add dts config

hc

2023-12-06 08f87f769b595151be1afeff53e144f543faa614

 kernel/arch/arm/boot/dts/sun8i-v3s.dtsi
..
..
@@ -43,11 +43,27 @@
43
43
 #include <dt-bindings/interrupt-controller/arm-gic.h>
44
44
 #include <dt-bindings/clock/sun8i-v3s-ccu.h>
45
45
 #include <dt-bindings/reset/sun8i-v3s-ccu.h>
46
+#include <dt-bindings/clock/sun8i-de2.h>
46
47
 
47
48
 / {
48
49
 	#address-cells = <1>;
49
50
 	#size-cells = <1>;
50
51
 	interrupt-parent = <&gic>;
52
+
53
+	chosen {
54
+		#address-cells = <1>;
55
+		#size-cells = <1>;
56
+		ranges;
57
+
58
+		framebuffer-lcd {
59
+			compatible = "allwinner,simple-framebuffer",
60
+				     "simple-framebuffer";
61
+			allwinner,pipeline = "mixer0-lcd0";
62
+			clocks = <&display_clocks CLK_MIXER0>,
63
+				 <&ccu CLK_TCON0>;
64
+			status = "disabled";
65
+		};
66
+	};
51
67
 
52
68
 	cpus {
53
69
 		#address-cells = <1>;
..
..
@@ -84,6 +100,7 @@
84
100
 			#clock-cells = <0>;
85
101
 			compatible = "fixed-clock";
86
102
 			clock-frequency = <24000000>;
103
+			clock-accuracy = <50000>;
87
104
 			clock-output-names = "osc24M";
88
105
 		};
89
106
 
..
..
@@ -91,7 +108,8 @@
91
108
 			#clock-cells = <0>;
92
109
 			compatible = "fixed-clock";
93
110
 			clock-frequency = <32768>;
94
-			clock-output-names = "osc32k";
111
+			clock-accuracy = <50000>;
112
+			clock-output-names = "ext-osc32k";
95
113
 		};
96
114
 	};
97
115
 
..
..
@@ -103,11 +121,11 @@
103
121
 
104
122
 		display_clocks: clock@1000000 {
105
123
 			compatible = "allwinner,sun8i-v3s-de2-clk";
106
-			reg = <0x01000000 0x100000>;
107
-			clocks = <&ccu CLK_DE>,
108
-				 <&ccu CLK_BUS_DE>;
109
-			clock-names = "mod",
110
-				      "bus";
124
+			reg = <0x01000000 0x10000>;
125
+			clocks = <&ccu CLK_BUS_DE>,
126
+				 <&ccu CLK_DE>;
127
+			clock-names = "bus",
128
+				      "mod";
111
129
 			resets = <&ccu RST_BUS_DE>;
112
130
 			#clock-cells = <1>;
113
131
 			#reset-cells = <1>;
..
..
@@ -121,24 +139,28 @@
121
139
 			clock-names = "bus",
122
140
 				      "mod";
123
141
 			resets = <&display_clocks 0>;
124
-			assigned-clocks = <&display_clocks 6>;
125
-			assigned-clock-rates = <150000000>;
126
142
 
127
143
 			ports {
128
144
 				#address-cells = <1>;
129
145
 				#size-cells = <0>;
130
146
 
131
147
 				mixer0_out: port@1 {
132
-					#address-cells = <1>;
133
-					#size-cells = <0>;
134
148
 					reg = <1>;
135
149
 
136
-					mixer0_out_tcon0: endpoint@0 {
137
-						reg = <0>;
150
+					mixer0_out_tcon0: endpoint {
138
151
 						remote-endpoint = <&tcon0_in_mixer0>;
139
152
 					};
140
153
 				};
141
154
 			};
155
+		};
156
+
157
+		syscon: system-control@1c00000 {
158
+			compatible = "allwinner,sun8i-v3s-system-control",
159
+				     "allwinner,sun8i-h3-system-control";
160
+			reg = <0x01c00000 0x1000>;
161
+			#address-cells = <1>;
162
+			#size-cells = <1>;
163
+			ranges;
142
164
 		};
143
165
 
144
166
 		tcon0: lcd-controller@1c0c000 {
..
..
@@ -150,6 +172,7 @@
150
172
 			clock-names = "ahb",
151
173
 				      "tcon-ch0";
152
174
 			clock-output-names = "tcon-pixel-clock";
175
+			#clock-cells = <0>;
153
176
 			resets = <&ccu RST_BUS_TCON0>;
154
177
 			reset-names = "lcd";
155
178
 			status = "disabled";
..
..
@@ -159,12 +182,9 @@
159
182
 				#size-cells = <0>;
160
183
 
