enable lvds 1280x800

hc

2023-11-20 0d8657dd3056063fb115946b10157477b5c70451

 kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
..
..
@@ -16,13 +16,6 @@
16
16
 	model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
17
17
 	compatible = "rockchip,rk3568-evb1-ddr4-v10", "rockchip,rk3568";
18
18
 
19
-	rk_headset: rk-headset {
20
-		compatible = "rockchip_headset";
21
-		headset_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
22
-		pinctrl-names = "default";
23
-		pinctrl-0 = <&hp_det>;
24
-	};
25
-
26
19
 	vcc2v5_sys: vcc2v5-ddr {
27
20
 		compatible = "regulator-fixed";
28
21
 		regulator-name = "vcc2v5-sys";
..
..
@@ -33,6 +26,15 @@
33
26
 		vin-supply = <&vcc3v3_sys>;
34
27
 	};
35
28
 
29
+	vcc3v3_vga: vcc3v3-vga {
30
+		compatible = "regulator-fixed";
31
+		regulator-name = "vcc3v3_vga";
32
+		regulator-always-on;
33
+		regulator-boot-on;
34
+		gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
35
+		enable-active-high;
36
+		vin-supply = <&vcc3v3_sys>;
37
+	};
36
38
 
37
39
 	pcie30_avdd0v9: pcie30-avdd0v9 {
38
40
 		compatible = "regulator-fixed";
..
..
@@ -59,9 +61,7 @@
59
61
 		regulator-name = "vcc3v3_pcie";
60
62
 		regulator-min-microvolt = <3300000>;
61
63
 		regulator-max-microvolt = <3300000>;
62
-		regulator-always-on;
63
64
 		enable-active-high;
64
-		regulator-boot-on;
65
65
 		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
66
66
 		startup-delay-us = <5000>;
67
67
 		vin-supply = <&dc_12v>;
..
..
@@ -86,49 +86,123 @@
86
86
 		enable-active-high;
87
87
 		regulator-always-on;
88
88
 		regulator-boot-on;
89
-    	};
89
+	};
90
90
 #endif
91
91
 
92
-	    nk_io_init {
93
-                compatible = "nk_io_control";
94
-				vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
95
-                hub_host2_5V_rest_gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
96
-                hub_host3_5v_gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
97
-                vcc_5v_io = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;   //VCC5_IO_EN_GPIO1_A4_3V3
98
-                vcc_12v_io = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
99
-                en_4g_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
100
-                reset_4g_gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; //4G_RST_GPIO01_B2_3V3
101
-                air_mode_4g_gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; //4G_AIR_MODE_GPIO01_B0_3V3
102
-                wake_4g_gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; //4G_WAKEUP_GPIO01_B1_3V3
103
-				hp_en_gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
104
-                spk_out_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;//AMP_SD_GPIO4_C2_3V3			
105
-				wifi_power_en_gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
106
-//				pcie_power_en_gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;//PCIE_PWREN_H_GPIO0_D4				
107
-				pinctrl-names = "default";
108
-				pinctrl-0 = <&nk_io_gpio>;				
109
-        };
110
-		
111
-		panel: panel {
92
+	ndj_io_init {
93
+         	compatible = "nk_io_control";	
94
+			pinctrl-names = "default";
95
+        	pinctrl-0 = <&nk_io_gpio>;
96
+			
97
+			//gpio_op0 = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
98
+			
99
+			vcc_5v {
100
+				gpio_num = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
101
+				gpio_function = <0>;	
102
+			};
103
+			
104
+			vcc_12v {
105
+				gpio_num = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;  //VCC12_IO_EN_GPIO0_C7_3V3
106
+				gpio_function = <0>;
107
+			};
108
+			
109
+			hub_host2_rst {
110
+				gpio_num = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;  //HUB_RST_GPIO4_D2_3V3
111
+				gpio_function = <3>;
112
+			};
113
+			
114
+			hub_host3 {
115
+				gpio_num = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
116
+				gpio_function = <0>;
117
+			};
118
+			
119
+			wake_4g {
120
+				gpio_num = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; //4G_WAKEUP_GPIO01_B1_3V3
121
+				gpio_function = <0>;
122
+			};
123
+			
124
+			air_mode_4g {
125
+				gpio_num = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; //4G_AIR_MODE_GPIO01_B0_3V3
126
+				gpio_function = <0>;
127
+			};
128
+			
129
+			reset_4g {
130
+				gpio_num = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>; //4G_RST_GPIO01_B2_3V3
131
+				gpio_function = <3>;
132
+			};
133
+			
134
+			en_4g {
135
+				gpio_num = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
136
+				gpio_function = <0>;
137
+			};
138
+			
139
+			hp_en {
140
+				gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
141
+				gpio_function = <0>;
142
+			};
143
+			
144
+			wifi_power_en {
145
+				gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
146
+				gpio_function = <0>;
147
+			};
148
+	#if 0		
149
+			do1 {
150
+				gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>; 
151
+				gpio_function = <0>;
152
+			};
153
+			
154
+			do2 {
155
+				gpio_num = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
156
+				gpio_function = <0>;
157
+			};
158
+			
159
+			do3 {
160
+				gpio_num = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
161
+				gpio_function = <0>;
162
+			};
163
+			
164
+			do4 {
165
+				gpio_num = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
166
+				gpio_function = <0>;
167
+			};
168
+			
169
+			do5 {
170
+				gpio_num = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>; 
171
+				gpio_function = <0>;
172
+			};
173
+			
174
+			do6 {
175
+				gpio_num = <&gpio2 RK_PD7 GPIO_ACTIVE_LOW>; 
176
+				gpio_function = <0>;
177
+			};
178
+			
179
+			do7 {
180
+				gpio_num = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>; 
181
+				gpio_function = <0>;
182
+			};
183
+			
184
+			di1 {
185
+				gpio_num = <&gpio2 RK_PD5 GPIO_ACTIVE_HIGH>;
186
+				gpio_function = <1>;
187
+			};
188
+	#endif
189
+	};
190
+	
191
+			panel: panel {
112
192
 				compatible = "simple-panel";
113
193
 				backlight = <&backlight>;
114
-				power-supply = <&vcc3v3_lcd0_n>;
115
-				enable-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; //LCD0_VDD_H_GPIO2_D4
116
-				reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>; //7511_RST_GPIO3_D1
117
-				edp-bl-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;  //LCD0_BKLT_EN_3V3
194
+				power-supply = <&vcc3v3_lcd1_n>;
195
+				enable-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; //LCD0_VDD_H_GPIO2_D4				
196
+				edp-bl-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;  //LCD0_PWBLK_H_GPIO0_B7
118
197
 				edp-bl-en = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
119
198
 				bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
120
199
 				bpc = <8>;
121
200
 				prepare-delay-ms = <200>;
122
201
 				enable-delay-ms = <20>;
123
-				lvds-gpio0 = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; //7511_GPIO0-GPIO3_D2 
124
-				lvds-gpio1 = <&gpio3 RK_PD3 GPIO_ACTIVE_HIGH>; //7511_GPIO1-GPIO3_D3 
125
-				lvds-gpio2 = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; //7511_GPIO2-GPIO3_D4 
126
-				lvds-gpio3 = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; //7511_GPIO3-GPIO3_D5
127
-				nodka-lvds = <15>;
128
202
 
