forked from ~ljy/RK356X_SDK_RELEASE
blame | history | patch | commit | commitdiff
hc
2024-10-09 244b2c5ca8b14627e4a17755e5922221e121c771 
 kernel/drivers/spi/Kconfig
....@@ -1,3 +1,4 @@
1
+# SPDX-License-Identifier: GPL-2.0-only
12 #
23 # SPI driver configuration
34 #
....@@ -58,12 +59,20 @@
5859 
5960 config SPI_ALTERA
6061 	tristate "Altera SPI Controller"
62
+	select REGMAP_MMIO
6163 	help
6264 	  This is the driver for the Altera SPI Controller.
6365 
66
+config SPI_AR934X
67
+	tristate "Qualcomm Atheros AR934X/QCA95XX SPI controller driver"
68
+	depends on ATH79 || COMPILE_TEST
69
+	help
70
+	  This enables support for the SPI controller present on the
71
+	  Qualcomm Atheros AR934X/QCA95XX SoCs.
72
+
6473 config SPI_ATH79
6574 	tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver"
66
-	depends on ATH79 && GPIOLIB
75
+	depends on ATH79 || COMPILE_TEST
6776 	select SPI_BITBANG
6877 	help
6978 	  This enables support for the SPI controller present on the
....@@ -79,9 +88,27 @@
7988 config SPI_ATMEL
8089 	tristate "Atmel SPI Controller"
8190 	depends on ARCH_AT91 || COMPILE_TEST
91
+	depends on OF
8292 	help
8393 	  This selects a driver for the Atmel SPI Controller, present on
8494 	  many AT91 ARM chips.
95
+
96
+config SPI_AT91_USART
97
+	tristate "Atmel USART Controller SPI driver"
98
+	depends on (ARCH_AT91 || COMPILE_TEST)
99
+	depends on MFD_AT91_USART
100
+	help
101
+	  This selects a driver for the AT91 USART Controller as SPI Master,
102
+	  present on AT91 and SAMA5 SoC series.
103
+
104
+config SPI_ATMEL_QUADSPI
105
+	tristate "Atmel Quad SPI Controller"
106
+	depends on ARCH_AT91 || COMPILE_TEST
107
+	depends on OF && HAS_IOMEM
108
+	help
109
+	  This enables support for the Quad SPI controller in master mode.
110
+	  This driver does not support generic SPI. The implementation only
111
+	  supports spi-mem interface.
85112 
86113 config SPI_AU1550
87114 	tristate "Au1550/Au1200/Au1300 SPI Controller"
....@@ -102,7 +129,7 @@
102129 config SPI_BCM2835
103130 	tristate "BCM2835 SPI controller"
104131 	depends on GPIOLIB
105
-	depends on ARCH_BCM2835 || COMPILE_TEST
132
+	depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST
106133 	help
107134 	  This selects a driver for the Broadcom BCM2835 SPI master.
108135 
....@@ -113,7 +140,7 @@
113140 
114141 config SPI_BCM2835AUX
115142 	tristate "BCM2835 SPI auxiliary controller"
116
-	depends on (ARCH_BCM2835 && GPIOLIB) || COMPILE_TEST
143
+	depends on ((ARCH_BCM2835 || ARCH_BRCMSTB) && GPIOLIB) || COMPILE_TEST
117144 	help
118145 	  This selects a driver for the Broadcom BCM2835 SPI aux master.
119146 
....@@ -123,13 +150,13 @@
123150 
124151 config SPI_BCM63XX
125152 	tristate "Broadcom BCM63xx SPI controller"
126
-	depends on BCM63XX || COMPILE_TEST
153
+	depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
127154 	help
128
-          Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
155
+	  Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
129156 
130157 config SPI_BCM63XX_HSSPI
131158 	tristate "Broadcom BCM63XX HS SPI controller driver"
132
-	depends on BCM63XX || COMPILE_TEST
159
+	depends on BCM63XX || BMIPS_GENERIC || ARCH_BCM_63XX || COMPILE_TEST
133160 	help
134161 	  This enables support for the High Speed SPI controller present on
135162 	  newer Broadcom BCM63XX SoCs.
....@@ -142,7 +169,7 @@
142169 	help
143170 	  Enables support for the Broadcom SPI flash and MSPI controller.
144171 	  Select this option for any one of BRCMSTB, iProc NSP and NS2 SoCs
145
-	  based platforms. This driver works for both SPI master for spi-nor
172
+	  based platforms. This driver works for both SPI master for SPI NOR
146173 	  flash device as well as MSPI device.
