~hc/RK356X_SDK_RELEASE.git

..	..	@@ -8,19 +8,13 @@
8	8
9	9	#include <dt-bindings/gpio/gpio.h>
10	10	#include <dt-bindings/pinctrl/rockchip.h>
	11	+#include <dt-bindings/display/media-bus-format.h>
11	12	#include "rk3568.dtsi"
12	13	#include "rk3568-evb.dtsi"
13	14
14	15	/ {
15	16	model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
16	17	compatible = "rockchip,rk3568-evb1-ddr4-v10", "rockchip,rk3568";
17		-
18		- rk_headset: rk-headset {
19		- compatible = "rockchip_headset";
20		- headset_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
21		- pinctrl-names = "default";
22		- pinctrl-0 = <&hp_det>;
23		- };
24	18
25	19	vcc2v5_sys: vcc2v5-ddr {
26	20	compatible = "regulator-fixed";
..	..	@@ -32,6 +26,15 @@
32	26	vin-supply = <&vcc3v3_sys>;
33	27	};
34	28
	29	+ vcc3v3_vga: vcc3v3-vga {
	30	+ compatible = "regulator-fixed";
	31	+ regulator-name = "vcc3v3_vga";
	32	+ regulator-always-on;
	33	+ regulator-boot-on;
	34	+ gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
	35	+ enable-active-high;
	36	+ vin-supply = <&vcc3v3_sys>;
	37	+ };
35	38
36	39	pcie30_avdd0v9: pcie30-avdd0v9 {
37	40	compatible = "regulator-fixed";
..	..	@@ -83,42 +86,144 @@
83	86	enable-active-high;
84	87	regulator-always-on;
85	88	regulator-boot-on;
86		- };
	89	+ };
87	90	#endif
88	91
89		- nk_io_init {
90		- compatible = "nk_io_control";
91		-// usb_en_oc_gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; //USB_EN_OC_GPIO0_A5
92		- lcd_bk_en_gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
93		- lcd_pwblk_gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
94		- vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
95		- hub_host2_5V_rest_gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
96		- hub_host3_5v_gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
97		-// hub_host3_5V_rest_gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
98		- vcc_5v_io = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
99		- vcc_12v_io = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
100		- en_4g_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
101		- reset_4g_gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; //4G_RST_GPIO01_B2_3V3
102		- air_mode_4g_gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; //4G_AIR_MODE_GPIO01_B0_3V3
103		- wake_4g_gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; //4G_WAKEUP_GPIO01_B1_3V3
104		- hp_en_gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
105		- spk_out_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;//AMP_SD_GPIO4_C2_3V3
106		-
107		- edp_enable_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
108		- edp_gpio0 = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; //7511_GPIO0-GPIO3_D2
109		- edp_gpio1 = <&gpio3 RK_PD3 GPIO_ACTIVE_HIGH>; //7511_GPIO1-GPIO3_D3
110		- edp_gpio2 = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; //7511_GPIO2-GPIO3_D4
111		- edp_gpio3 = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; //7511_GPIO3-GPIO3_D5
112		- edp_reset = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>; //7511_RST_GPIO3_D1
113		-// tp_reset = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
114		-// vddio_mipi = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
115		-
116		- wifi_power_en_gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
	92	+ ndj_io_init {
	93	+ compatible = "nk_io_control";
	94	+ pinctrl-names = "default";
	95	+ pinctrl-0 = <&nk_io_gpio>;
	96	+
	97	+ //gpio_op0 = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
	98	+
	99	+ vcc_5v {
	100	+ gpio_num = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
	101	+ gpio_function = <0>;
	102	+ };
	103	+
	104	+ vcc_12v {
	105	+ gpio_num = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
	106	+ gpio_function = <0>;
	107	+ };
	108	+
	109	+ hub_host2_rst {
	110	+ gpio_num = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
	111	+ gpio_function = <3>;
	112	+ };
	113	+
	114	+ hub_host3 {
	115	+ gpio_num = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
	116	+ gpio_function = <0>;
