disable FB

hc

2024-01-04 1543e317f1da31b75942316931e8f491a8920811

 kernel/drivers/gpu/drm/rockchip/cdn-dp-link-training.c
..
..
@@ -14,14 +14,24 @@
14
14
 static void cdn_dp_set_signal_levels(struct cdn_dp_device *dp)
15
15
 {
16
16
 	struct cdn_dp_port *port = dp->port[dp->active_port];
17
-	int rate = drm_dp_bw_code_to_link_rate(dp->link.rate);
17
+	union phy_configure_opts phy_cfg = {0};
18
18
 	u8 swing = (dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) >>
19
19
 		   DP_TRAIN_VOLTAGE_SWING_SHIFT;
20
20
 	u8 pre_emphasis = (dp->train_set[0] & DP_TRAIN_PRE_EMPHASIS_MASK)
21
21
 			  >> DP_TRAIN_PRE_EMPHASIS_SHIFT;
22
+	unsigned int lane;
22
23
 
23
-	tcphy_dp_set_phy_config(port->phy, rate, dp->link.num_lanes,
24
-				swing, pre_emphasis);
24
+	for (lane = 0; lane < dp->max_lanes; lane++) {
25
+		phy_cfg.dp.voltage[lane] = swing;
26
+		phy_cfg.dp.pre[lane] = pre_emphasis;
27
+	}
28
+
29
+	phy_cfg.dp.lanes = dp->max_lanes;
30
+	phy_cfg.dp.link_rate = drm_dp_bw_code_to_link_rate(dp->max_rate) / 100;
31
+	phy_cfg.dp.set_lanes = false;
32
+	phy_cfg.dp.set_rate = false;
33
+	phy_cfg.dp.set_voltages = true;
34
+	phy_configure(port->phy, &phy_cfg);
25
35
 }
26
36
 
27
37
 static int cdn_dp_set_pattern(struct cdn_dp_device *dp, uint8_t dp_train_pat)
..
..
@@ -30,7 +40,7 @@
30
40
 	int ret;
31
41
 	uint8_t pattern = dp_train_pat & DP_TRAINING_PATTERN_MASK;
32
42
 
33
-	global_config = NUM_LANES(dp->link.num_lanes - 1) | SST_MODE |
43
+	global_config = NUM_LANES(dp->max_lanes - 1) | SST_MODE |
34
44
 			GLOBAL_EN | RG_EN | ENC_RST_DIS | WR_VHSYNC_FALL;
35
45
 
36
46
 	phy_config = DP_TX_PHY_ENCODER_BYPASS(0) |
..
..
@@ -63,7 +73,7 @@
63
73
 		return ret;
64
74
 	}
65
75
 
66
-	ret = cdn_dp_reg_write(dp, DPTX_LANE_EN, BIT(dp->link.num_lanes) - 1);
76
+	ret = cdn_dp_reg_write(dp, DPTX_LANE_EN, BIT(dp->max_lanes) - 1);
67
77
 	if (ret) {
68
78
 		DRM_ERROR("fail to set DPTX_LANE_EN, error: %d\n", ret);
69
79
 		return ret;
..
..
@@ -106,7 +116,7 @@
106
116
 	uint8_t v = 0, p = 0;
107
117
 	uint8_t preemph_max;
108
118
 
109
-	for (i = 0; i < dp->link.num_lanes; i++) {
119
+	for (i = 0; i < dp->max_lanes; i++) {
110
120
 		v = max(v, drm_dp_get_adjust_request_voltage(link_status, i));
111
121
 		p = max(p, drm_dp_get_adjust_request_pre_emphasis(link_status,
112
122
 								  i));
..
..
@@ -119,7 +129,7 @@
119
129
 	if (p >= preemph_max)
120
130
 		p = preemph_max | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
121
131
 
122
-	for (i = 0; i < dp->link.num_lanes; i++)
132
+	for (i = 0; i < dp->max_lanes; i++)
123
133
 		dp->train_set[i] = v | p;
124
134
 }
125
135
 
..
..
@@ -149,7 +159,7 @@
149
159
 {
150
160
 	int lane;
151
161
 
152
-	for (lane = 0; lane < dp->link.num_lanes; lane++)
162
+	for (lane = 0; lane < dp->max_lanes; lane++)
153
163
 		if ((dp->train_set[lane] & DP_TRAIN_MAX_SWING_REACHED) == 0)
154
164
 			return false;
155
165
 
..
..
@@ -163,8 +173,8 @@
163
173
 	cdn_dp_set_signal_levels(dp);
164
174
 
165
175
 	ret = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_LANE0_SET,
166
-				dp->train_set, dp->link.num_lanes);
167
-	if (ret != dp->link.num_lanes)
176
+				dp->train_set, dp->max_lanes);
177
+	if (ret != dp->max_lanes)
168
178
 		return -EINVAL;
169
179
 
170
180
 	return 0;
..
..
@@ -183,8 +193,8 @@
183
193
 		len = 1;
184
194
 	} else {
185
195
 		/* DP_TRAINING_LANEx_SET follow DP_TRAINING_PATTERN_SET */
186
-		memcpy(buf + 1, dp->train_set, dp->link.num_lanes);
187
-		len = dp->link.num_lanes + 1;
196
+		memcpy(buf + 1, dp->train_set, dp->max_lanes);
197
+		len = dp->max_lanes + 1;
188
198
 	}
189
199
 