129
203
 				display-timings {
130
-                native-mode = <&timing0>;
131
-                timing0: timing0 {
204
+                native-mode = <&timing>;
205
+                timing: timing {
132
206
 					clock-frequency = <72500000>;
133
207
 					hactive = <1280>;
134
208
 					vactive = <800>;
..
..
@@ -145,8 +219,8 @@
145
219
 					};
146
220
 				};
147
221
 				ports {
148
-					panel_in: endpoint {
149
-					remote-endpoint = <&edp_out>;
222
+					panel_in_lvds: endpoint {
223
+					remote-endpoint = <&lvds_out>;
150
224
 						};
151
225
 					};   
152
226
 				};
..
..
@@ -212,10 +286,6 @@
212
286
  * video_phy0 needs to be enabled
213
287
  * when dsi0 is enabled
214
288
  */
215
-&video_phy0 {
216
-	status = "disabled";
217
-};
218
-
219
289
 &dsi0 {
220
290
 	status = "disabled";
221
291
 };
..
..
@@ -236,10 +306,6 @@
236
306
  * video_phy1 needs to be enabled
237
307
  * when dsi1 is enabled
238
308
  */
239
- 
240
-&video_phy1 {
241
-	status = "disabled";
242
-}; 
243
309
 &dsi1 {
244
310
 	status = "disabled";
245
311
 };
..
..
@@ -256,88 +322,51 @@
256
322
 	power-supply = <&vcc3v3_lcd1_n>;
257
323
 };
258
324
 
259
-/*
260
-*  edp_start
261
-*/
262
-
263
325
 &edp {
326
+	//hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;	
264
327
     force-hpd;
328
+    status = "disabled";
329
+};
330
+
331
+&lvds {
265
332
     status = "okay";
266
333
     ports {
267
334
         port@1 {
268
335
             reg = <1>;
269
-            edp_out: endpoint {
270
-                remote-endpoint = <&panel_in>;
336
+            lvds_out: endpoint {
337
+                remote-endpoint = <&panel_in_lvds>;
271
338
             };
272
339
         };
273
-    };
340
+   
341
+	};
342
+};
343
+
344
+&route_lvds{
345
+	 status = "okay";
346
+	 connect = <&vp2_out_lvds>;
347
+};
348
+
349
+&lvds_in_vp2 {
350
+	status = "okay";
274
351
 };
275
352
 
