 @@
8685 		enable-active-high;
8786 		regulator-always-on;
8887 		regulator-boot-on;
89
-    	};
88
+	};
9089 #endif
9190 
92
-	    nk_io_init {
93
-                compatible = "nk_io_control";
94
-				vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
95
-                hub_host2_5V_rest_gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
96
-                hub_host3_5v_gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
97
-                vcc_5v_io = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;   //VCC5_IO_EN_GPIO1_A4_3V3
98
-                vcc_12v_io = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
99
-                en_4g_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
100
-                reset_4g_gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; //4G_RST_GPIO01_B2_3V3
101
-                air_mode_4g_gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; //4G_AIR_MODE_GPIO01_B0_3V3
102
-                wake_4g_gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; //4G_WAKEUP_GPIO01_B1_3V3
103
-				hp_en_gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
104
-                spk_out_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;//AMP_SD_GPIO4_C2_3V3			
105
-				wifi_power_en_gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
106
-//				pcie_power_en_gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;//PCIE_PWREN_H_GPIO0_D4				
107
-				pinctrl-names = "default";
108
-				pinctrl-0 = <&nk_io_gpio>;				
109
-        };
110
-		
111
-		panel: panel {
112
-				compatible = "simple-panel";
113
-				backlight = <&backlight>;
114
-				power-supply = <&vcc3v3_lcd0_n>;
115
-				enable-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; //LCD0_VDD_H_GPIO2_D4
116
-				reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>; //7511_RST_GPIO3_D1
117
-				edp-bl-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;  //LCD0_BKLT_EN_3V3
118
-				edp-bl-en = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
119
-				bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
120
-				bpc = <8>;
121
-				prepare-delay-ms = <200>;
122
-				enable-delay-ms = <20>;
123
-				lvds-gpio0 = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; //7511_GPIO0-GPIO3_D2 
124
-				lvds-gpio1 = <&gpio3 RK_PD3 GPIO_ACTIVE_HIGH>; //7511_GPIO1-GPIO3_D3 
125
-				lvds-gpio2 = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; //7511_GPIO2-GPIO3_D4 
126
-				lvds-gpio3 = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; //7511_GPIO3-GPIO3_D5
127
-				nodka-lvds = <15>;
128
-
129
-				display-timings {
130
-                native-mode = <&timing0>;
131
-                timing0: timing0 {
132
-					clock-frequency = <72500000>;
133
-					hactive = <1280>;
134
-					vactive = <800>;
135
-					hfront-porch = <70>;
136
-					hsync-len = <2>;
137
-					hback-porch = <88>;
138
-					vfront-porch = <7>;
139
-					vsync-len = <4>;
140
-					vback-porch = <17>;
141
-					hsync-active = <21>;
142
-					vsync-active = <0>;
143
-					de-active = <0>;
144
-					pixelclk-active = <0>;			
145
-					};
146
-				};
147
-				ports {
148
-					panel_in: endpoint {
149
-					remote-endpoint = <&edp_out>;
150
-						};
151
-					};   
152
-				};
91
+	ndj_io_init {
92
+         	compatible = "nk_io_control";	
93
+			pinctrl-names = "default";
94
+        	pinctrl-0 = <&nk_io_gpio>;
95
+			
96
+			//gpio_op0 = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
97
+			
98
+			vcc_5v {
99
+				gpio_num = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
100
+				gpio_function = <0>;	
101
+			};
102
+			
103
+			vcc_12v {
104
+				gpio_num = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;  //VCC12_IO_EN_GPIO0_C7_3V3
105
+				gpio_function = <0>;
106
+			};
107
+			
108
+			hub_host2_rst {
109
+				gpio_num = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;  //HUB_RST_GPIO4_D2_3V3
110
+				gpio_function = <3>;
111
+			};
112
+			
113
+			hub_host3 {
114
+				gpio_num = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