147174 
148175 config SPI_BITBANG
....@@ -174,6 +201,17 @@
174201 	  This selects the Cadence SPI controller master driver
175202 	  used by Xilinx Zynq and ZynqMP.
176203 
204
+config SPI_CADENCE_QUADSPI
205
+	tristate "Cadence Quad SPI controller"
206
+	depends on OF && (ARM || ARM64 || COMPILE_TEST)
207
+	help
208
+	  Enable support for the Cadence Quad SPI Flash controller.
209
+
210
+	  Cadence QSPI is a specialized controller for connecting an SPI
211
+	  Flash over 1/2/4-bit wide bus. Enable this option if you have a
212
+	  device with a Cadence QSPI controller and want to access the
213
+	  Flash as an MTD device.
214
+
177215 config SPI_CLPS711X
178216 	tristate "CLPS711X host SPI controller"
179217 	depends on ARCH_CLPS711X || COMPILE_TEST
....@@ -197,30 +235,61 @@
197235 
198236 config SPI_DESIGNWARE
199237 	tristate "DesignWare SPI controller core support"
238
+	imply SPI_MEM
200239 	help
201240 	  general driver for SPI controller core from DesignWare
202241 
242
+if SPI_DESIGNWARE
243
+
244
+config SPI_DW_DMA
245
+	bool "DMA support for DW SPI controller"
246
+
203247 config SPI_DW_PCI
204248 	tristate "PCI interface driver for DW SPI core"
205
-	depends on SPI_DESIGNWARE && PCI
206
-
207
-config SPI_DW_MID_DMA
208
-	bool "DMA support for DW SPI controller on Intel MID platform"
209
-	depends on SPI_DW_PCI && DW_DMAC_PCI
249
+	depends on PCI
210250 
211251 config SPI_DW_MMIO
212252 	tristate "Memory-mapped io interface driver for DW SPI core"
213
-	depends on SPI_DESIGNWARE
253
+	depends on HAS_IOMEM
254
+
255
+config SPI_DW_BT1
256
+	tristate "Baikal-T1 SPI driver for DW SPI core"
257
+	depends on MIPS_BAIKAL_T1 || COMPILE_TEST
258
+	select MULTIPLEXER
259
+	help
260
+	  Baikal-T1 SoC is equipped with three DW APB SSI-based MMIO SPI
261
+	  controllers. Two of them are pretty much normal: with IRQ, DMA,
262
+	  FIFOs of 64 words depth, 4x CSs, but the third one as being a
263
+	  part of the Baikal-T1 System Boot Controller has got a very
264
+	  limited resources: no IRQ, no DMA, only a single native
265
+	  chip-select and Tx/Rx FIFO with just 8 words depth available.
266
+	  The later one is normally connected to an external SPI-nor flash
267
+	  of 128Mb (in general can be of bigger size).
268
+
269
+config SPI_DW_BT1_DIRMAP
270
+	bool "Directly mapped Baikal-T1 Boot SPI flash support"
271
+	depends on SPI_DW_BT1
272
+	help
273
+	  Directly mapped SPI flash memory is an interface specific to the
274
+	  Baikal-T1 System Boot Controller. It is a 16MB MMIO region, which
275
+	  can be used to access a peripheral memory device just by
276
+	  reading/writing data from/to it. Note that the system APB bus
277
+	  will stall during each IO from/to the dirmap region until the
278
+	  operation is finished. So try not to use it concurrently with
279
+	  time-critical tasks (like the SPI memory operations implemented
280
+	  in this driver).
281
+
282
+endif
214283 
215284 config SPI_DLN2
216285        tristate "Diolan DLN-2 USB SPI adapter"
217286        depends on MFD_DLN2
218287        help
219
-         If you say yes to this option, support will be included for Diolan
220
-         DLN2, a USB to SPI interface.
288
+	 If you say yes to this option, support will be included for Diolan
289
+	 DLN2, a USB to SPI interface.
221290 
222
-         This driver can also be built as a module.  If so, the module
223
-         will be called spi-dln2.
291
+	 This driver can also be built as a module.  If so, the module
292
+	 will be called spi-dln2.
