add new system file

hc

2024-02-20 102a0743326a03cd1a1202ceda21e175b7d3575c

 kernel/drivers/spi/spi-rockchip-test.c
..
..
@@ -7,33 +7,6 @@
7
7
  * GNU General Public License for more details.
8
8
  */
9
9
 
10
-/* dts config
11
-&spi0 {
12
-	status = "okay";
13
-	max-freq = <48000000>;   //spi internal clk, don't modify
14
-	//dma-names = "tx", "rx";   //enable dma
15
-	pinctrl-names = "default";  //pinctrl according to you board
16
-	pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0 &spi0_cs1>;
17
-	spi_test@00 {
18
-		compatible = "rockchip,spi_test_bus0_cs0";
19
-		reg = <0>;   //chip select  0:cs0  1:cs1
20
-		id = <0>;
21
-		spi-max-frequency = <24000000>;   //spi output clock
22
-		//spi-cpha;      not support
23
-		//spi-cpol; 	//if the property is here it is 1:clk is high, else 0:clk is low  when idle
24
-	};
25
-
26
-	spi_test@01 {
27
-		compatible = "rockchip,spi_test_bus0_cs1";
28
-		reg = <1>;
29
-		id = <1>;
30
-		spi-max-frequency = <24000000>;
31
-		spi-cpha;
32
-		spi-cpol;
33
-	};
34
-};
35
-*/
36
-
37
10
 /* how to test spi
38
11
 * echo write 0 10 255 > /dev/spi_misc_test
39
12
 * echo write 0 10 255 init.rc > /dev/spi_misc_test
..
..
@@ -50,7 +23,6 @@
50
23
 #include <linux/interrupt.h>
51
24
 #include <linux/delay.h>
52
25
 #include <linux/clk.h>
53
-#include <linux/fs.h>
54
26
 #include <linux/dma-mapping.h>
55
27
 #include <linux/dmaengine.h>
56
28
 #include <linux/platform_device.h>
..
..
@@ -65,7 +37,7 @@
65
37
 #include <linux/uaccess.h>
66
38
 #include <linux/syscalls.h>
67
39
 
68
-#define MAX_SPI_DEV_NUM 8
40
+#define MAX_SPI_DEV_NUM 10
69
41
 #define SPI_MAX_SPEED_HZ	12000000
70
42
 
71
43
 struct spi_test_data {
..
..
@@ -138,8 +110,8 @@
138
110
 	return ret;
139
111
 }
140
112
 
141
-int spi_write_then_read_slt(int id, const void *txbuf, unsigned n_tx,
142
-		void *rxbuf, unsigned n_rx)
113
+int spi_write_then_read_slt(int id, const void *txbuf, unsigned int n_tx,
114
+		void *rxbuf, unsigned int n_rx)
143
115
 {
144
116
 	int ret = -1;
145
117
 	struct spi_device *spi = NULL;
..
..
@@ -233,17 +205,9 @@
233
205
 		}
234
206
 		spi->max_speed_hz = val;
235
207
 	} else if (!strcmp(cmd, "write")) {
236
-		char name[64];
237
-		int fd;
238
-		mm_segment_t old_fs = get_fs();
239
-
240
208
 		sscanf(argv[0], "%d", &id);
241
209
 		sscanf(argv[1], "%d", &times);
242
210
 		sscanf(argv[2], "%d", &size);
243
-		if (argc > 3) {
244
-			sscanf(argv[3], "%s", name);
245
-			set_fs(KERNEL_DS);
246
-		}
247
211
 
248
212
 		txbuf = kzalloc(size, GFP_KERNEL);
249
213
 		if (!txbuf) {
..
..
@@ -251,19 +215,8 @@
251
215
 			return n;
252
216
 		}
253
217
 
254
-		if (argc > 3) {
255
-			fd = ksys_open(name, O_RDONLY, 0);
256
-			if (fd < 0) {
257
-				printk("open %s fail\n", name);
258
-			} else {
259
-				ksys_read(fd, (char __user *)txbuf, size);
260
-				ksys_close(fd);
261
-			}
262
-			set_fs(old_fs);
263
-		} else {
264
-			for (i = 0; i < size; i++)
265
-				txbuf[i] = i % 256;
266
-		}
218
+		for (i = 0; i < size; i++)
219
+			txbuf[i] = i % 256;
267
220
 
268
221
 		start_time = ktime_get();
269
222
 		for (i = 0; i < times; i++)
..
..
@@ -348,14 +301,21 @@
348
301
 		kfree(txbuf);
349
302
 		kfree(rxbuf);
350
303
 	} else if (!strcmp(cmd, "config")) {
351
-		int width;
304
+		int width, mode;
352
305
 
353
-		sscanf(argv[0], "%d", &width);
306
+		sscanf(argv[0], "%d", &id);
307
+		sscanf(argv[1], "%d", &width);
308
+		sscanf(argv[2], "mode=0x%x", &mode);
354
309
 
355
310
 		if (width == 16)
356
311
 			bit_per_word = 16;
357
312
 		else
358
313
 			bit_per_word = 8;
314
+
315
+		if (mode) {
316
+			g_spi_test_data[id]->spi->mode = mode;
317
+			spi_setup(g_spi_test_data[id]->spi);
318
+		}
359
319
 	} else {
360
320
 		printk("echo id number size > /dev/spi_misc_test\n");
361
321
 		printk("echo write 0 10 255 > /dev/spi_misc_test\n");
..
..
@@ -363,7 +323,7 @@
363
323
 		printk("echo read 0 10 255 > /dev/spi_misc_test\n");
364
324
 		printk("echo loop 0 10 255 > /dev/spi_misc_test\n");
365
325
 		printk("echo setspeed 0 1000000 > /dev/spi_misc_test\n");
366
-		printk("echo config 8 > /dev/spi_misc_test\n");
326
+		printk("echo config 0 8 mode=0xb > /dev/spi_misc_test\n");
367
327
 	}
368
328
 
369
329
 	return n;
..
..
@@ -388,9 +348,6 @@
388
348
 	if (!spi)
389
349
 		return -ENOMEM;
390
350
 
391
-	if (!spi->dev.of_node)
392
-		return -ENOMEM;
393
-
394
351
 	spi_test_data = (struct spi_test_data *)kzalloc(sizeof(struct spi_test_data), GFP_KERNEL);
395
352
 	if (!spi_test_data) {
396
353
 		dev_err(&spi->dev, "ERR: no memory for spi_test_data\n");
..
..
@@ -407,7 +364,7 @@
407
364
 		return -1;
408
365
 	}
409
366
 
410
-	if (of_property_read_u32(spi->dev.of_node, "id", &id)) {
367
+	if (device_property_read_u32(&spi->dev, "id", &id)) {
411
368
 		dev_warn(&spi->dev, "fail to get id, default set 0\n");
412
369
 		id = 0;
413
370
 	}