276
353
 &edp_phy {
277
-    status = "okay";
354
+	status = "okay";
278
355
 };
279
356
 
280
357
 &edp_in_vp0 {
281
-    status = "disabled";
282
-};
283
-
284
-&edp_in_vp1 {
285
-    status = "okay";
286
-};
287
-
288
-&route_edp {
289
-    status = "okay";
290
-    connect = <&vp1_out_edp>;
291
-};
292
-
293
-&route_edp {
294
-	status = "okay";
295
-};
296
-/*
297
-*  edp_end
298
-*/
299
-
300
-/*
301
-*  Hdmi_start
302
-*/
303
-
304
-&hdmi {
305
-	status = "okay";
306
-	rockchip,phy-table =
307
-		<92812500  0x8009 0x0000 0x0270>,
308
-		<165000000 0x800b 0x0000 0x026d>,
309
-		<185625000 0x800b 0x0000 0x01ed>,
310
-		<297000000 0x800b 0x0000 0x01ad>,
311
-		<594000000 0x8029 0x0000 0x0088>,
312
-		<000000000 0x0000 0x0000 0x0000>;
313
-};
314
-
315
-&route_hdmi {
316
-	status = "okay";
317
-	connect = <&vp0_out_hdmi>;
318
-};
319
-
320
-&hdmi_in_vp0 {
321
-	status = "okay";
322
-};
323
-
324
-&hdmi_in_vp1 {
325
358
 	status = "disabled";
326
359
 };
327
360
 
328
-&hdmi_sound {
361
+&edp_in_vp1 {
329
362
 	status = "okay";
330
363
 };
331
-
332
-/*
333
- *  Hdmi_END
334
-*/
335
364
 
336
365
 &gmac0 {
337
366
 	phy-mode = "rgmii";
338
367
 	clock_in_out = "output";
339
368
 
340
-	snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
369
+	snps,reset-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
341
370
 	snps,reset-active-low;
342
371
 	/* Reset time is 20ms, 100ms for rtl8211f */
343
372
 	snps,reset-delays-us = <0 20000 100000>;
..
..
@@ -357,7 +386,7 @@
357
386
 	rx_delay = <0x2f>;
358
387
 
359
388
 	phy-handle = <&rgmii_phy0>;
360
-	status = "disabled";
389
+	status = "okay";
361
390
 };
362
391
 
363
392
 &gmac1 {
..
..
@@ -391,9 +420,7 @@
391
420
  * power-supply should switche to vcc3v3_lcd1_n
392
421
  * when mipi panel is connected to dsi1.
393
422
  */
394
-&gt1x {
395
-	power-supply = <&vcc3v3_lcd0_n>;
396
-};
423
+
397
424
 
398
425
 &i2c3 {
399
426
 	status = "okay";
..
..
@@ -412,7 +439,7 @@
412
439
 };
413
440
 
414
441
 &i2c4 {
415
-	status = "okay";
442
+	status = "disabled";
416
443
 	gc8034: gc8034@37 {
417
444
 		compatible = "galaxycore,gc8034";
418
445
 		status = "okay";
..
..
@@ -458,7 +485,7 @@
458
485
 		};
459
486
 	};
460
487
 	ov5695: ov5695@36 {
461
-		status = "okay";
488
+		status = "disabled";
462
489
 		compatible = "ovti,ov5695";
463
490
 		reg = <0x36>;
464
491
 		clocks = <&cru CLK_CIF_OUT>;
..
..
@@ -481,19 +508,6 @@
481
508
 	};
482
509
 };
483
510
 
484
-&i2c5 {
485
-	status = "okay";
486
-
487
-	hym8563: hym8563@51 {
488
-		compatible = "haoyu,hym8563";
489
-		reg = <0x51>;
490
-		#clock-cells = <0>;
491
-		clock-frequency = <32768>;
492
-		clock-output-names = "xin32k";
493
-		/* rtc_int is not connected */
494
-	};
495
-};
496
-
497
511
 &mdio0 {
498
512
 	rgmii_phy0: phy@0 {
499
513
 		compatible = "ethernet-phy-ieee802.3-c22";
..
..
@@ -508,10 +522,16 @@
508
522
 	};
509
523
 };
510
524
 
525
+&video_phy0 {
526
+	status = "okay";
527
+};
511
528
 
529
+&video_phy1 {
530
+	status = "disabled";
531
+};
512
532
 
513
533
 &pcie30phy {
514
-	status = "okay";
534
+	status = "disabled";
515
535
 };
516
536
 
517
537
 &pcie2x1 {
..
..
@@ -520,31 +540,26 @@
520
540
 	status = "okay";
521
541
 };
522
542
 