224293 
225294 config SPI_EFM32
226295 	tristate "EFM32 SPI controller"
....@@ -245,11 +314,47 @@
245314 	  has only been tested with m25p80 type chips. The hardware has no
246315 	  support for other types of SPI peripherals.
247316 
317
+config SPI_FSI
318
+	tristate "FSI SPI driver"
319
+	depends on FSI
320
+	help
321
+	  This enables support for the driver for FSI bus attached SPI
322
+	  controllers.
323
+
248324 config SPI_FSL_LPSPI
249325 	tristate "Freescale i.MX LPSPI controller"
250326 	depends on ARCH_MXC || COMPILE_TEST
251327 	help
252328 	  This enables Freescale i.MX LPSPI controllers in master mode.
329
+
330
+config SPI_FSL_QUADSPI
331
+	tristate "Freescale QSPI controller"
332
+	depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
333
+	depends on HAS_IOMEM
334
+	help
335
+	  This enables support for the Quad SPI controller in master mode.
336
+	  Up to four flash chips can be connected on two buses with two
337
+	  chipselects each.
338
+	  This controller does not support generic SPI messages. It only
339
+	  supports the high-level SPI memory interface.
340
+
341
+config SPI_HISI_SFC_V3XX
342
+	tristate "HiSilicon SPI NOR Flash Controller for Hi16XX chipsets"
343
+	depends on (ARM64 && ACPI) || COMPILE_TEST
344
+	depends on HAS_IOMEM
345
+	help
346
+	  This enables support for HiSilicon v3xx SPI NOR flash controller
347
+	  found in hi16xx chipsets.
348
+
349
+config SPI_NXP_FLEXSPI
350
+	tristate "NXP Flex SPI controller"
351
+	depends on ARCH_LAYERSCAPE || HAS_IOMEM
352
+	help
353
+	  This enables support for the Flex SPI controller in master mode.
354
+	  Up to four slave devices can be connected on two buses with two
355
+	  chipselects each.
356
+	  This controller does not support generic SPI messages and only
357
+	  supports the high-level SPI memory interface.
253358 
254359 config SPI_GPIO
255360 	tristate "GPIO-based bitbanging SPI Master"
....@@ -279,8 +384,7 @@
279384 	depends on ARCH_MXC || COMPILE_TEST
280385 	select SPI_BITBANG
281386 	help
282
-	  This enables using the Freescale i.MX SPI controllers in master
283
-	  mode.
387
+	  This enables support for the Freescale i.MX SPI controllers.
284388 
285389 config SPI_JCORE
286390 	tristate "J-Core SPI Master"
....@@ -355,7 +459,7 @@
355459 	depends on SOC_VF610 || SOC_LS1021A || ARCH_LAYERSCAPE || M5441x || COMPILE_TEST
356460 	help
357461 	  This enables support for the Freescale DSPI controller in master
358
-	  mode. VF610 platform uses the controller.
462
+	  mode. VF610, LS1021A and ColdFire platforms uses the controller.
359463 
360464 config SPI_FSL_ESPI
361465 	tristate "Freescale eSPI controller"
....@@ -367,6 +471,7 @@
367471 
368472 config SPI_MESON_SPICC
369473 	tristate "Amlogic Meson SPICC controller"
474
+	depends on COMMON_CLK
370475 	depends on ARCH_MESON || COMPILE_TEST
371476 	help
372477 	  This enables master mode support for the SPICC (SPI communication
....@@ -389,20 +494,46 @@
389494 	  say Y or M here.If you are not sure, say N.
390495 	  SPI drivers for Mediatek MT65XX and MT81XX series ARM SoCs.
391496 
392
-config SPI_NUC900
393
-	tristate "Nuvoton NUC900 series SPI"
394
-	depends on ARCH_W90X900
395
-	select SPI_BITBANG
497
+config SPI_MT7621
498
+	tristate "MediaTek MT7621 SPI Controller"
499
+	depends on RALINK || COMPILE_TEST
396500 	help
397
-	  SPI driver for Nuvoton NUC900 series ARM SoCs
501
+	  This selects a driver for the MediaTek MT7621 SPI Controller.
502
+
503
+config SPI_MTK_NOR
504
+	tristate "MediaTek SPI NOR controller"
505
+	depends on ARCH_MEDIATEK || COMPILE_TEST
506
+	help
507
+	  This enables support for SPI NOR controller found on MediaTek
508
+	  ARM SoCs. This is a controller specifically for SPI NOR flash.