	117	+ };
	118	+
	119	+ wake_4g {
	120	+ gpio_num = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; //4G_WAKEUP_GPIO01_B1_3V3
	121	+ gpio_function = <0>;
	122	+ };
	123	+
	124	+ air_mode_4g {
	125	+ gpio_num = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; //4G_AIR_MODE_GPIO01_B0_3V3
	126	+ gpio_function = <0>;
	127	+ };
	128	+
	129	+ reset_4g {
	130	+ gpio_num = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>; //4G_RST_GPIO01_B2_3V3
	131	+ gpio_function = <3>;
	132	+ };
	133	+
	134	+ en_4g {
	135	+ gpio_num = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
	136	+ gpio_function = <0>;
	137	+ };
	138	+
	139	+ hp_en {
	140	+ gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
	141	+ gpio_function = <0>;
	142	+ };
	143	+
	144	+ wifi_power_en {
	145	+ gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
	146	+ gpio_function = <0>;
	147	+ };
	148	+ #if 0
	149	+ do1 {
	150	+ gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
	151	+ gpio_function = <0>;
	152	+ };
	153	+
	154	+ do2 {
	155	+ gpio_num = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
	156	+ gpio_function = <0>;
	157	+ };
	158	+
	159	+ do3 {
	160	+ gpio_num = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
	161	+ gpio_function = <0>;
	162	+ };
	163	+
	164	+ do4 {
	165	+ gpio_num = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
	166	+ gpio_function = <0>;
	167	+ };
	168	+
	169	+ do5 {
	170	+ gpio_num = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>;
	171	+ gpio_function = <0>;
	172	+ };
	173	+
	174	+ do6 {
	175	+ gpio_num = <&gpio2 RK_PD7 GPIO_ACTIVE_LOW>;
	176	+ gpio_function = <0>;
	177	+ };
	178	+
	179	+ do7 {
	180	+ gpio_num = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>;
	181	+ gpio_function = <0>;
	182	+ };
	183	+
	184	+ di1 {
	185	+ gpio_num = <&gpio2 RK_PD5 GPIO_ACTIVE_HIGH>;
	186	+ gpio_function = <1>;
	187	+ };
	188	+ #endif
	189	+ };
	190	+
	191	+ panel: panel {
	192	+ compatible = "simple-panel";
	193	+ backlight = <&backlight>;
	194	+ power-supply = <&vcc3v3_lcd1_n>;
	195	+ enable-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; //LCD0_VDD_H_GPIO2_D4
	196	+ edp-bl-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; //LCD0_PWBLK_H_GPIO0_B7
	197	+ edp-bl-en = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
	198	+ bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
	199	+ bpc = <8>;
	200	+ prepare-delay-ms = <200>;
	201	+ enable-delay-ms = <20>;
117	202
118		- pinctrl-names = "default";
119		- pinctrl-0 = <&nk_io_gpio>;
120		- nodka_lvds = <9>;
121		- };
	203	+ display-timings {
	204	+ native-mode = <&timing>;
	205	+ timing: timing {
	206	+ clock-frequency = <72500000>;
	207	+ hactive = <1280>;
	208	+ vactive = <800>;
	209	+ hfront-porch = <70>;
	210	+ hsync-len = <2>;
	211	+ hback-porch = <88>;
	212	+ vfront-porch = <7>;
	213	+ vsync-len = <4>;
	214	+ vback-porch = <17>;
	215	+ hsync-active = <21>;
	216	+ vsync-active = <0>;
	217	+ de-active = <0>;
	218	+ pixelclk-active = <0>;
	219	+ };
	220	+ };
	221	+ ports {
	222	+ panel_in_lvds: endpoint {
	223	+ remote-endpoint = <&lvds_out>;
	224	+ };
	225	+ };
	226	+ };
122	227	};
123	228
124	229	&combphy0_us {
..	..	@@ -134,11 +239,11 @@
134	239	};
135	240
136	241	&csi2_dphy_hw {
137		- status = "okay";
	242	+ status = "disabled";
138	243	};
139	244
140	245	&csi2_dphy0 {
141		- status = "okay";
	246	+ status = "disabled";
142	247
143	248	ports {
144	249	#address-cells = <1>;
..	..	@@ -182,7 +287,7 @@
182	287	* when dsi0 is enabled
183	288	*/
184	289	&dsi0 {
185		- status = "okay";
	290	+ status = "disabled";
186	291	};
187	292
188	293	&dsi0_in_vp0 {
..	..	@@ -190,7 +295,7 @@
190	295	};
191	296
192	297	&dsi0_in_vp1 {
193		- status = "okay";
	298	+ status = "disabled";
194	299	};
195	300
196	301	&dsi0_panel {
..	..	@@ -218,7 +323,30 @@
218	323	};
219	324
220	325	&edp {
221		- hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
	326	+ //hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
	327	+ force-hpd;
	328	+ status = "disabled";
	329	+};
	330	+
	331	+&lvds {