543
+&pcie3x2 {
544
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
545
+	vpcie3v3-supply = <&vcc3v3_pcie>;
546
+	status = "okay";
547
+};
548
+
523
549
 &pinctrl {
524
-//	cam {
525
-//		camera_pwr: camera-pwr {
526
-//			rockchip,pins =
527
-//				/* camera power en */
528
-//				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
529
-//		};
530
-//	};
550
+
531
551
 	headphone {
532
552
 		hp_det: hp-det {
533
-			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
553
+			rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
534
554
 		};
535
555
 	};
536
556
 
537
557
 	wireless-wlan {
538
558
 		wifi_host_wake_irq: wifi-host-wake-irq {
539
-			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
559
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
540
560
 		};
541
561
 	};
542
-
543
-	wireless-bluetooth {
544
-		uart1_gpios: uart1-gpios {
545
-			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
546
-		};
547
-	};
562
+	
548
563
 	nk_io_init{
549
564
 		nk_io_gpio: nk-io-gpio{
550
565
 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
..
..
@@ -554,19 +569,26 @@
554
569
 							<4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
555
570
 							<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
556
571
 							<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>,
557
-							<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
572
+							<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>, 
558
573
 							<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
559
574
 							<1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
560
575
 							<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
561
-							<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
562
576
 							<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
563
577
 							<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
564
578
 							<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
565
579
 							<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
566
580
 							<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
581
+							<2 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,//93 SPI2_CS0_M1_3V3
582
+							<2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>,//94 SPI2_MOSI_M1_3V3
583
+							<2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>,//95 SPI2_MISO_M1_3V3
584
+							<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,//96 SPI2_CLK_M1_3V3
567
585
 							<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
568
586
 		};
569
587
 	};
588
+};
589
+
590
+&rk809_sound {
591
+	hp-det-gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
570
592
 };
571
593
 
572
594
 &rkisp {
..
..
@@ -598,28 +620,29 @@
598
620
 
599
621
 
600
622
 
623
+&route_edp {
624
+	status = "disabled";
625
+	connect = <&vp1_out_edp>;
626
+};
627
+
601
628
 &sata2 {
602
629
 	status = "okay";
603
630
 };
604
631
 
605
632
 &sdmmc2 {
606
-        status = "disabled";
607
-};
608
-
609
-&sdmmc1 {
610
-        max-frequency = <150000000>;
611
-        supports-sdio;
612
-        bus-width = <4>;
613
-        disable-wp;
614
-        cap-sd-highspeed;
615
-        cap-sdio-irq;
616
-        keep-power-in-suspend;
617
-        mmc-pwrseq = <&sdio_pwrseq>;
618
-        non-removable;
619
-        pinctrl-names = "default";
620
-        pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
621
-        sd-uhs-sdr104;
622
-        status = "okay";
633
+	max-frequency = <150000000>;
634
+	supports-sdio;
635
+	bus-width = <4>;
636
+	disable-wp;
637
+	cap-sd-highspeed;
638
+	cap-sdio-irq;
639
+	keep-power-in-suspend;
640
+	mmc-pwrseq = <&sdio_pwrseq>;
641
+	non-removable;
642
+	pinctrl-names = "default";
643
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
644
+	sd-uhs-sdr104;
645
+	status = "okay";
623
646
 };
624
647
 
625
648
 &spdif_8ch {
..
..
@@ -640,7 +663,7 @@
640
663
 };
641
664
 
642
665
 &vcc3v3_lcd1_n {
643
-	gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
666
+	gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; //MIPI_3V3EN_GPIO3_A3_d_3V3
644
667
 	enable-active-high;
645
668
 };
646
669
 
..
..
@@ -652,22 +675,17 @@
652
675
 
653
676
 &wireless_bluetooth {
654
677
 	compatible = "bluetooth-platdata";
655
-	clocks = <&rk809 1>;
656
-	clock-names = "ext_clock";
657
-	//wifi-bt-power-toggle;
658
-	uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
659
-	BT,power_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
660
-	pinctrl-names = "default", "rts_gpio";
661
-	pinctrl-0 = <&uart1m0_rtsn>;
662
-	pinctrl-1 = <&uart1_gpios>;
663
-	BT,reset_gpio    = <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;
664
-	BT,wake_gpio     = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
665
-	BT,wake_host_irq = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
666
678
 	status = "disabled";
667
679
 };
668
680
 
669
681
 &uart0 {
670
682
 	status = "okay";
683
+};
684
+
685
+&uart1 {	
686
+	pinctrl-names = "default";	
687
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;	
688
+	status = "disabled";		
671
689
 };
672
690
 
673
691
 &uart3 {
..
..
@@ -693,4 +711,4 @@
693
711
 &uart9 {
694
712
 	status = "okay";
695
713
 	pinctrl-0 = <&uart9m1_xfer>;
696
-};
714
+};