forked from ~ljy/RK356X_SDK_RELEASE
blame | history | patch | commit | commitdiff
hc
2024-05-10 10ebd8556b7990499c896a550e3d416b444211e6 
 kernel/arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtsi
....@@ -8,21 +8,12 @@
88 
99 #include <dt-bindings/gpio/gpio.h>
1010 #include <dt-bindings/pinctrl/rockchip.h>
11
-#include <dt-bindings/display/media-bus-format.h>
1211 #include "rk3568.dtsi"
1312 #include "rk3568-evb.dtsi"
1413 
1514 / {
1615 	model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
1716 	compatible = "rockchip,rk3568-evb1-ddr4-v10", "rockchip,rk3568";
18
-
19
-	rk_headset: rk-headset {
20
-		compatible = "rockchip_headset";
21
-		headset_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
22
-		spk_ctl_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;//AMP_SD_GPIO4_C2_3V3
23
-		pinctrl-names = "default";
24
-		pinctrl-0 = <&hp_det>;
25
-	};
2617 
2718 	vcc2v5_sys: vcc2v5-ddr {
2819 		compatible = "regulator-fixed";
....@@ -84,7 +75,7 @@
8475 		regulator-max-microvolt = <3300000>;
8576 		vin-supply = <&vcc5v0_sys>;
8677 	};
87
-#if 0
78
+
8879 	vcc_camera: vcc-camera-regulator {
8980 		compatible = "regulator-fixed";
9081 		gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
....@@ -94,174 +85,7 @@
9485 		enable-active-high;
9586 		regulator-always-on;
9687 		regulator-boot-on;
97
-    	};
98
-#endif
99
-	ndj_io_init {
100
-         	compatible = "nk_io_control";	
101
-			pinctrl-names = "default";
102
-        	pinctrl-0 = <&nk_io_gpio>;
103
-			
104
-			//gpio_op0 = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
105
-			
106
-			vcc_5v {
107
-				gpio_num = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
108
-				gpio_function = <0>;	
109
-			};
110
-			
111
-			vcc_12v {
112
-				gpio_num = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;  //VCC12_IO_EN_GPIO0_C7_3V3
113
-				gpio_function = <0>;
114
-			};
115
-			
116
-			hub_host2_rst {
117
-				gpio_num = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;  //HUB_RST_GPIO4_D2_3V3
118
-				gpio_function = <3>;
119
-			};
120
-			
121
-			hub_host3 {
122
-				gpio_num = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
123
-				gpio_function = <0>;
124
-			};
125
-			
126
-			wake_4g {
127
-				gpio_num = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; //4G_WAKEUP_GPIO01_B1_3V3
128
-				gpio_function = <0>;
129
-			};
130
-			
131
-			air_mode_4g {
132
-				gpio_num = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; //4G_AIR_MODE_GPIO01_B0_3V3
133
-				gpio_function = <0>;
134
-			};
135
-			
136
-			reset_4g {
137
-				gpio_num = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>; //4G_RST_GPIO01_B2_3V3
138
-				gpio_function = <3>;
139
-			};
140
-			
141
-			en_4g {
142
-				gpio_num = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
143
-				gpio_function = <0>;
144
-			};
145
-			
146
-			hp_en {
147
-				gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
148
-				gpio_function = <0>;
149
-			};
150
-			
151
-			usb_ogt {
152
-				gpio_num = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; //OTG_EN_OC_GPIO0_C2
153
-				gpio_function = <0>;
154
-			};
155
-			
156
-			m2_wifi_pwr {
157
-				gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;//WIFI_PWREN_GPIO3_C6_1V8
158
-				gpio_function = <0>;
159
-			};
160
-			
161
-			 
162
-	#if 0		
163
-			do1 {
164
-				gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>; 
165
-				gpio_function = <0>;
166
-			};
167
-			
168
-			do2 {
169
-				gpio_num = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
170
-				gpio_function = <0>;
171
-			};
172
-			
173
-			do3 {
174
