add dts config

hc

2023-12-06 08f87f769b595151be1afeff53e144f543faa614

 kernel/arch/arm/boot/dts/exynos4412-midas.dtsi
..
..
@@ -13,6 +13,7 @@
13
13
 #include "exynos4412.dtsi"
14
14
 #include "exynos4412-ppmu-common.dtsi"
15
15
 #include <dt-bindings/gpio/gpio.h>
16
+#include <dt-bindings/input/input.h>
16
17
 #include <dt-bindings/interrupt-controller/irq.h>
17
18
 #include <dt-bindings/clock/maxim,max77686.h>
18
19
 #include <dt-bindings/pinctrl/samsung.h>
..
..
@@ -36,12 +37,12 @@
36
37
 
37
38
 	fixed-rate-clocks {
38
39
 		xxti {
39
-			compatible = "samsung,clock-xxti", "fixed-clock";
40
+			compatible = "samsung,clock-xxti";
40
41
 			clock-frequency = <0>;
41
42
 		};
42
43
 
43
44
 		xusbxti {
44
-			compatible = "samsung,clock-xusbxti", "fixed-clock";
45
+			compatible = "samsung,clock-xusbxti";
45
46
 			clock-frequency = <24000000>;
46
47
 		};
47
48
 	};
..
..
@@ -92,6 +93,39 @@
92
93
 		enable-active-high;
93
94
 	};
94
95
 
96
+	touchkey_reg: voltage-regulator-6 {
97
+		compatible = "regulator-fixed";
98
+		regulator-name = "LED_VDD_3.3V";
99
+		regulator-min-microvolt = <3300000>;
100
+		regulator-max-microvolt = <3300000>;
101
+		enable-active-high;
102
+		status = "disabled";
103
+	};
104
+
105
+	vbatt_reg: voltage-regulator-7 {
106
+		compatible = "regulator-fixed";
107
+		regulator-name = "VBATT";
108
+		regulator-min-microvolt = <5000000>;
109
+		regulator-max-microvolt = <5000000>;
110
+		regulator-always-on;
111
+	};
112
+
113
+	mic_bias_reg: voltage-regulator-8 {
114
+		compatible = "regulator-fixed";
115
+		regulator-name = "MICBIAS_LDO_2.8V";
116
+		regulator-min-microvolt = <2800000>;
117
+		regulator-max-microvolt = <2800000>;
118
+		gpio = <&gpf1 7 GPIO_ACTIVE_HIGH>;
119
+		enable-active-high;
120
+	};
121
+
122
+	submic_bias_reg: voltage-regulator-9 {
123
+		compatible = "regulator-fixed";
124
+		regulator-name = "SUB_MICBIAS_LDO_2.8V";
125
+		regulator-min-microvolt = <2800000>;
126
+		regulator-max-microvolt = <2800000>;
127
+	};
128
+
95
129
 	gpio-keys {
96
130
 		compatible = "gpio-keys";
97
131
 		pinctrl-names = "default";
..
..
@@ -130,7 +164,8 @@
130
164
 
131
165
 	i2c_max77693: i2c-gpio-1 {
132
166
 		compatible = "i2c-gpio";
133
-		gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
167
+		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
168
+		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
134
169
 		i2c-gpio,delay-us = <2>;
135
170
 		#address-cells = <1>;
136
171
 		#size-cells = <0>;
..
..
@@ -178,7 +213,8 @@
178
213
 
179
214
 	i2c_max77693_fuel: i2c-gpio-3 {
180
215
 		compatible = "i2c-gpio";
181
-		gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
216
+		sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
217
+		scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
182
218
 		i2c-gpio,delay-us = <2>;
183
219
 		#address-cells = <1>;
184
220
 		#size-cells = <0>;
..
..
@@ -197,9 +233,29 @@
197
233
 		};
198
234
 	};
199
235
 