	332	+ status = "okay";
	333	+ ports {
	334	+ port@1 {
	335	+ reg = <1>;
	336	+ lvds_out: endpoint {
	337	+ remote-endpoint = <&panel_in_lvds>;
	338	+ };
	339	+ };
	340	+
	341	+ };
	342	+};
	343	+
	344	+&route_lvds{
	345	+ status = "okay";
	346	+ connect = <&vp2_out_lvds>;
	347	+};
	348	+
	349	+&lvds_in_vp2 {
222	350	status = "okay";
223	351	};
224	352
..	..	@@ -227,18 +355,18 @@
227	355	};
228	356
229	357	&edp_in_vp0 {
230		- status = "okay";
	358	+ status = "disabled";
231	359	};
232	360
233	361	&edp_in_vp1 {
234		- status = "disabled";
	362	+ status = "okay";
235	363	};
236	364
237	365	&gmac0 {
238	366	phy-mode = "rgmii";
239	367	clock_in_out = "output";
240	368
241		- snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
	369	+ snps,reset-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
242	370	snps,reset-active-low;
243	371	/* Reset time is 20ms, 100ms for rtl8211f */
244	372	snps,reset-delays-us = <0 20000 100000>;
..	..	@@ -258,7 +386,7 @@
258	386	rx_delay = <0x2f>;
259	387
260	388	phy-handle = <&rgmii_phy0>;
261		- status = "disabled";
	389	+ status = "okay";
262	390	};
263	391
264	392	&gmac1 {
..	..	@@ -292,9 +420,7 @@
292	420	* power-supply should switche to vcc3v3_lcd1_n
293	421	* when mipi panel is connected to dsi1.
294	422	*/
295		-&gt1x {
296		- power-supply = <&vcc3v3_lcd0_n>;
297		-};
	423	+
298	424
299	425	&i2c3 {
300	426	status = "okay";
..	..	@@ -313,7 +439,7 @@
313	439	};
314	440
315	441	&i2c4 {
316		- status = "okay";
	442	+ status = "disabled";
317	443	gc8034: gc8034@37 {
318	444	compatible = "galaxycore,gc8034";
319	445	status = "okay";
..	..	@@ -359,7 +485,7 @@
359	485	};
360	486	};
361	487	ov5695: ov5695@36 {
362		- status = "okay";
	488	+ status = "disabled";
363	489	compatible = "ovti,ov5695";
364	490	reg = <0x36>;
365	491	clocks = <&cru CLK_CIF_OUT>;
..	..	@@ -379,19 +505,6 @@
379	505	data-lanes = <1 2>;
380	506	};
381	507	};
382		- };
383		-};
384		-
385		-&i2c5 {
386		- status = "okay";
387		-
388		- hym8563: hym8563@51 {
389		- compatible = "haoyu,hym8563";
390		- reg = <0x51>;
391		- #clock-cells = <0>;
392		- clock-frequency = <32768>;
393		- clock-output-names = "xin32k";
394		- /* rtc_int is not connected */
395	508	};
396	509	};
397	510
..	..	@@ -418,6 +531,12 @@
418	531	};
419	532
420	533	&pcie30phy {
	534	+ status = "disabled";
	535	+};
	536	+
	537	+&pcie2x1 {
	538	+ reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
	539	+ vpcie3v3-supply = <&vcc3v3_pcie>;
421	540	status = "okay";
422	541	};
423	542
..	..	@@ -428,30 +547,19 @@
428	547	};
429	548
430	549	&pinctrl {
431		-// cam {
432		-// camera_pwr: camera-pwr {
433		-// rockchip,pins =
434		-// /* camera power en */
435		-// <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
436		-// };
437		-// };
	550	+
438	551	headphone {
439	552	hp_det: hp-det {
440		- rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
	553	+ rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
441	554	};
442	555	};
443	556
444	557	wireless-wlan {
445	558	wifi_host_wake_irq: wifi-host-wake-irq {
446		- rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
	559	+ rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
447	560	};
448	561	};
449		-
450		- wireless-bluetooth {
451		- uart1_gpios: uart1-gpios {
452		- rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
453		- };
454		- };
	562	+
455	563	nk_io_init{
456	564	nk_io_gpio: nk-io-gpio{
457	565	rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
..	..	@@ -461,31 +569,38 @@
461	569	<4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
462	570	<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
463	571	<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>,
464		- <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
	572	+ <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
465	573	<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
466	574	<1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
467	575	<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
468		- <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