161
184
 				tcon0_in: port@0 {
162
-					#address-cells = <1>;
163
-					#size-cells = <0>;
164
185
 					reg = <0>;
165
186
 
166
-					tcon0_in_mixer0: endpoint@0 {
167
-						reg = <0>;
187
+					tcon0_in_mixer0: endpoint {
168
188
 						remote-endpoint = <&mixer0_out_tcon0>;
169
189
 					};
170
190
 				};
..
..
@@ -192,6 +212,8 @@
192
212
 			resets = <&ccu RST_BUS_MMC0>;
193
213
 			reset-names = "ahb";
194
214
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
215
+			pinctrl-names = "default";
216
+			pinctrl-0 = <&mmc0_pins>;
195
217
 			status = "disabled";
196
218
 			#address-cells = <1>;
197
219
 			#size-cells = <0>;
..
..
@@ -237,6 +259,17 @@
237
259
 			#size-cells = <0>;
238
260
 		};
239
261
 
262
+		crypto@1c15000 {
263
+			compatible = "allwinner,sun8i-v3s-crypto",
264
+				     "allwinner,sun8i-a33-crypto";
265
+			reg = <0x01c15000 0x1000>;
266
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
267
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
268
+			clock-names = "ahb", "mod";
269
+			resets = <&ccu RST_BUS_CE>;
270
+			reset-names = "ahb";
271
+		};
272
+
240
273
 		usb_otg: usb@1c19000 {
241
274
 			compatible = "allwinner,sun8i-h3-musb";
242
275
 			reg = <0x01c19000 0x0400>;
..
..
@@ -267,17 +300,20 @@
267
300
 		ccu: clock@1c20000 {
268
301
 			compatible = "allwinner,sun8i-v3s-ccu";
269
302
 			reg = <0x01c20000 0x400>;
270
-			clocks = <&osc24M>, <&osc32k>;
303
+			clocks = <&osc24M>, <&rtc 0>;
271
304
 			clock-names = "hosc", "losc";
272
305
 			#clock-cells = <1>;
273
306
 			#reset-cells = <1>;
274
307
 		};
275
308
 
276
309
 		rtc: rtc@1c20400 {
277
-			compatible = "allwinner,sun6i-a31-rtc";
310
+			#clock-cells = <1>;
311
+			compatible = "allwinner,sun8i-v3-rtc";
278
312
 			reg = <0x01c20400 0x54>;
279
313
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
280
314
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
315
+			clocks = <&osc32k>;
316
+			clock-output-names = "osc32k", "osc32k-out";
281
317
 		};
282
318
 
283
319
 		pio: pinctrl@1c20800 {
..
..
@@ -285,21 +321,46 @@
285
321
 			reg = <0x01c20800 0x400>;
286
322
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
287
323
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
288
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
324
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
289
325
 			clock-names = "apb", "hosc", "losc";
290
326
 			gpio-controller;
291
327
 			#gpio-cells = <3>;
292
328
 			interrupt-controller;
293
329
 			#interrupt-cells = <3>;
294
330
 
331
+			/omit-if-no-ref/
332
+			csi1_8bit_pins: csi1-8bit-pins {
333
+				pins = "PE0", "PE2", "PE3", "PE8", "PE9",
334
+				       "PE10", "PE11", "PE12", "PE13", "PE14",
335
+				       "PE15";
336
+				function = "csi";
337
+			};
338
+
339
+			/omit-if-no-ref/
340
+			csi1_mclk_pin: csi1-mclk-pin {
341
+				pins = "PE1";
342
+				function = "csi";
343
+			};
344
+
295
345
 			i2c0_pins: i2c0-pins {
296
346
 				pins = "PB6", "PB7";
297
347
 				function = "i2c0";
298
348
 			};
299
349
 
350
+			/omit-if-no-ref/
351
+			i2c1_pe_pins: i2c1-pe-pins {
352
+				pins = "PE21", "PE22";
353
+				function = "i2c1";
354
+			};
355
+
300
356
 			uart0_pb_pins: uart0-pb-pins {
301
357
 				pins = "PB8", "PB9";
302
358
 				function = "uart0";
359
+			};
360
+
361
+			uart2_pins: uart2-pins {
362
+				pins = "PB0", "PB1";
363
+				function = "uart2";
303
364
 			};
304
365
 