236
+	i2c-gpio-4 {
237
+		compatible = "i2c-gpio";
238
+		sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
239
+		scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
240
+		i2c-gpio,delay-us = <2>;
241
+		#address-cells = <1>;
242
+		#size-cells = <0>;
243
+
244
+		touchkey@20 {
245
+			compatible = "cypress,midas-touchkey";
246
+			reg = <0x20>;
247
+			vdd-supply = <&touchkey_reg>;
248
+			vcc-supply = <&ldo5_reg>;
249
+			interrupt-parent = <&gpj0>;
250
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
251
+			linux,keycodes = <KEY_BACK KEY_MENU>;
252
+		};
253
+	};
254
+
200
255
 	i2c-mhl {
201
256
 		compatible = "i2c-gpio";
202
-		gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
257
+		sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
258
+		scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
203
259
 		i2c-gpio,delay-us = <100>;
204
260
 		#address-cells = <1>;
205
261
 		#size-cells = <0>;
..
..
@@ -234,16 +290,18 @@
234
290
 		clock-names = "ext_clock";
235
291
 	};
236
292
 
237
-	sound {
238
-		compatible = "samsung,trats2-audio";
239
-		samsung,i2s-controller = <&i2s0>;
240
-		samsung,model = "Trats2";
241
-		samsung,audio-codec = <&wm1811>;
242
-		samsung,audio-routing =
243
-			"SPK", "SPKOUTLN",
244
-			"SPK", "SPKOUTLP",
245
-			"SPK", "SPKOUTRN",
246
-			"SPK", "SPKOUTRP";
293
+	sound: sound {
294
+		compatible = "samsung,midas-audio";
295
+		model = "Midas";
296
+		mic-bias-supply = <&mic_bias_reg>;
297
+		submic-bias-supply = <&submic_bias_reg>;
298
+
299
+		cpu {
300
+			sound-dai = <&i2s0 0>;
301
+		};
302
+		codec {
303
+			sound-dai = <&wm1811>;
304
+		};
247
305
 	};
248
306
 
249
307
 	thermistor-ap {
..
..
@@ -260,21 +318,6 @@
260
318
 		pullup-ohm = <100000>;	 /* 100K */
261
319
 		pulldown-ohm = <100000>; /* 100K */
262
320
 		io-channels = <&adc 2>;  /* Battery temperature */
263
-	};
264
-
265
-	thermal-zones {
266
-		cpu_thermal: cpu-thermal {
267
-			cooling-maps {
268
-				map0 {
269
-				     /* Corresponds to 800MHz at freq_table */
270
-				     cooling-device = <&cpu0 7 7>;
271
-				};
272
-				map1 {
273
-				     /* Corresponds to 200MHz at freq_table */
274
-				     cooling-device = <&cpu0 13 13>;
275
-			       };
276
-		       };
277
-		};
278
321
 	};
279
322
 };
280
323
 
..
..
@@ -342,6 +385,21 @@
342
385
 
343
386
 &cpu0 {
344
387
 	cpu0-supply = <&buck2_reg>;
388
+};
389
+
390
+&cpu_thermal {
391
+	cooling-maps {
392
+		map0 {
393
+			/* Corresponds to 800MHz at freq_table */
394
+			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
395
+					 <&cpu2 7 7>, <&cpu3 7 7>;
396
+		};
397
+		map1 {
398
+			/* Corresponds to 200MHz at freq_table */
399
+			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
400
+					 <&cpu2 13 13>, <&cpu3 13 13>;
401
+		};
402
+	};
345
403
 };
346
404
 
347
405
 &csis_0 {
..
..
@@ -449,6 +507,11 @@
449
507
 	status = "okay";
450
508
 };
451
509
 
510
+&gpu {
511
+	mali-supply = <&buck4_reg>;
512
+	status = "okay";
513
+};
514
+
452
515
 &hdmi {
453
516
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
454
517
 	pinctrl-names = "default";
..
..
@@ -525,7 +588,7 @@
525
588
 		clocks = <&camera 1>;
526
589
 		clock-names = "extclk";
527
590
 		samsung,camclk-out = <1>;
528
-		gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
591
+		gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
529
592
 
