disable FB

hc

2024-01-04 1543e317f1da31b75942316931e8f491a8920811

 kernel/drivers/staging/axis-fifo/axis-fifo.txt
..
..
@@ -25,10 +25,10 @@
25
25
 - xlnx,axi-str-txc-tdata-width: Should be <0x20>
26
26
 - xlnx,axi-str-txd-protocol: Should be "XIL_AXI_STREAM_ETH_DATA"
27
27
 - xlnx,axi-str-txd-tdata-width: Should be <0x20>
28
-- xlnx,axis-tdest-width: AXI-Stream TDEST width
29
-- xlnx,axis-tid-width: AXI-Stream TID width
30
-- xlnx,axis-tuser-width: AXI-Stream TUSER width
31
-- xlnx,data-interface-type: Should be <0x0>
28
+- xlnx,axis-tdest-width: AXI-Stream TDEST width (ignored by the driver)
29
+- xlnx,axis-tid-width: AXI-Stream TID width (ignored by the driver)
30
+- xlnx,axis-tuser-width: AXI-Stream TUSER width (ignored by the driver)
31
+- xlnx,data-interface-type: Should be <0x0> (ignored by the driver)
32
32
 - xlnx,has-axis-tdest: Should be <0x0> (this feature isn't supported)
33
33
 - xlnx,has-axis-tid: Should be <0x0> (this feature isn't supported)
34
34
 - xlnx,has-axis-tkeep: Should be <0x0> (this feature isn't supported)
..
..
@@ -36,13 +36,17 @@
36
36
 - xlnx,has-axis-tuser: Should be <0x0> (this feature isn't supported)
37
37
 - xlnx,rx-fifo-depth: Depth of RX FIFO in words
38
38
 - xlnx,rx-fifo-pe-threshold: RX programmable empty interrupt threshold
39
+	(ignored by the driver)
39
40
 - xlnx,rx-fifo-pf-threshold: RX programmable full interrupt threshold
40
-- xlnx,s-axi-id-width: Should be <0x4>
41
-- xlnx,s-axi4-data-width: Should be <0x20>
42
-- xlnx,select-xpm: Should be <0x0>
41
+	(ignored by the driver)
42
+- xlnx,s-axi-id-width: Should be <0x4> (ignored by the driver)
43
+- xlnx,s-axi4-data-width: Should be <0x20> (ignored by the driver)
44
+- xlnx,select-xpm: Should be <0x0> (ignored by the driver)
43
45
 - xlnx,tx-fifo-depth: Depth of TX FIFO in words
44
46
 - xlnx,tx-fifo-pe-threshold: TX programmable empty interrupt threshold
47
+	(ignored by the driver)
45
48
 - xlnx,tx-fifo-pf-threshold: TX programmable full interrupt threshold
49
+	(ignored by the driver)
46
50
 - xlnx,use-rx-cut-through: Should be <0x0> (this feature isn't supported)
47
51
 - xlnx,use-rx-data: <0x1> if RX FIFO is enabled, <0x0> otherwise
48
52
 - xlnx,use-tx-ctrl: Should be <0x0> (this feature isn't supported)