115
+				gpio_function = <0>;
116
+			};
117
+			
118
+			wake_4g {
119
+				gpio_num = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; //4G_WAKEUP_GPIO01_B1_3V3
120
+				gpio_function = <0>;
121
+			};
122
+			
123
+			air_mode_4g {
124
+				gpio_num = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; //4G_AIR_MODE_GPIO01_B0_3V3
125
+				gpio_function = <0>;
126
+			};
127
+			
128
+			reset_4g {
129
+				gpio_num = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>; //4G_RST_GPIO01_B2_3V3
130
+				gpio_function = <3>;
131
+			};
132
+			
133
+			en_4g {
134
+				gpio_num = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
135
+				gpio_function = <0>;
136
+			};
137
+			
138
+			hp_en {
139
+				gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
140
+				gpio_function = <0>;
141
+			};
142
+			
143
+			wifi_power_en {
144
+				gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
145
+				gpio_function = <0>;
146
+			};
147
+	#if 0		
148
+			do1 {
149
+				gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>; 
150
+				gpio_function = <0>;
151
+			};
152
+			
153
+			do2 {
154
+				gpio_num = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
155
+				gpio_function = <0>;
156
+			};
157
+			
158
+			do3 {
159
+				gpio_num = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
160
+				gpio_function = <0>;
161
+			};
162
+			
163
+			do4 {
164
+				gpio_num = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
165
+				gpio_function = <0>;
166
+			};
167
+			
168
+			do5 {
169
+				gpio_num = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>; 
170
+				gpio_function = <0>;
171
+			};
172
+			
173
+			do6 {
174
+				gpio_num = <&gpio2 RK_PD7 GPIO_ACTIVE_LOW>; 
175
+				gpio_function = <0>;
176
+			};
177
+			
178
+			do7 {
179
+				gpio_num = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>; 
180
+				gpio_function = <0>;
181
+			};
182
+			
183
+			di1 {
184
+				gpio_num = <&gpio2 RK_PD5 GPIO_ACTIVE_HIGH>;
185
+				gpio_function = <1>;
186
+			};
187
+	#endif
188
+};
153189 };
154190 
155191 &combphy0_us {
....@@ -212,10 +248,6 @@
212248  * video_phy0 needs to be enabled
213249  * when dsi0 is enabled
214250  */
215
-&video_phy0 {
216
-	status = "disabled";
217
-};
218
-
219251 &dsi0 {
220252 	status = "disabled";
221253 };
....@@ -236,10 +268,6 @@
236268  * video_phy1 needs to be enabled
237269  * when dsi1 is enabled
238270  */
239
- 
240
-&video_phy1 {
241
-	status = "disabled";
242
-}; 
243271 &dsi1 {
244272 	status = "disabled";
245273 };
....@@ -256,82 +284,22 @@
256284 	power-supply = <&vcc3v3_lcd1_n>;
257285 };
258286 
259
-/*
260
-*  edp_start
261
-*/
262
-
263287 &edp {
264
-    force-hpd;
265
-    status = "okay";
266
-    ports {
267
-        port@1 {
268
-            reg = <1>;
269
-            edp_out: endpoint {
270
-                remote-endpoint = <&panel_in>;
271
-            };
272
-        };
273
-    };
288
+	hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
289
+	status = "okay";
274290 };
275291 
276292 &edp_phy {
277
-    status = "okay";
293
+	status = "okay";
278294 };
279295 
280296 &edp_in_vp0 {
281
-    status = "disabled";
297
+	status = "okay";
282298 };
283299 
284300 &edp_in_vp1 {
285
-    status = "okay";
286
-};
287
-
288
-&route_edp {
289
-    status = "okay";
290
-    connect = <&vp1_out_edp>;
291
-};
292
-
293
-&route_edp {
294
-	status = "okay";
295
-};
296
-/*
297
-*  edp_end
298
-*/
299
-
300
-/*
301
-*  Hdmi_start
302
-*/
303
-
304
-&hdmi {
305
-	status = "okay";
306
-	rockchip,phy-table =
307
-		<92812500  0x8009 0x0000 0x0270>,
308
-		<165000000 0x800b 0x0000 0x026d>,
309
-		<185625000 0x800b 0x0000 0x01ed>,
310
-		<297000000 0x800b 0x0000 0x01ad>,
311
-		<594000000 0x8029 0x0000 0x0088>,
312
-		<000000000 0x0000 0x0000 0x0000>;
313
-};
314
-
315
-&route_hdmi {
316
-	status = "okay";
317
-	connect = <&vp0_out_hdmi>;
318
-};
319
-
320
-&hdmi_in_vp0 {
321
-	status = "okay";
322
-};
323
-
324
-&hdmi_in_vp1 {
325301 	status = "disabled";
326302 };
327
-