509
+	  It can perform generic SPI transfers up to 6 bytes via generic
510
+	  SPI interface as well as several SPI NOR specific instructions
511
+	  via SPI MEM interface.
512
+
513
+config SPI_NPCM_FIU
514
+	tristate "Nuvoton NPCM FLASH Interface Unit"
515
+	depends on ARCH_NPCM || COMPILE_TEST
516
+	depends on OF && HAS_IOMEM
517
+	help
518
+	  This enables support for the Flash Interface Unit SPI controller
519
+	  in master mode.
520
+	  This driver does not support generic SPI. The implementation only
521
+	  supports spi-mem interface.
522
+
523
+config SPI_NPCM_PSPI
524
+	tristate "Nuvoton NPCM PSPI Controller"
525
+	depends on ARCH_NPCM || COMPILE_TEST
526
+	help
527
+	  This driver provides support for Nuvoton NPCM BMC
528
+	  Peripheral SPI controller in master mode.
398529 
399530 config SPI_LANTIQ_SSC
400531 	tristate "Lantiq SSC SPI controller"
401
-	depends on LANTIQ || COMPILE_TEST
532
+	depends on LANTIQ || X86 || COMPILE_TEST
402533 	help
403534 	  This driver supports the Lantiq SSC SPI controller in master
404535 	  mode. This controller is found on Intel (former Lantiq) SoCs like
405
-	  the Danube, Falcon, xRX200, xRX300.
536
+	  the Danube, Falcon, xRX200, xRX300, Lightning Mountain.
406537 
407538 config SPI_OC_TINY
408539 	tristate "OpenCores tiny SPI"
....@@ -427,7 +558,7 @@
427558 
428559 config SPI_OMAP24XX
429560 	tristate "McSPI driver for OMAP"
430
-	depends on ARCH_OMAP2PLUS || COMPILE_TEST
561
+	depends on ARCH_OMAP2PLUS || ARCH_K3 || COMPILE_TEST
431562 	select SG_SPLIT
432563 	help
433564 	  SPI master controller for OMAP24XX and later Multichannel SPI
....@@ -487,12 +618,12 @@
487618 
488619 config SPI_PXA2XX
489620 	tristate "PXA2xx SSP SPI master"
490
-	depends on (ARCH_PXA || ARCH_MMP || PCI || ACPI)
621
+	depends on ARCH_PXA || ARCH_MMP || PCI || ACPI || COMPILE_TEST
491622 	select PXA_SSP if ARCH_PXA || ARCH_MMP
492623 	help
493624 	  This enables using a PXA2xx or Sodaville SSP port as a SPI master
494625 	  controller. The driver can be configured to use any SSP port and
495
-	  additional documentation can be found a Documentation/spi/pxa2xx.
626
+	  additional documentation can be found a Documentation/spi/pxa2xx.rst.
496627 
497628 config SPI_PXA2XX_PCI
498629 	def_tristate SPI_PXA2XX && PCI && COMMON_CLK
....@@ -518,11 +649,41 @@
518649 	  for each spi controller and support to get the controller register
519650 	  resource by calling mmap.
520651 
652
+config SPI_ROCKCHIP_SFC
653
+	tristate "Rockchip Serial Flash Controller (SFC)"
654
+	imply ROCKCHIP_MTD_VENDOR_STORAGE
655
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
656
+	depends on HAS_IOMEM && HAS_DMA
657
+	help
658
+	  This enables support for Rockchip serial flash controller. This
659
+	  is a specialized controller used to access SPI flash on some
660
+	  Rockchip SOCs.
661
+
662
+	  ROCKCHIP SFC supports DMA and PIO modes. When DMA is not available,
663
+	  the driver automatically falls back to PIO mode.
664
+
665
+config SPI_ROCKCHIP_SLAVE
666
+	tristate "Rockchip SPI Slave controller driver"
667
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
668
+	default SPI_ROCKCHIP if !ROCKCHIP_MINI_KERNEL
669
+	help
670
+	  This selects a driver for Rockchip SPI Slave controller.
671
+
672
+	  If you say yes to this option, support will be included for Rockchip
673
+	  SPI Slave controller.
674
+	  Rockchip SPI Slave controller support DMA transport and IRQ mode.
