add dts config

hc

2023-12-06 08f87f769b595151be1afeff53e144f543faa614

 kernel/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
..
..
@@ -66,21 +66,6 @@
66
66
 			clock-frequency = <24000000>;
67
67
 		};
68
68
 	};
69
-
70
-	thermal-zones {
71
-		cpu_thermal: cpu-thermal {
72
-			cooling-maps {
73
-				cooling_map0: map0 {
74
-				     /* Corresponds to 800MHz at freq_table */
75
-				     cooling-device = <&cpu0 7 7>;
76
-				};
77
-				cooling_map1: map1 {
78
-				     /* Corresponds to 200MHz at freq_table */
79
-				     cooling-device = <&cpu0 13 13>;
80
-			       };
81
-		       };
82
-		};
83
-	};
84
69
 };
85
70
 
86
71
 &bus_dmc {
..
..
@@ -161,6 +146,30 @@
161
146
 	cpu0-supply = <&buck2_reg>;
162
147
 };
163
148
 
149
+&cpu0_opp_table {
150
+	opp-1000000000 {
151
+		opp-suspend;
152
+	};
153
+	opp-800000000 {
154
+		/delete-property/opp-suspend;
155
+	};
156
+};
157
+
158
+&cpu_thermal {
159
+	cooling-maps {
160
+		cooling_map0: map0 {
161
+			/* Corresponds to 800MHz at freq_table */
162
+			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
163
+					 <&cpu2 7 7>, <&cpu3 7 7>;
164
+		};
165
+		cooling_map1: map1 {
166
+			/* Corresponds to 200MHz at freq_table */
167
+			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
168
+					 <&cpu2 13 13>, <&cpu3 13 13>;
169
+		};
170
+	};
171
+};
172
+
164
173
 &pinctrl_1 {
165
174
 	gpio_power_key: power_key {
166
175
 		samsung,pins = "gpx1-3";
..
..
@@ -225,6 +234,11 @@
225
234
 	assigned-clock-rates = <0>, <176000000>;
226
235
 };
227
236
 
237
+&gpu {
238
+	mali-supply = <&buck4_reg>;
239
+	status = "okay";
240
+};
241
+
228
242
 &hdmi {
229
243
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
230
244
 	pinctrl-names = "default";
..
..
@@ -258,7 +272,7 @@
258
272
 
259
273
 		intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
260
274
 		connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
261
-		reset-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
275
+		reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
262
276
 		initial-mode = <1>;
263
277
 	};
264
278
 
..
..
@@ -385,7 +399,6 @@
385
399
 				regulator-name = "LDO20_1.8V";
386
400
 				regulator-min-microvolt = <1800000>;
387
401
 				regulator-max-microvolt = <1800000>;
388
-				regulator-boot-on;
389
402
 			};
390
403
 
391
404
 			ldo21_reg: LDO21 {
..
..
@@ -413,7 +426,7 @@
413
426
 			};
414
427
 
415
428
 			buck1_reg: BUCK1 {
416
-				regulator-name = "vdd_mif";
429
+				regulator-name = "VDD_MIF";
417
430
 				regulator-min-microvolt = <900000>;
418
431
 				regulator-max-microvolt = <1100000>;
419
432
 				regulator-always-on;
..
..
@@ -421,7 +434,7 @@
421
434
 			};
422
435
 
423
436
 			buck2_reg: BUCK2 {
424
-				regulator-name = "vdd_arm";
437
+				regulator-name = "VDD_ARM";
425
438
 				regulator-min-microvolt = <900000>;
426
439
 				regulator-max-microvolt = <1350000>;
427
440
 				regulator-always-on;
..
..
@@ -429,7 +442,7 @@
429
442
 			};
430
443
 
431
444
 			buck3_reg: BUCK3 {
432
-				regulator-name = "vdd_int";
445
+				regulator-name = "VDD_INT";
433
446
 				regulator-min-microvolt = <900000>;
434
447
 				regulator-max-microvolt = <1050000>;
435
448
 				regulator-always-on;
..
..
@@ -437,7 +450,7 @@
437
450
 			};
438
451
 
439
452
 			buck4_reg: BUCK4 {
440
-				regulator-name = "vdd_g3d";
453
+				regulator-name = "VDD_G3D";
441
454
 				regulator-min-microvolt = <900000>;
442
455
 				regulator-max-microvolt = <1100000>;
443
456
 				regulator-microvolt-offset = <50000>;
..
..
@@ -538,8 +551,7 @@
538
551
 	pinctrl-names = "default";
539
552
 	vmmc-supply = <&ldo21_reg>;
540
553
 	vqmmc-supply = <&ldo4_reg>;
541
-	cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>;
542
-	cd-inverted;
554
+	cd-gpios = <&gpk2 2 GPIO_ACTIVE_LOW>;
543
555
 	status = "okay";
544
556
 };
545
557