530
593
 		port {
531
594
 			is_s5k6a3_ep: endpoint {
..
..
@@ -556,11 +619,37 @@
556
619
 	wm1811: wm1811@1a {
557
620
 		compatible = "wlf,wm1811";
558
621
 		reg = <0x1a>;
559
-		clocks = <&pmu_system_controller 0>;
560
-		clock-names = "MCLK1";
561
-		DCVDD-supply = <&ldo3_reg>;
622
+		clocks = <&pmu_system_controller 0>,
623
+			<&max77686 MAX77686_CLK_PMIC>;
624
+		clock-names = "MCLK1", "MCLK2";
625
+		interrupt-controller;
626
+		#interrupt-cells = <2>;
627
+		interrupt-parent = <&gpx3>;
628
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
629
+
630
+		gpio-controller;
631
+		#gpio-cells = <2>;
632
+		#sound-dai-cells = <0>;
633
+
634
+		wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0
635
+			0x0 0x8000 0x0 0x0 0x0>;
636
+		wlf,micbias-cfg = <0x2f 0x2b>;
637
+
638
+		wlf,lineout1-feedback;
639
+		wlf,lineout1-se;
640
+		wlf,lineout2-se;
641
+		wlf,ldoena-always-driven;
642
+
643
+		AVDD2-supply = <&vbatt_reg>;
562
644
 		DBVDD1-supply = <&ldo3_reg>;
645
+		DBVDD2-supply = <&vbatt_reg>;
646
+		DBVDD3-supply = <&vbatt_reg>;
647
+		DCVDD-supply = <&ldo3_reg>;
648
+		CPVDD-supply = <&vbatt_reg>;
649
+		SPKVDD1-supply = <&vbatt_reg>;
650
+		SPKVDD2-supply = <&vbatt_reg>;
563
651
 		wlf,ldo1ena = <&gpj0 4 0>;
652
+		wlf,ldo2ena = <&gpj0 4 0>;
564
653
 	};
565
654
 };
566
655
 
..
..
@@ -782,7 +871,7 @@
782
871
 			};
783
872
 
784
873
 			buck1_reg: BUCK1 {
785
-				regulator-name = "vdd_mif";
874
+				regulator-name = "VDD_MIF";
786
875
 				regulator-min-microvolt = <850000>;
787
876
 				regulator-max-microvolt = <1100000>;
788
877
 				regulator-always-on;
..
..
@@ -793,7 +882,7 @@
793
882
 			};
794
883
 
795
884
 			buck2_reg: BUCK2 {
796
-				regulator-name = "vdd_arm";
885
+				regulator-name = "VDD_ARM";
797
886
 				regulator-min-microvolt = <850000>;
798
887
 				regulator-max-microvolt = <1500000>;
799
888
 				regulator-always-on;
..
..
@@ -804,7 +893,7 @@
804
893
 			};
805
894
 
806
895
 			buck3_reg: BUCK3 {
807
-				regulator-name = "vdd_int";
896
+				regulator-name = "VDD_INT";
808
897
 				regulator-min-microvolt = <850000>;
809
898
 				regulator-max-microvolt = <1150000>;
810
899
 				regulator-always-on;
..
..
@@ -815,7 +904,7 @@
815
904
 			};
816
905
 
817
906
 			buck4_reg: BUCK4 {
818
-				regulator-name = "vdd_g3d";
907
+				regulator-name = "VDD_G3D";
819
908
 				regulator-min-microvolt = <850000>;
820
909
 				regulator-max-microvolt = <1150000>;
821
910
 				regulator-boot-on;
..
..
@@ -1269,8 +1358,7 @@
1269
1358
 
1270
1359
 &sdhci_2 {
1271
1360
 	bus-width = <4>;
1272
-	cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
1273
-	cd-inverted;
1361
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
1274
1362
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
1275
1363
 	pinctrl-names = "default";
1276
1364
 	vmmc-supply = <&ldo21_reg>;