305
366
 			mmc0_pins: mmc0-pins {
..
..
@@ -325,10 +386,11 @@
325
386
 		};
326
387
 
327
388
 		timer@1c20c00 {
328
-			compatible = "allwinner,sun4i-a10-timer";
389
+			compatible = "allwinner,sun8i-v3s-timer";
329
390
 			reg = <0x01c20c00 0xa0>;
330
391
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
331
-				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
392
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
393
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
332
394
 			clocks = <&osc24M>;
333
395
 		};
334
396
 
..
..
@@ -336,6 +398,7 @@
336
398
 			compatible = "allwinner,sun6i-a31-wdt";
337
399
 			reg = <0x01c20ca0 0x20>;
338
400
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
401
+			clocks = <&osc24M>;
339
402
 		};
340
403
 
341
404
 		lradc: lradc@1c22800 {
..
..
@@ -375,6 +438,8 @@
375
438
 			reg-io-width = <4>;
376
439
 			clocks = <&ccu CLK_BUS_UART2>;
377
440
 			resets = <&ccu RST_BUS_UART2>;
441
+			pinctrl-0 = <&uart2_pins>;
442
+			pinctrl-names = "default";
378
443
 			status = "disabled";
379
444
 		};
380
445
 
..
..
@@ -402,6 +467,49 @@
402
467
 			#size-cells = <0>;
403
468
 		};
404
469
 
470
+		emac: ethernet@1c30000 {
471
+			compatible = "allwinner,sun8i-v3s-emac";
472
+			syscon = <&syscon>;
473
+			reg = <0x01c30000 0x10000>;
474
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
475
+			interrupt-names = "macirq";
476
+			resets = <&ccu RST_BUS_EMAC>;
477
+			reset-names = "stmmaceth";
478
+			clocks = <&ccu CLK_BUS_EMAC>;
479
+			clock-names = "stmmaceth";
480
+			phy-handle = <&int_mii_phy>;
481
+			phy-mode = "mii";
482
+			status = "disabled";
483
+
484
+			mdio: mdio {
485
+				#address-cells = <1>;
486
+				#size-cells = <0>;
487
+				compatible = "snps,dwmac-mdio";
488
+			};
489
+
490
+			mdio_mux: mdio-mux {
491
+				compatible = "allwinner,sun8i-h3-mdio-mux";
492
+				#address-cells = <1>;
493
+				#size-cells = <0>;
494
+
495
+				mdio-parent-bus = <&mdio>;
496
+				/* Only one MDIO is usable at the time */
497
+				internal_mdio: mdio@1 {
498
+					compatible = "allwinner,sun8i-h3-mdio-internal";
499
+					reg = <1>;
500
+					#address-cells = <1>;
501
+					#size-cells = <0>;
502
+
503
+					int_mii_phy: ethernet-phy@1 {
504
+						compatible = "ethernet-phy-ieee802.3-c22";
505
+						reg = <1>;
506
+						clocks = <&ccu CLK_BUS_EPHY>;
507
+						resets = <&ccu RST_BUS_EPHY>;
508
+					};
509
+				};
510
+			};
511
+		};
512
+
405
513
 		spi0: spi@1c68000 {
406
514
 			compatible = "allwinner,sun8i-h3-spi";
407
515
 			reg = <0x01c68000 0x1000>;
..
..
@@ -417,7 +525,7 @@
417
525
 		};
418
526
 
419
527
 		gic: interrupt-controller@1c81000 {
420
-			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
528
+			compatible = "arm,gic-400";
421
529
 			reg = <0x01c81000 0x1000>,
422
530
 			      <0x01c82000 0x2000>,
423
531
 			      <0x01c84000 0x2000>,
..
..
@@ -426,5 +534,17 @@
426
534
 			#interrupt-cells = <3>;
427
535
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
428
536
 		};
537
+
538
+		csi1: camera@1cb4000 {
539
+			compatible = "allwinner,sun8i-v3s-csi";
540
+			reg = <0x01cb4000 0x3000>;
541
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
542
+			clocks = <&ccu CLK_BUS_CSI>,
543
+				 <&ccu CLK_CSI1_SCLK>,
544
+				 <&ccu CLK_DRAM_CSI>;
545
+			clock-names = "bus", "mod", "ram";
546
+			resets = <&ccu RST_BUS_CSI>;
547
+			status = "disabled";
548
+		};
429
549
 	};
430
550
 };