add new system file

hc

2024-02-20 102a0743326a03cd1a1202ceda21e175b7d3575c

 kernel/arch/arm/boot/dts/uniphier-pro4.dtsi
..
..
@@ -59,7 +59,7 @@
59
59
 		ranges;
60
60
 		interrupt-parent = <&intc>;
61
61
 
62
-		l2: l2-cache@500c0000 {
62
+		l2: cache-controller@500c0000 {
63
63
 			compatible = "socionext,uniphier-system-cache";
64
64
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
65
65
 			      <0x506c0000 0x400>;
..
..
@@ -69,6 +69,19 @@
69
69
 			cache-sets = <256>;
70
70
 			cache-line-size = <128>;
71
71
 			cache-level = <2>;
72
+		};
73
+
74
+		spi0: spi@54006000 {
75
+			compatible = "socionext,uniphier-scssi";
76
+			status = "disabled";
77
+			reg = <0x54006000 0x100>;
78
+			#address-cells = <1>;
79
+			#size-cells = <0>;
80
+			interrupts = <0 39 4>;
81
+			pinctrl-names = "default";
82
+			pinctrl-0 = <&pinctrl_spi0>;
83
+			clocks = <&peri_clk 11>;
84
+			resets = <&peri_rst 11>;
72
85
 		};
73
86
 
74
87
 		serial0: serial@54006800 {
..
..
@@ -258,6 +271,70 @@
258
271
 			};
259
272
 		};
260
273
 
274
+		dmac: dma-controller@5a000000 {
275
+			compatible = "socionext,uniphier-mio-dmac";
276
+			reg = <0x5a000000 0x1000>;
277
+			interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
278
+				     <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
279
+			clocks = <&mio_clk 7>;
280
+			resets = <&mio_rst 7>;
281
+			#dma-cells = <1>;
282
+		};
283
+
284
+		sd: mmc@5a400000 {
285
+			compatible = "socionext,uniphier-sd-v2.91";
286
+			status = "disabled";
287
+			reg = <0x5a400000 0x200>;
288
+			interrupts = <0 76 4>;
289
+			pinctrl-names = "default", "uhs";
290
+			pinctrl-0 = <&pinctrl_sd>;
291
+			pinctrl-1 = <&pinctrl_sd_uhs>;
292
+			clocks = <&mio_clk 0>;
293
+			reset-names = "host", "bridge";
294
+			resets = <&mio_rst 0>, <&mio_rst 3>;
295
+			dma-names = "rx-tx";
296
+			dmas = <&dmac 4>;
297
+			bus-width = <4>;
298
+			cap-sd-highspeed;
299
+			sd-uhs-sdr12;
300
+			sd-uhs-sdr25;
301
+			sd-uhs-sdr50;
302
+		};
303
+
304
+		emmc: mmc@5a500000 {
305
+			compatible = "socionext,uniphier-sd-v2.91";
306
+			status = "disabled";
307
+			reg = <0x5a500000 0x200>;
308
+			interrupts = <0 78 4>;
309
+			pinctrl-names = "default";
310
+			pinctrl-0 = <&pinctrl_emmc>;
311
+			clocks = <&mio_clk 1>;
312
+			reset-names = "host", "bridge", "hw";
313
+			resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
314
+			dma-names = "rx-tx";
315
+			dmas = <&dmac 5>;
316
+			bus-width = <8>;
317
+			cap-mmc-highspeed;
318
+			cap-mmc-hw-reset;
319
+			non-removable;
320
+		};
321
+
322
+		sd1: mmc@5a600000 {
323
+			compatible = "socionext,uniphier-sd-v2.91";
324
+			status = "disabled";
325
+			reg = <0x5a600000 0x200>;
326
+			interrupts = <0 85 4>;
327
+			pinctrl-names = "default";
328
+			pinctrl-0 = <&pinctrl_sd1>;
329
+			clocks = <&mio_clk 2>;
330
+			reset-names = "host", "bridge";
331
+			resets = <&mio_rst 2>, <&mio_rst 5>;
332
+			dma-names = "rx-tx";
333
+			dmas = <&dmac 6>;
334
+			bus-width = <4>;
335
+			cap-sd-highspeed;
336
+		};
337
+
261
338
 		usb2: usb@5a800100 {
262
339
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
263
340
 			status = "disabled";
..
..
@@ -269,6 +346,8 @@
269
346
 				 <&mio_clk 12>;
270
347
 			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
271
348
 				 <&mio_rst 12>;
349
+			phy-names = "usb";
350
+			phys = <&usb_phy0>;
272
351
 			has-transaction-translator;
273
352
 		};
274
353
 