675
+
521676 config SPI_RB4XX
522677 	tristate "Mikrotik RB4XX SPI master"
523678 	depends on SPI_MASTER && ATH79
524679 	help
525680 	  SPI controller driver for the Mikrotik RB4xx series boards.
681
+
682
+config SPI_RPCIF
683
+	tristate "Renesas RPC-IF SPI driver"
684
+	depends on RENESAS_RPCIF
685
+	help
686
+	  SPI driver for Renesas R-Car Gen3 RPC-IF.
526687 
527688 config SPI_RSPI
528689 	tristate "Renesas RSPI/QSPI controller"
....@@ -530,9 +691,15 @@
530691 	help
531692 	  SPI driver for Renesas RSPI and QSPI blocks.
532693 
694
+config SPI_QCOM_QSPI
695
+	tristate "QTI QSPI controller"
696
+	depends on ARCH_QCOM
697
+	help
698
+	  QSPI(Quad SPI) driver for Qualcomm QSPI controller.
699
+
533700 config SPI_QUP
534701 	tristate "Qualcomm SPI controller with QUP interface"
535
-	depends on ARCH_QCOM || (ARM && COMPILE_TEST)
702
+	depends on ARCH_QCOM || COMPILE_TEST
536703 	help
537704 	  Qualcomm Universal Peripheral (QUP) core is an AHB slave that
538705 	  provides a common data path (an output FIFO and an input FIFO)
....@@ -542,6 +709,18 @@
542709 
543710 	  This driver can also be built as a module.  If so, the module
544711 	  will be called spi_qup.
712
+
713
+config SPI_QCOM_GENI
714
+	tristate "Qualcomm GENI based SPI controller"
715
+	depends on QCOM_GENI_SE
716
+	help
717
+	  This driver supports GENI serial engine based SPI controller in
718
+	  master mode on the Qualcomm Technologies Inc.'s SoCs. If you say
719
+	  yes to this option, support will be included for the built-in SPI
720
+	  interface on the Qualcomm Technologies Inc.'s SoCs.
721
+
722
+	  This driver can also be built as a module.  If so, the module
723
+	  will be called spi-geni-qcom.
545724 
546725 config SPI_S3C24XX
547726 	tristate "Samsung S3C24XX series SPI"
....@@ -563,7 +742,7 @@
563742 
564743 config SPI_S3C64XX
565744 	tristate "Samsung S3C64XX series type SPI"
566
-	depends on (PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST)
745
+	depends on (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST)
567746 	help
568747 	  SPI driver for Samsung S3C64XX and newer SoCs.
569748 
....@@ -599,12 +778,34 @@
599778 	help
600779 	  SPI driver for SuperH HSPI blocks.
601780 
781
+config SPI_SIFIVE
782
+	tristate "SiFive SPI controller"
783
+	depends on HAS_IOMEM
784
+	help
785
+	  This exposes the SPI controller IP from SiFive.
786
+
602787 config SPI_SIRF
603788 	tristate "CSR SiRFprimaII SPI controller"
604789 	depends on SIRF_DMA
605790 	select SPI_BITBANG
606791 	help
607792 	  SPI driver for CSR SiRFprimaII SoCs
793
+
794
+config SPI_SLAVE_MT27XX
795
+	tristate "MediaTek SPI slave device"
796
+	depends on ARCH_MEDIATEK || COMPILE_TEST
797
+	depends on SPI_SLAVE
798
+	help
799
+	  This selects the MediaTek(R) SPI slave device driver.
800
+	  If you want to use MediaTek(R) SPI slave interface,
801
+	  say Y or M here.If you are not sure, say N.
802
+	  SPI slave drivers for Mediatek MT27XX series ARM SoCs.
803
+
804
+config SPI_SPRD
805
+	tristate "Spreadtrum SPI controller"
806
+	depends on ARCH_SPRD || COMPILE_TEST
807
+	help
808
+	  SPI driver for Spreadtrum SoCs.
608809 
609810 config SPI_SPRD_ADI
610811 	tristate "Spreadtrum ADI controller"
....@@ -617,11 +818,20 @@
617818 	tristate "STMicroelectronics STM32 SPI controller"
618819 	depends on ARCH_STM32 || COMPILE_TEST
619820 	help
620
-	  SPI driver for STMicroelectonics STM32 SoCs.
821
+	  SPI driver for STMicroelectronics STM32 SoCs.