-				gpio_num = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
175
-				gpio_function = <0>;
176
-			};
177
-			
178
-			do4 {
179
-				gpio_num = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
180
-				gpio_function = <0>;
181
-			};
182
-			
183
-			do5 {
184
-				gpio_num = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>; 
185
-				gpio_function = <0>;
186
-			};
187
-			
188
-			do6 {
189
-				gpio_num = <&gpio2 RK_PD7 GPIO_ACTIVE_LOW>; 
190
-				gpio_function = <0>;
191
-			};
192
-			
193
-			do7 {
194
-				gpio_num = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>; 
195
-				gpio_function = <0>;
196
-			};
197
-			
198
-			di1 {
199
-				gpio_num = <&gpio2 RK_PD5 GPIO_ACTIVE_HIGH>;
200
-				gpio_function = <1>;
201
-			};
202
-	#endif
203
-		};
204
-#if 0			
205
-	    nk_io_init {
206
-                compatible = "nk_io_control";
207
-//				vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
208
-                hub_host2_5V_rest_gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
209
-                hub_host3_5v_gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
210
-                vcc_5v_io = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;   //VCC5_IO_EN_GPIO1_A4_3V3
211
-                vcc_12v_io = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
212
-                en_4g_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
213
-                reset_4g_gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; //4G_RST_GPIO01_B2_3V3
214
-                air_mode_4g_gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; //4G_AIR_MODE_GPIO01_B0_3V3
215
-                wake_4g_gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; //4G_WAKEUP_GPIO01_B1_3V3
216
-				hp_en_gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
217
-//              spk_out_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;//AMP_SD_GPIO4_C2_3V3			
218
-				wifi_power_en_gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
219
-//				pcie_power_en_gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;//PCIE_PWREN_H_GPIO0_D4				
220
-				pinctrl-names = "default";
221
-				pinctrl-0 = <&nk_io_gpio>;				
222
-        };
223
-#endif	
224
-		panel: panel {
225
-				compatible = "simple-panel";
226
-				backlight = <&backlight>;
227
-				power-supply = <&vcc3v3_lcd0_n>;
228
-				enable-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; //LCD0_VDD_H_GPIO2_D4				
229
-				edp-bl-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;  //LCD0_PWBLK_H_GPIO0_B7
230
-				edp-bl-en = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
231
-				bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
232
-				bpc = <8>;
233
-				prepare-delay-ms = <200>;
234
-				enable-delay-ms = <20>;
235
-				lvds-gpio0 = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; //7511_GPIO0-GPIO3_D2 
236
-				lvds-gpio1 = <&gpio3 RK_PD3 GPIO_ACTIVE_HIGH>; //7511_GPIO1-GPIO3_D3 
237
-				lvds-gpio2 = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; //7511_GPIO2-GPIO3_D4 
238
-				lvds-gpio3 = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; //7511_GPIO3-GPIO3_D5
239
-				nodka-lvds = <15>;
240
-
241
-				display-timings {
242
-                native-mode = <&timing>;
243
-                timing: timing {
244
-					clock-frequency = <72500000>;
245
-					hactive = <1280>;
246
-					vactive = <800>;
247
-					hfront-porch = <70>;
248
-					hsync-len = <2>;
249
-					hback-porch = <88>;
250
-					vfront-porch = <7>;
251
-					vsync-len = <4>;
252
-					vback-porch = <17>;
253
-					hsync-active = <21>;
254
-					vsync-active = <0>;
255
-					de-active = <0>;
