rtl8211F_led_control

hc

2024-05-11 297b60346df8beafee954a0fd7c2d64f33f3b9bc

 kernel/drivers/net/can/sja1000/Kconfig
..
..
@@ -1,55 +1,47 @@
1
+# SPDX-License-Identifier: GPL-2.0-only
2
+
1
3
 menuconfig CAN_SJA1000
2
4
 	tristate "Philips/NXP SJA1000 devices"
3
5
 	depends on HAS_IOMEM
4
6
 
5
7
 if CAN_SJA1000
6
8
 
7
-config CAN_SJA1000_ISA
8
-	tristate "ISA Bus based legacy SJA1000 driver"
9
-	---help---
10
-	  This driver adds legacy support for SJA1000 chips connected to
11
-	  the ISA bus using I/O port, memory mapped or indirect access.
12
-
13
-config CAN_SJA1000_PLATFORM
14
-	tristate "Generic Platform Bus based SJA1000 driver"
15
-	---help---
16
-	  This driver adds support for the SJA1000 chips connected to
17
-	  the "platform bus" (Linux abstraction for directly to the
18
-	  processor attached devices).  Which can be found on various
19
-	  boards from Phytec (http://www.phytec.de) like the PCM027,
20
-	  PCM038. It also provides the OpenFirmware "platform bus" found
21
-	  on embedded systems with OpenFirmware bindings, e.g. if you
22
-	  have a PowerPC based system you may want to enable this option.
23
-
24
-config CAN_EMS_PCMCIA
25
-	tristate "EMS CPC-CARD Card"
26
-	depends on PCMCIA
27
-	---help---
28
-	  This driver is for the one or two channel CPC-CARD cards from
29
-	  EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
30
-
31
9
 config CAN_EMS_PCI
32
10
 	tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
33
11
 	depends on PCI
34
-	---help---
12
+	help
35
13
 	  This driver is for the one, two or four channel CPC-PCI,
36
14
 	  CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
37
15
 	  (http://www.ems-wuensche.de).
38
16
 
39
-config CAN_PEAK_PCMCIA
40
-	tristate "PEAK PCAN-PC Card"
17
+config CAN_EMS_PCMCIA
18
+	tristate "EMS CPC-CARD Card"
41
19
 	depends on PCMCIA
42
-	depends on HAS_IOPORT_MAP
43
-	---help---
44
-	  This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
45
-	  from PEAK-System (http://www.peak-system.com). To compile this
46
-	  driver as a module, choose M here: the module will be called
47
-	  peak_pcmcia.
20
+	help
21
+	  This driver is for the one or two channel CPC-CARD cards from
22
+	  EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
23
+
24
+config CAN_F81601
25
+	tristate "Fintek F81601 PCIE to 2 CAN Controller"
26
+	depends on PCI
27
+	help
28
+	  This driver adds support for Fintek F81601 PCIE to 2 CAN
29
+	  Controller. It had internal 24MHz clock source, but it can
30
+	  be changed by manufacturer. Use modinfo to get usage for
31
+	  parameters. Visit http://www.fintek.com.tw to get more
32
+	  information.
33
+
34
+config CAN_KVASER_PCI
35
+	tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
36
+	depends on PCI
37
+	help
38
+	  This driver is for the PCIcanx and PCIcan cards (1, 2 or
39
+	  4 channel) from Kvaser (http://www.kvaser.com).
48
40
 
49
41
 config CAN_PEAK_PCI
50
42
 	tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards"
51
43
 	depends on PCI
52
-	---help---
44
+	help
53
45
 	  This driver is for the PCAN-PCI/PCIe/miniPCI cards
54
46
 	  (1, 2, 3 or 4 channels) from PEAK-System Technik
55
47
 	  (http://www.peak-system.com).
..
..
@@ -60,22 +52,25 @@
60
52
 	select I2C
61
53
 	select I2C_ALGOBIT
62
54
 	default y
63
-	---help---
55
+	help
64
56
 	  Say Y here if you want to use a PCAN-ExpressCard from PEAK-System
65
57
 	  Technik. This will also automatically select I2C and I2C_ALGO
66
58
 	  configuration options.
67
59
 
68
-config CAN_KVASER_PCI
69
-	tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
70
-	depends on PCI
71
-	---help---
72
-	  This driver is for the PCIcanx and PCIcan cards (1, 2 or
73
-	  4 channel) from Kvaser (http://www.kvaser.com).
60
+config CAN_PEAK_PCMCIA
61
+	tristate "PEAK PCAN-PC Card"
62
+	depends on PCMCIA
63
+	depends on HAS_IOPORT_MAP
64
+	help
65
+	  This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
66
+	  from PEAK-System (http://www.peak-system.com). To compile this
67
+	  driver as a module, choose M here: the module will be called
68
+	  peak_pcmcia.
74
69
 
75
70
 config CAN_PLX_PCI
76
71
 	tristate "PLX90xx PCI-bridge based Cards"
77
72
 	depends on PCI
78
-	---help---
73
+	help
79
74
 	  This driver is for CAN interface cards based on
80
75
 	  the PLX90xx PCI bridge.
81
76
 	  Driver supports now:
..
..
@@ -88,6 +83,24 @@
88
83
 	   - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
89
84
 	   - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/)
90
85
 	   - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com)
86
+	   - ASEM CAN raw - 2 isolated CAN channels (www.asem.it)
87
+
88
+config CAN_SJA1000_ISA
89
+	tristate "ISA Bus based legacy SJA1000 driver"
90
+	help
91
+	  This driver adds legacy support for SJA1000 chips connected to
92
+	  the ISA bus using I/O port, memory mapped or indirect access.
93
+
94
+config CAN_SJA1000_PLATFORM
95
+	tristate "Generic Platform Bus based SJA1000 driver"
96
+	help
97
+	  This driver adds support for the SJA1000 chips connected to
98
+	  the "platform bus" (Linux abstraction for directly to the
99
+	  processor attached devices).  Which can be found on various
100
+	  boards from Phytec (http://www.phytec.de) like the PCM027,
101
+	  PCM038. It also provides the OpenFirmware "platform bus" found
102
+	  on embedded systems with OpenFirmware bindings, e.g. if you
103
+	  have a PowerPC based system you may want to enable this option.
91
104
 
92
105
 config CAN_TSCAN1
93
106
 	tristate "TS-CAN1 PC104 boards"