621822 
622823 	  STM32 SPI controller supports DMA and PIO modes. When DMA
623824 	  is not available, the driver automatically falls back to
624825 	  PIO mode.
826
+
827
+config SPI_STM32_QSPI
828
+	tristate "STMicroelectronics STM32 QUAD SPI controller"
829
+	depends on ARCH_STM32 || COMPILE_TEST
830
+	depends on OF
831
+	help
832
+	  This enables support for the Quad SPI controller in master mode.
833
+	  This driver does not support generic SPI. The implementation only
834
+	  supports spi-mem interface.
625835 
626836 config SPI_ST_SSC4
627837 	tristate "STMicroelectronics SPI SSC-based driver"
....@@ -642,6 +852,22 @@
642852 	depends on RESET_CONTROLLER
643853 	help
644854 	  This enables using the SPI controller on the Allwinner A31 SoCs.
855
+
856
+config SPI_SYNQUACER
857
+	tristate "Socionext's SynQuacer HighSpeed SPI controller"
858
+	depends on ARCH_SYNQUACER || COMPILE_TEST
859
+	help
860
+	  SPI driver for Socionext's High speed SPI controller which provides
861
+	  various operating modes for interfacing to serial peripheral devices
862
+	  that use the de-facto standard SPI protocol.
863
+
864
+	  It also supports the new dual-bit and quad-bit SPI protocol.
865
+
866
+config SPI_MXIC
867
+	tristate "Macronix MX25F0A SPI controller"
868
+	depends on SPI_MASTER
869
+	help
870
+	  This selects the Macronix MX25F0A SPI controller driver.
645871 
646872 config SPI_MXS
647873 	tristate "Freescale MXS SPI controller"
....@@ -701,6 +927,7 @@
701927 config SPI_UNIPHIER
702928 	tristate "Socionext UniPhier SPI Controller"
703929 	depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
930
+	depends on HAS_IOMEM
704931 	help
705932 	  This enables a driver for the Socionext UniPhier SoC SCSSI SPI controller.
706933 
....@@ -753,15 +980,40 @@
753980 	  16 bit words in SPI mode 0, automatically asserting CS on transfer
754981 	  start and deasserting on end.
755982 
983
+config SPI_ZYNQ_QSPI
984
+	tristate "Xilinx Zynq QSPI controller"
985
+	depends on ARCH_ZYNQ || COMPILE_TEST
986
+	help
987
+	  This enables support for the Zynq Quad SPI controller
988
+	  in master mode.
989
+	  This controller only supports SPI memory interface.
990
+
756991 config SPI_ZYNQMP_GQSPI
757992 	tristate "Xilinx ZynqMP GQSPI controller"
758
-	depends on SPI_MASTER && HAS_DMA
993
+	depends on (SPI_MASTER && HAS_DMA) || COMPILE_TEST
759994 	help
760995 	  Enables Xilinx GQSPI controller driver for Zynq UltraScale+ MPSoC.
996
+
997
+config SPI_AMD
998
+	tristate "AMD SPI controller"
999
+	depends on SPI_MASTER || COMPILE_TEST
1000
+	help
1001
+	  Enables SPI controller driver for AMD SoC.
7611002 
7621003 #
7631004 # Add new SPI master controllers in alphabetical order above this line
7641005 #
1006
+
1007
+comment "SPI Multiplexer support"
1008
+
1009
+config SPI_MUX
1010
+	tristate "SPI multiplexer support"
1011
+	select MULTIPLEXER
1012
+	help
1013
+	  This adds support for SPI multiplexers. Each SPI mux will be
1014
+	  accessible as a SPI controller, the devices behind the mux will appear
1015
+	  to be chip selects on this controller. It is still necessary to
1016
+	  select one or more specific mux-controller drivers.
7651017 
7661018 #
7671019 # There are lots of SPI device types, with sensors and memory
....@@ -825,6 +1077,12 @@
8251077 	  SPI slave handler to allow remote control of system reboot, power
8261078 	  off, halt, and suspend.
8271079 
1080
+config SPI_SLAVE_ROCKCHIP_OBJ
1081
+	tristate "Rockchip SPI slave inter transmission protocol demo"
1082
+	help
1083
+	  SPI slave with a rockchip protocol specification for SPI slave
1084
+	  transmission, work with the corresponding master driver spidev_rkmst.
1085
+
8281086 endif # SPI_SLAVE
8291087 
8301088 config SPI_DYNAMIC