256
-					pixelclk-active = <0>;			
257
-					};
258
-				};
259
-				port {
260
-					panel_in_lvds: endpoint {
261
-					remote-endpoint = <&lvds_out>;
262
-						};
263
-					};   
264
-				};
88
+	};
26589 };
26690 
26791 &combphy0_us {
....@@ -277,11 +101,11 @@
277101 };
278102 
279103 &csi2_dphy_hw {
280
-	status = "disabled";
104
+	status = "okay";
281105 };
282106 
283107 &csi2_dphy0 {
284
-	status = "disabled";
108
+	status = "okay";
285109 
286110 	ports {
287111 		#address-cells = <1>;
....@@ -324,12 +148,8 @@
324148  * video_phy0 needs to be enabled
325149  * when dsi0 is enabled
326150  */
327
-&video_phy0 {
328
-	status = "disabled";
329
-};
330
-
331151 &dsi0 {
332
-	status = "disabled";
152
+	status = "okay";
333153 };
334154 
335155 &dsi0_in_vp0 {
....@@ -337,7 +157,7 @@
337157 };
338158 
339159 &dsi0_in_vp1 {
340
-	status = "disabled";
160
+	status = "okay";
341161 };
342162 
343163 &dsi0_panel {
....@@ -365,30 +185,7 @@
365185 };
366186 
367187 &edp {
368
-	//hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;	
369
-    force-hpd;
370
-    status = "disabled";
371
-};
372
-
373
-&lvds {
374
-    status = "disabled";
375
-    ports {
376
-        port@1 {
377
-            reg = <1>;
378
-            lvds_out: endpoint {
379
-                remote-endpoint = <&panel_in_lvds>;
380
-            };
381
-        };
382
-   
383
-	};
384
-};
385
-
386
-&route_lvds{
387
-	 status = "disabled";
388
-	 connect = <&vp2_out_lvds>;
389
-};
390
-
391
-&lvds_in_vp2 {
188
+	hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
392189 	status = "okay";
393190 };
394191 
....@@ -397,65 +194,18 @@
397194 };
398195 
399196 &edp_in_vp0 {
400
-    status = "disabled";
197
+	status = "okay";
401198 };
402199 
403200 &edp_in_vp1 {
404
-    status = "okay";
405
-
406
-};
407
-
408
-&route_edp {
409
-    status = "okay";
410
-    connect = <&vp1_out_edp>;
411
-};
412
-
413
-
414
-/*
415
-*  edp_end
416
-*/
417
-
418
-/*
419
-*  Hdmi_start
420
-*/
421
-
422
-&hdmi {
423
-	status = "okay";
424
-	rockchip,phy-table =
425
-		<92812500  0x8009 0x0000 0x0270>,
426
-		<165000000 0x800b 0x0000 0x026d>,
427
-		<185625000 0x800b 0x0000 0x01ed>,
428
-		<297000000 0x800b 0x0000 0x01ad>,
429
-		<594000000 0x8029 0x0000 0x0088>,
430
-		<000000000 0x0000 0x0000 0x0000>;
431
-};
432
-
433
-&route_hdmi {
434
-	status = "okay";
435
-	connect = <&vp0_out_hdmi>;
436
-};
437
-
438
-&hdmi_in_vp0 {
439
-	status = "okay";
440
-};
441
-
442
-&hdmi_in_vp1 {
443201 	status = "disabled";
444202 };
445
-
446
-&hdmi_sound {
447
-	status = "okay";
448
-};
449
-
450
-/*
451
- *  Hdmi_END
452
-*/
453203 
454204 &gmac0 {
455205 	phy-mode = "rgmii";
456206 	clock_in_out = "output";
457207 
458
-	snps,reset-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
208
+	snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
459209 	snps,reset-active-low;
460210 	/* Reset time is 20ms, 100ms for rtl8211f */
461211 	snps,reset-delays-us = <0 20000 100000>;
....@@ -475,16 +225,14 @@
475225 	rx_delay = <0x2f>;
476226 
477227 	phy-handle = <&rgmii_phy0>;
478
-	
479
-	status = "disabled";
480
-	
228
+	status = "okay";
481229 };
482230 
483231 &gmac1 {
484232 	phy-mode = "rgmii";
485233 	clock_in_out = "output";
486234 
487
-	snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
235
+	snps,reset-gpio = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
488236 	snps,reset-active-low;
489237 	/* Reset time is 20ms, 100ms for rtl8211f */
490238 	snps,reset-delays-us = <0 20000 100000>;
....@@ -511,26 +259,12 @@
511259  * power-supply should switche to vcc3v3_lcd1_n
512260  * when mipi panel is connected to dsi1.