190
200
 	ret = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_PATTERN_SET,
..
..
@@ -237,7 +247,7 @@
237
247
 			return -EINVAL;
238
248
 		}
239
249
 
240
-		if (drm_dp_clock_recovery_ok(link_status, dp->link.num_lanes)) {
250
+		if (drm_dp_clock_recovery_ok(link_status, dp->max_lanes)) {
241
251
 			DRM_DEBUG_KMS("clock recovery OK\n");
242
252
 			return 0;
243
253
 		}
..
..
@@ -301,12 +311,12 @@
301
311
 
302
312
 		/* Make sure clock is still ok */
303
313
 		if (!drm_dp_clock_recovery_ok(link_status,
304
-					      dp->link.num_lanes)) {
314
+					      dp->max_lanes)) {
305
315
 			DRM_DEBUG_KMS("Clock recovery check failed\n");
306
316
 			break;
307
317
 		}
308
318
 
309
-		if (drm_dp_channel_eq_ok(link_status,  dp->link.num_lanes)) {
319
+		if (drm_dp_channel_eq_ok(link_status,  dp->max_lanes)) {
310
320
 			DRM_DEBUG_KMS("Channel EQ done\n");
311
321
 			return 0;
312
322
 		}
..
..
@@ -338,17 +348,17 @@
338
348
 
339
349
 static int cdn_dp_get_lower_link_rate(struct cdn_dp_device *dp)
340
350
 {
341
-	switch (dp->link.rate) {
351
+	switch (dp->max_rate) {
342
352
 	case DP_LINK_BW_1_62:
343
353
 		return -EINVAL;
344
354
 	case DP_LINK_BW_2_7:
345
-		dp->link.rate = DP_LINK_BW_1_62;
355
+		dp->max_rate = DP_LINK_BW_1_62;
346
356
 		break;
347
357
 	case DP_LINK_BW_5_4:
348
-		dp->link.rate = DP_LINK_BW_2_7;
358
+		dp->max_rate = DP_LINK_BW_2_7;
349
359
 		break;
350
360
 	default:
351
-		dp->link.rate = DP_LINK_BW_5_4;
361
+		dp->max_rate = DP_LINK_BW_5_4;
352
362
 		break;
353
363
 	}
354
364
 
..
..
@@ -372,12 +382,12 @@
372
382
 
373
383
 	source_max = dp->lanes;
374
384
 	sink_max = drm_dp_max_lane_count(dp->dpcd);
375
-	dp->link.num_lanes = min(source_max, sink_max);
385
+	dp->max_lanes = min(source_max, sink_max);
376
386
 
377
387
 	source_max = drm_dp_bw_code_to_link_rate(CDN_DP_MAX_LINK_RATE);
378
388
 	sink_max = drm_dp_max_link_rate(dp->dpcd);
379
389
 	rate = min(source_max, sink_max);
380
-	dp->link.rate = drm_dp_link_rate_to_bw_code(rate);
390
+	dp->max_rate = drm_dp_link_rate_to_bw_code(rate);
381
391
 
382
392
 	ssc_on = !!(dp->dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5);
383
393
 	link_config[0] = ssc_on ? DP_SPREAD_AMP_0_5 : 0;
..
..
@@ -387,23 +397,21 @@
387
397
 	drm_dp_dpcd_write(&dp->aux, DP_DOWNSPREAD_CTRL, link_config, 2);
388
398
 
389
399
 	while (true) {
390
-		ret = tcphy_dp_set_link_rate(port->phy,
391
-				drm_dp_bw_code_to_link_rate(dp->link.rate),
392
-				ssc_on);
393
-		if (ret) {
394
-			DRM_ERROR("failed to set link rate: %d\n", ret);
395
-			return ret;
396
-		}
400
+		union phy_configure_opts phy_cfg = {0};
397
401
 
398
-		ret = tcphy_dp_set_lane_count(port->phy, dp->link.num_lanes);
399
-		if (ret) {
400
-			DRM_ERROR("failed to set lane count: %d\n", ret);
402
+		phy_cfg.dp.lanes = dp->max_lanes;
403
+		phy_cfg.dp.link_rate = drm_dp_bw_code_to_link_rate(dp->max_rate) / 100;
404
+		phy_cfg.dp.ssc = ssc_on;
405
+		phy_cfg.dp.set_lanes = true;
406
+		phy_cfg.dp.set_rate = true;
407
+		phy_cfg.dp.set_voltages = false;
408
+		ret = phy_configure(port->phy, &phy_cfg);
409
+		if (ret)
401
410
 			return ret;
402
-		}
403
411
 
404
412
 		/* Write the link configuration data */
405
-		link_config[0] = dp->link.rate;
406
-		link_config[1] = dp->link.num_lanes;
413
+		link_config[0] = dp->max_rate;
414
+		link_config[1] = dp->max_lanes;
407
415
 		if (drm_dp_enhanced_frame_cap(dp->dpcd))
408
416
 			link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
409
417
 		drm_dp_dpcd_write(&dp->aux, DP_LINK_BW_SET, link_config, 2);