469	576	<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
470	577	<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
471	578	<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
472	579	<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
473	580	<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
	581	+ <2 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,//93 SPI2_CS0_M1_3V3
	582	+ <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>,//94 SPI2_MOSI_M1_3V3
	583	+ <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>,//95 SPI2_MISO_M1_3V3
	584	+ <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,//96 SPI2_CLK_M1_3V3
474	585	<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
475	586	};
476	587	};
477	588	};
478	589
	590	+&rk809_sound {
	591	+ hp-det-gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
	592	+};
	593	+
479	594	&rkisp {
480		- status = "okay";
	595	+ status = "disabled";
481	596	};
482	597
483	598	&rkisp_mmu {
484		- status = "okay";
	599	+ status = "disabled";
485	600	};
486	601
487	602	&rkisp_vir0 {
488		- status = "okay";
	603	+ status = "disabled";
489	604
490	605	port {
491	606	#address-cells = <1>;
..	..	@@ -499,13 +614,15 @@
499	614	};
500	615
501	616	&route_dsi0 {
502		- status = "okay";
	617	+ status = "disabled";
503	618	connect = <&vp1_out_dsi0>;
504	619	};
505	620
	621	+
	622	+
506	623	&route_edp {
507		- status = "okay";
508		- connect = <&vp0_out_edp>;
	624	+ status = "disabled";
	625	+ connect = <&vp1_out_edp>;
509	626	};
510	627
511	628	&sata2 {
..	..	@@ -513,23 +630,19 @@
513	630	};
514	631
515	632	&sdmmc2 {
516		- status = "disabled";
517		-};
518		-
519		-&sdmmc1 {
520		- max-frequency = <150000000>;
521		- supports-sdio;
522		- bus-width = <4>;
523		- disable-wp;
524		- cap-sd-highspeed;
525		- cap-sdio-irq;
526		- keep-power-in-suspend;
527		- mmc-pwrseq = <&sdio_pwrseq>;
528		- non-removable;
529		- pinctrl-names = "default";
530		- pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
531		- sd-uhs-sdr104;
532		- status = "okay";
	633	+ max-frequency = <150000000>;
	634	+ supports-sdio;
	635	+ bus-width = <4>;
	636	+ disable-wp;
	637	+ cap-sd-highspeed;
	638	+ cap-sdio-irq;
	639	+ keep-power-in-suspend;
	640	+ mmc-pwrseq = <&sdio_pwrseq>;
	641	+ non-removable;
	642	+ pinctrl-names = "default";
	643	+ pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
	644	+ sd-uhs-sdr104;
	645	+ status = "okay";
533	646	};
534	647
535	648	&spdif_8ch {
..	..	@@ -545,12 +658,12 @@
545	658	};
546	659
547	660	&vcc3v3_lcd0_n {
548		- gpio = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
	661	+ gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
549	662	enable-active-high;
550	663	};
551	664
552	665	&vcc3v3_lcd1_n {
553		- gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
	666	+ gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; //MIPI_3V3EN_GPIO3_A3_d_3V3
554	667	enable-active-high;
555	668	};
556	669
..	..	@@ -562,22 +675,17 @@
562	675
563	676	&wireless_bluetooth {
564	677	compatible = "bluetooth-platdata";
565		- clocks = <&rk809 1>;
566		- clock-names = "ext_clock";
567		- //wifi-bt-power-toggle;
568		- uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
569		- BT,power_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
570		- pinctrl-names = "default", "rts_gpio";
571		- pinctrl-0 = <&uart1m0_rtsn>;
572		- pinctrl-1 = <&uart1_gpios>;
573		- BT,reset_gpio = <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;
574		- BT,wake_gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
575		- BT,wake_host_irq = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
576	678	status = "disabled";
577	679	};
578	680
579	681	&uart0 {
580	682	status = "okay";
	683	+};
	684	+
	685	+&uart1 {
	686	+ pinctrl-names = "default";
	687	+ pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
	688	+ status = "disabled";
581	689	};
582	690
583	691	&uart3 {
..	..	@@ -603,4 +711,4 @@
603	711	&uart9 {
604	712	status = "okay";
605	713	pinctrl-0 = <&uart9m1_xfer>;
606		-};
	714	+};