513261  */
514
-
515
-
516
-&i2c3 {
517
-	status = "okay";
518
-       //mac eeprom
519
-        eeprom@51 {
520
-                //compatible = "atmel,24c02";
521
-                compatible = "atmel,24c256";
522
-                reg = <0x51>;
523
-        };
524
-	
525
-	  //nk-mcu
526
-        nkmcu@15 {
527
-                compatible = "nk_mcu";
528
-                reg = <0x15>;
529
-        };
262
+&gt1x {
263
+	power-supply = <&vcc3v3_lcd0_n>;
530264 };
531265 
532266 &i2c4 {
533
-	status = "disabled";
267
+	status = "okay";
534268 	gc8034: gc8034@37 {
535269 		compatible = "galaxycore,gc8034";
536270 		status = "okay";
....@@ -539,6 +273,7 @@
539273 		clock-names = "xvclk";
540274 		pinctrl-names = "default";
541275 		pinctrl-0 = <&cif_clk>;
276
+		power-domains = <&power RK3568_PD_VI>;
542277 		reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
543278 		pwdn-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_LOW>;
544279 		rockchip,grf = <&grf>;
....@@ -575,7 +310,7 @@
575310 		};
576311 	};
577312 	ov5695: ov5695@36 {
578
-		status = "disabled";
313
+		status = "okay";
579314 		compatible = "ovti,ov5695";
580315 		reg = <0x36>;
581316 		clocks = <&cru CLK_CIF_OUT>;
....@@ -595,19 +330,6 @@
595330 				data-lanes = <1 2>;
596331 			};
597332 		};
598
-	};
599
-};
600
-
601
-&i2c5 {
602
-	status = "okay";
603
-
604
-	hym8563: hym8563@51 {
605
-		compatible = "haoyu,hym8563";
606
-		reg = <0x51>;
607
-		#clock-cells = <0>;
608
-		clock-frequency = <32768>;
609
-		clock-output-names = "xin32k";
610
-		/* rtc_int is not connected */
611333 	};
612334 };
613335 
....@@ -644,75 +366,46 @@
644366 };
645367 
646368 &pinctrl {
647
-//	cam {
648
-//		camera_pwr: camera-pwr {
649
-//			rockchip,pins =
650
-//				/* camera power en */
651
-//				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
652
-//		};
653
-//	};
369
+	cam {
370
+		camera_pwr: camera-pwr {
371
+			rockchip,pins =
372
+				/* camera power en */
373
+				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
374
+		};
375
+	};
654376 	headphone {
655377 		hp_det: hp-det {
656
-			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>,
657
-							<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
378
+			rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
658379 		};
659380 	};
660381 
661382 	wireless-wlan {
662383 		wifi_host_wake_irq: wifi-host-wake-irq {
663
-			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
384
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
664385 		};
665386 	};
666387 
667388 	wireless-bluetooth {
668
-		uart1_gpios: uart1-gpios {
669
-			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
389
+		uart8_gpios: uart8-gpios {
390
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
670391 		};
671392 	};
672
-	
673
-	lcd1 {
674
-        lcd1_rst_gpio: lcd1-rst-gpio {
675
-            rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
676
-        };
677
-    };
678
-		
679
-	nk_io_init{
680
-		nk_io_gpio: nk-io-gpio{
681
-			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
682
-							<0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>,
683
-							<0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>,
684
-							<4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
685
-							<4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
686
-							<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
687
-							<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>,
688
-							<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
689
-							<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
690
-							<1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
691
-							<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
692
-							<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
693
-							<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
694
-							<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
695
-							<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
696
-							<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
697
-							<2 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,//93 SPI2_CS0_M1_3V3
698
-							<2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>,//94 SPI2_MOSI_M1_3V3
699
-							<2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>,//95 SPI2_MISO_M1_3V3
700
