rtl8211F_led_control

hc

2024-05-11 297b60346df8beafee954a0fd7c2d64f33f3b9bc

 kernel/drivers/net/can/softing/Kconfig
..
..
@@ -1,17 +1,18 @@
1
+# SPDX-License-Identifier: GPL-2.0-only
1
2
 config CAN_SOFTING
2
3
 	tristate "Softing Gmbh CAN generic support"
3
4
 	depends on HAS_IOMEM
4
-	---help---
5
+	help
5
6
 	  Support for CAN cards from Softing Gmbh & some cards
6
7
 	  from Vector Gmbh.
7
-	  Softing Gmbh CAN cards come with 1 or 2 physical busses.
8
+	  Softing Gmbh CAN cards come with 1 or 2 physical buses.
8
9
 	  Those cards typically use Dual Port RAM to communicate
9
10
 	  with the host CPU. The interface is then identical for PCI
10
11
 	  and PCMCIA cards. This driver operates on a platform device,
11
12
 	  which has been created by softing_cs or softing_pci driver.
12
13
 	  Warning:
13
14
 	  The API of the card does not allow fine control per bus, but
14
-	  controls the 2 busses on the card together.
15
+	  controls the 2 buses on the card together.
15
16
 	  As such, some actions (start/stop/busoff recovery) on 1 bus
16
17
 	  must bring down the other bus too temporarily.
17
18
 
..
..
@@ -19,11 +20,11 @@
19
20
 	tristate "Softing Gmbh CAN pcmcia cards"
20
21
 	depends on PCMCIA
21
22
 	depends on CAN_SOFTING
22
-	---help---
23
+	help
23
24
 	  Support for PCMCIA cards from Softing Gmbh & some cards
24
25
 	  from Vector Gmbh.
25
26
 	  You need firmware for these, which you can get at
26
-	  http://developer.berlios.de/projects/socketcan/
27
+	  https://github.com/linux-can/can-firmware
27
28
 	  This version of the driver is written against
28
29
 	  firmware version 4.6 (softing-fw-4.6-binaries.tar.gz)
29
30
 	  In order to use the card as CAN device, you need the Softing generic