328
-&hdmi_sound {
329
-	status = "okay";
330
-};
331
-
332
-/*
333
- *  Hdmi_END
334
-*/
335303 
336304 &gmac0 {
337305 	phy-mode = "rgmii";
....@@ -395,24 +363,8 @@
395363 	power-supply = <&vcc3v3_lcd0_n>;
396364 };
397365 
398
-&i2c3 {
399
-	status = "okay";
400
-       //mac eeprom
401
-        eeprom@51 {
402
-                //compatible = "atmel,24c02";
403
-                compatible = "atmel,24c256";
404
-                reg = <0x51>;
405
-        };
406
-	
407
-	  //nk-mcu
408
-        nkmcu@15 {
409
-                compatible = "nk_mcu";
410
-                reg = <0x15>;
411
-        };
412
-};
413
-
414366 &i2c4 {
415
-	status = "okay";
367
+	status = "disabled";
416368 	gc8034: gc8034@37 {
417369 		compatible = "galaxycore,gc8034";
418370 		status = "okay";
....@@ -458,7 +410,7 @@
458410 		};
459411 	};
460412 	ov5695: ov5695@36 {
461
-		status = "okay";
413
+		status = "disabled";
462414 		compatible = "ovti,ov5695";
463415 		reg = <0x36>;
464416 		clocks = <&cru CLK_CIF_OUT>;
....@@ -481,19 +433,6 @@
481433 	};
482434 };
483435 
484
-&i2c5 {
485
-	status = "okay";
486
-
487
-	hym8563: hym8563@51 {
488
-		compatible = "haoyu,hym8563";
489
-		reg = <0x51>;
490
-		#clock-cells = <0>;
491
-		clock-frequency = <32768>;
492
-		clock-output-names = "xin32k";
493
-		/* rtc_int is not connected */
494
-	};
495
-};
496
-
497436 &mdio0 {
498437 	rgmii_phy0: phy@0 {
499438 		compatible = "ethernet-phy-ieee802.3-c22";
....@@ -508,43 +447,50 @@
508447 	};
509448 };
510449 
450
+&video_phy0 {
451
+	status = "disabled";
452
+};
511453 
454
+&video_phy1 {
455
+	status = "disabled";
456
+};
512457 
513458 &pcie30phy {
514459 	status = "okay";
515460 };
516461 
517
-&pcie2x1 {
518
-	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
462
+&pcie3x2 {
463
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
519464 	vpcie3v3-supply = <&vcc3v3_pcie>;
520465 	status = "okay";
521466 };
522467 
523468 &pinctrl {
524
-//	cam {
525
-//		camera_pwr: camera-pwr {
526
-//			rockchip,pins =
527
-//				/* camera power en */
528
-//				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
529
-//		};
530
-//	};
469
+	cam {
470
+		camera_pwr: camera-pwr {
471
+			rockchip,pins =
472
+				/* camera power en */
473
+				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
474
+		};
475
+	};
531476 	headphone {
532477 		hp_det: hp-det {
533
-			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
478
+			rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
534479 		};
535480 	};
536481 
537482 	wireless-wlan {
538483 		wifi_host_wake_irq: wifi-host-wake-irq {
539
-			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
484
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
540485 		};
541486 	};
542487 
543488 	wireless-bluetooth {
544
-		uart1_gpios: uart1-gpios {
545
-			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
489
+		uart8_gpios: uart8-gpios {
490
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
546491 		};
547492 	};
493
+	
548494 	nk_io_init{
549495 		nk_io_gpio: nk-io-gpio{
550496 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
....@@ -554,19 +500,26 @@
554500 							<4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
555501 							<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
556502 							<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>,
557
-							<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
503
+							<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>, 
558504 							<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
559505 							<1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
560506 							<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
561
-							<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
562507 							<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
563508 							<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
564509 							<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
565510 							<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