-							<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,//96 SPI2_CLK_M1_3V3
701
-							<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
702
-		};
703
-	};
393
+};
394
+
395
+&rk809_sound {
396
+	hp-det-gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
704397 };
705398 
706399 &rkisp {
707
-	status = "disabled";
400
+	status = "okay";
708401 };
709402 
710403 &rkisp_mmu {
711
-	status = "disabled";
404
+	status = "okay";
712405 };
713406 
714407 &rkisp_vir0 {
715
-	status = "disabled";
408
+	status = "okay";
716409 
717410 	port {
718411 		#address-cells = <1>;
....@@ -725,30 +418,35 @@
725418 	};
726419 };
727420 
421
+&route_dsi0 {
422
+	status = "okay";
423
+	connect = <&vp1_out_dsi0>;
424
+};
728425 
426
+&route_edp {
427
+	status = "okay";
428
+	connect = <&vp0_out_edp>;
429
+};
729430 
730431 &sata2 {
731432 	status = "okay";
732433 };
733434 
734435 &sdmmc2 {
735
-        status = "disabled";
736
-};
737
-
738
-&sdmmc1 {
739
-        max-frequency = <150000000>;
740
-        supports-sdio;
741
-        bus-width = <4>;
742
-        disable-wp;
743
-        cap-sd-highspeed;
744
-        cap-sdio-irq;
745
-        keep-power-in-suspend;
746
-        mmc-pwrseq = <&sdio_pwrseq>;
747
-        non-removable;
748
-        pinctrl-names = "default";
749
-        pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
750
-        sd-uhs-sdr104;
751
-        status = "okay";
436
+	max-frequency = <150000000>;
437
+	no-sd;
438
+	no-mmc;
439
+	bus-width = <4>;
440
+	disable-wp;
441
+	cap-sd-highspeed;
442
+	cap-sdio-irq;
443
+	keep-power-in-suspend;
444
+	mmc-pwrseq = <&sdio_pwrseq>;
445
+	non-removable;
446
+	pinctrl-names = "default";
447
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
448
+	sd-uhs-sdr104;
449
+	status = "okay";
752450 };
753451 
754452 &spdif_8ch {
....@@ -758,25 +456,25 @@
758456 };
759457 
760458 &uart8 {
761
-	status = "disabled";
459
+	status = "okay";
762460 	pinctrl-names = "default";
763461 	pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
764462 };
765463 
766464 &vcc3v3_lcd0_n {
767
-	gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; 
465
+	gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
768466 	enable-active-high;
769467 };
770468 
771469 &vcc3v3_lcd1_n {
772
-	gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; //MIPI_3V3EN_GPIO3_A3_d_3V3
470
+	gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
773471 	enable-active-high;
774472 };
775473 
776474 &wireless_wlan {
777475 	pinctrl-names = "default";
778476 	pinctrl-0 = <&wifi_host_wake_irq>;
779
-	WIFI,host_wake_irq = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
477
+	WIFI,host_wake_irq = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
780478 };
781479 
782480 &wireless_bluetooth {
....@@ -784,47 +482,12 @@
784482 	clocks = <&rk809 1>;
785483 	clock-names = "ext_clock";
786484 	//wifi-bt-power-toggle;
787
-	uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
485
+	uart_rts_gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
788486 	pinctrl-names = "default", "rts_gpio";
789
-	pinctrl-0 = <&uart1m0_rtsn>;
790
-	pinctrl-1 = <&uart1_gpios>;
791
-	BT,reset_gpio    = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
792
-    BT,wake_gpio     = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
793
-    BT,wake_host_irq = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
487
+	pinctrl-0 = <&uart8m0_rtsn>;
488
+	pinctrl-1 = <&uart8_gpios>;
489
+	BT,reset_gpio    = <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;
490
+	BT,wake_gpio     = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
491
+	BT,wake_host_irq = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
794492 	status = "okay";
795
-};
796
-
797
-&uart0 {
798
-	status = "disabled";
799
-};
800
-
801
-&uart1 {	
802
-	pinctrl-names = "default";	
803
-	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;	
804
-	status = "disabled";		
805
-};
806
-
807
-&uart3 {
808
-	status = "okay";
809
-	pinctrl-0 = <&uart3m1_xfer>;
810
-};
811
-
812
-&uart4 {
813
-	status = "okay";
814
-	pinctrl-0 = <&uart4m1_xfer>;
815
-};
816
-
817
-&uart5 {
818
-	status = "okay";
819
-	pinctrl-0 = <&uart5m1_xfer>;
820
-};
821
-
822
-&uart7 {
823
-	status = "disabled";
824
-	pinctrl-0 = <&uart7m1_xfer>;
825
-};
826
-
827
-&uart9 {
828
-	status = "disabled";
829
-	pinctrl-0 = <&uart9m1_xfer>;
830493 };