..
..
@@ -283,6 +362,8 @@
283
362
 				 <&mio_clk 13>;
284
363
 			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
285
364
 				 <&mio_rst 13>;
365
+			phy-names = "usb";
366
+			phys = <&usb_phy1>;
286
367
 			has-transaction-translator;
287
368
 		};
288
369
 
..
..
@@ -293,6 +374,34 @@
293
374
 
294
375
 			pinctrl: pinctrl {
295
376
 				compatible = "socionext,uniphier-pro4-pinctrl";
377
+			};
378
+
379
+			usb-phy {
380
+				compatible = "socionext,uniphier-pro4-usb2-phy";
381
+				#address-cells = <1>;
382
+				#size-cells = <0>;
383
+
384
+				usb_phy0: phy@0 {
385
+					reg = <0>;
386
+					#phy-cells = <0>;
387
+				};
388
+
389
+				usb_phy1: phy@1 {
390
+					reg = <1>;
391
+					#phy-cells = <0>;
392
+				};
393
+
394
+				usb_phy2: phy@2 {
395
+					reg = <2>;
396
+					#phy-cells = <0>;
397
+					vbus-supply = <&usb0_vbus>;
398
+				};
399
+
400
+				usb_phy3: phy@3 {
401
+					reg = <3>;
402
+					#phy-cells = <0>;
403
+					vbus-supply = <&usb1_vbus>;
404
+				};
296
405
 			};
297
406
 		};
298
407
 
..
..
@@ -319,7 +428,15 @@
319
428
 			};
320
429
 		};
321
430
 
322
-		aidet: aidet@5fc20000 {
431
+		xdmac: dma-controller@5fc10000 {
432
+			compatible = "socionext,uniphier-xdmac";
433
+			reg = <0x5fc10000 0x5300>;
434
+			interrupts = <0 188 4>;
435
+			dma-channels = <16>;
436
+			#dma-cells = <2>;
437
+		};
438
+
439
+		aidet: interrupt-controller@5fc20000 {
323
440
 			compatible = "socionext,uniphier-pro4-aidet";
324
441
 			reg = <0x5fc20000 0x200>;
325
442
 			interrupt-controller;
..
..
@@ -386,16 +503,115 @@
386
503
 			};
387
504
 		};
388
505
 
