update kernel to 5.10.198

hc

2024-01-03 2f7c68cb55ecb7331f2381deb497c27155f32faf

 kernel/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
..
..
@@ -22,9 +22,14 @@
22
22
 
23
23
 The names used for regulator nodes must match those supported by a given PMIC.
24
24
 Supported regulator node names:
25
+	PM8005:		smps1 - smps4
26
+	PM8009:		smps1 - smps2, ldo1 - ldo7
27
+	PM8150:		smps1 - smps10, ldo1 - ldo18
28
+	PM8150L:	smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
25
29
 	PM8998:		smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
26
30
 	PMI8998:	bob
27
-	PM8005:		smps1 - smps4
31
+	PM6150:         smps1 - smps5, ldo1 - ldo19
32
+	PM6150L:        smps1 - smps8, ldo1 - ldo11, bob
28
33
 
29
34
 ========================
30
35
 First Level Nodes - PMIC
..
..
@@ -33,9 +38,15 @@
33
38
 - compatible
34
39
 	Usage:      required
35
40
 	Value type: <string>
36
-	Definition: Must be one of: "qcom,pm8998-rpmh-regulators",
37
-		    "qcom,pmi8998-rpmh-regulators" or
38
-		    "qcom,pm8005-rpmh-regulators".
41
+	Definition: Must be one of below:
42
+		    "qcom,pm8005-rpmh-regulators"
43
+		    "qcom,pm8009-rpmh-regulators"
44
+		    "qcom,pm8150-rpmh-regulators"
45
+		    "qcom,pm8150l-rpmh-regulators"
46
+		    "qcom,pm8998-rpmh-regulators"
47
+		    "qcom,pmi8998-rpmh-regulators"
48
+		    "qcom,pm6150-rpmh-regulators"
49
+		    "qcom,pm6150l-rpmh-regulators"
39
50
 
40
51
 - qcom,pmic-id
41
52
 	Usage:      required
..
..
@@ -97,7 +108,7 @@
97
108
 		    sent for this regulator including those which are for a
98
109
 		    strictly lower power state.
99
110
 
100
-Other properties defined in Documentation/devicetree/bindings/regulator.txt
111
+Other properties defined in Documentation/devicetree/bindings/regulator/regulator.txt
101
112
 may also be used.  regulator-initial-mode and regulator-allowed-modes may be
102
113
 specified for VRM regulators using mode values from
103
114
 include/dt-bindings/regulator/qcom,rpmh-regulator.h.  regulator-allow-bypass