566511 							<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
512
+							<2 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,//93 SPI2_CS0_M1_3V3
513
+							<2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>,//94 SPI2_MOSI_M1_3V3
514
+							<2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>,//95 SPI2_MISO_M1_3V3
515
+							<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,//96 SPI2_CLK_M1_3V3
567516 							<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
568517 		};
569518 	};
519
+};
520
+
521
+&rk809_sound {
522
+	hp-det-gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
570523 };
571524 
572525 &rkisp {
....@@ -578,7 +531,7 @@
578531 };
579532 
580533 &rkisp_vir0 {
581
-	status = "disabled";
534
+	status = "okay";
582535 
583536 	port {
584537 		#address-cells = <1>;
....@@ -596,30 +549,29 @@
596549 	connect = <&vp1_out_dsi0>;
597550 };
598551 
599
-
552
+&route_edp {
553
+	status = "okay";
554
+	connect = <&vp0_out_edp>;
555
+};
600556 
601557 &sata2 {
602558 	status = "okay";
603559 };
604560 
605561 &sdmmc2 {
606
-        status = "disabled";
607
-};
608
-
609
-&sdmmc1 {
610
-        max-frequency = <150000000>;
611
-        supports-sdio;
612
-        bus-width = <4>;
613
-        disable-wp;
614
-        cap-sd-highspeed;
615
-        cap-sdio-irq;
616
-        keep-power-in-suspend;
617
-        mmc-pwrseq = <&sdio_pwrseq>;
618
-        non-removable;
619
-        pinctrl-names = "default";
620
-        pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
621
-        sd-uhs-sdr104;
622
-        status = "okay";
562
+	max-frequency = <150000000>;
563
+	supports-sdio;
564
+	bus-width = <4>;
565
+	disable-wp;
566
+	cap-sd-highspeed;
567
+	cap-sdio-irq;
568
+	keep-power-in-suspend;
569
+	mmc-pwrseq = <&sdio_pwrseq>;
570
+	non-removable;
571
+	pinctrl-names = "default";
572
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
573
+	sd-uhs-sdr104;
574
+	status = "okay";
623575 };
624576 
625577 &spdif_8ch {
....@@ -629,13 +581,13 @@
629581 };
630582 
631583 &uart8 {
632
-	status = "disabled";
584
+	status = "okay";
633585 	pinctrl-names = "default";
634586 	pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
635587 };
636588 
637589 &vcc3v3_lcd0_n {
638
-	gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; 
590
+	gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
639591 	enable-active-high;
640592 };
641593 
....@@ -647,7 +599,7 @@
647599 &wireless_wlan {
648600 	pinctrl-names = "default";
649601 	pinctrl-0 = <&wifi_host_wake_irq>;
650
-	WIFI,host_wake_irq = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
602
+	WIFI,host_wake_irq = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
651603 };
652604 
653605 &wireless_bluetooth {
....@@ -655,42 +607,12 @@
655607 	clocks = <&rk809 1>;
656608 	clock-names = "ext_clock";
657609 	//wifi-bt-power-toggle;
658
-	uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
659
-	BT,power_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
610
+	uart_rts_gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
660611 	pinctrl-names = "default", "rts_gpio";
661
-	pinctrl-0 = <&uart1m0_rtsn>;
662
-	pinctrl-1 = <&uart1_gpios>;
612
+	pinctrl-0 = <&uart8m0_rtsn>;
613
+	pinctrl-1 = <&uart8_gpios>;
663614 	BT,reset_gpio    = <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;
664615 	BT,wake_gpio     = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
665616 	BT,wake_host_irq = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
666
-	status = "disabled";
667
-};
668
-
669
-&uart0 {
670617 	status = "okay";
671
-};
672
-
673
-&uart3 {
674
-	status = "okay";
675
-	pinctrl-0 = <&uart3m1_xfer>;
676
-};
677
-
678
-&uart4 {
679
-	status = "okay";
680
-	pinctrl-0 = <&uart4m1_xfer>;
681
-};
682
-
683
-&uart5 {
684
-	status = "okay";
685
-	pinctrl-0 = <&uart5m1_xfer>;
686
-};
687
-
688
-&uart7 {
689
-	status = "okay";
690
-	pinctrl-0 = <&uart7m1_xfer>;
691
-};
692
-
693
-&uart9 {
694
-	status = "okay";
695
-	pinctrl-0 = <&uart9m1_xfer>;
696618 };