389
-		nand: nand@68000000 {
506
+		usb0: usb@65a00000 {
507
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
508
+			status = "disabled";
509
+			reg = <0x65a00000 0xcd00>;
510
+			interrupt-names = "host", "peripheral";
511
+			interrupts = <0 134 4>, <0 135 4>;
512
+			pinctrl-names = "default";
513
+			pinctrl-0 = <&pinctrl_usb0>;
514
+			clock-names = "ref", "bus_early", "suspend";
515
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
516
+			resets = <&usb0_rst 4>;
517
+			phys = <&usb_phy2>, <&usb0_ssphy>;
518
+			dr_mode = "host";
519
+		};
520
+
521
+		usb-glue@65b00000 {
522
+			compatible = "socionext,uniphier-pro4-dwc3-glue",
523
+				     "simple-mfd";
524
+			#address-cells = <1>;
525
+			#size-cells = <1>;
526
+			ranges = <0 0x65b00000 0x100>;
527
+
528
+			usb0_vbus: regulator@0 {
529
+				compatible = "socionext,uniphier-pro4-usb3-regulator";
530
+				reg = <0 0x10>;
531
+				clock-names = "gio", "link";
532
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
533
+				reset-names = "gio", "link";
534
+				resets = <&sys_rst 12>, <&sys_rst 14>;
535
+			};
536
+
537
+			usb0_ssphy: ss-phy@10 {
538
+				compatible = "socionext,uniphier-pro4-usb3-ssphy";
539
+				reg = <0x10 0x10>;
540
+				#phy-cells = <0>;
541
+				clock-names = "gio", "link";
542
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
543
+				reset-names = "gio", "link";
544
+				resets = <&sys_rst 12>, <&sys_rst 14>;
545
+				vbus-supply = <&usb0_vbus>;
546
+			};
547
+
548
+			usb0_rst: reset@40 {
549
+				compatible = "socionext,uniphier-pro4-usb3-reset";
550
+				reg = <0x40 0x4>;
551
+				#reset-cells = <1>;
552
+				clock-names = "gio", "link";
553
+				clocks = <&sys_clk 12>, <&sys_clk 14>;
554
+				reset-names = "gio", "link";
555
+				resets = <&sys_rst 12>, <&sys_rst 14>;
556
+			};
557
+		};
558
+
559
+		usb1: usb@65c00000 {
560
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
561
+			status = "disabled";
562
+			reg = <0x65c00000 0xcd00>;
563
+			interrupt-names = "host", "peripheral";
564
+			interrupts = <0 137 4>, <0 138 4>;
565
+			pinctrl-names = "default";
566
+			pinctrl-0 = <&pinctrl_usb1>;
567
+			clock-names = "ref", "bus_early", "suspend";
568
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
569
+			resets = <&usb1_rst 4>;
570
+			phys = <&usb_phy3>;
571
+			dr_mode = "host";
572
+		};
573
+
574
+		usb-glue@65d00000 {
575
+			compatible = "socionext,uniphier-pro4-dwc3-glue",
576
+				     "simple-mfd";
577
+			#address-cells = <1>;
578
+			#size-cells = <1>;
579
+			ranges = <0 0x65d00000 0x100>;
580
+
581
+			usb1_vbus: regulator@0 {
582
+				compatible = "socionext,uniphier-pro4-usb3-regulator";
583
+				reg = <0 0x10>;
584
+				clock-names = "gio", "link";
585
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
586
+				reset-names = "gio", "link";
587
+				resets = <&sys_rst 12>, <&sys_rst 15>;
588
+			};
589
+
590
+			usb1_rst: reset@40 {
591
+				compatible = "socionext,uniphier-pro4-usb3-reset";
592
+				reg = <0x40 0x4>;
593
+				#reset-cells = <1>;
594
+				clock-names = "gio", "link";
595
+				clocks = <&sys_clk 12>, <&sys_clk 15>;
596
+				reset-names = "gio", "link";
597
+				resets = <&sys_rst 12>, <&sys_rst 15>;
598
+			};
599
+		};
600
+
601
+		nand: nand-controller@68000000 {
390
602
 			compatible = "socionext,uniphier-denali-nand-v5a";
391
603
 			status = "disabled";
392
604
 			reg-names = "nand_data", "denali_reg";
393
605
 			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
606
+			#address-cells = <1>;
607
+			#size-cells = <0>;
394
608
 			interrupts = <0 65 4>;
395
609
 			pinctrl-names = "default";
396
610
 			pinctrl-0 = <&pinctrl_nand>;
397
-			clocks = <&sys_clk 2>;
398
-			resets = <&sys_rst 2>;
611
+			clock-names = "nand", "nand_x", "ecc";
612
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
613
+			reset-names = "nand", "reg";
614
+			resets = <&sys_rst 2>, <&sys_rst 2>;
399
615
 		};
400
616
 	};
401
617
 };