change wifi driver to cypress

hc

2024-01-05 071106ecf68c401173c58808b1cf5f68cc50d390

 kernel/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
..
..
@@ -194,19 +194,24 @@
194
194
 
195
195
 	backlight: backlight {
196
196
 		compatible = "pwm-backlight";
197
-		brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
198
-				     17 18 19 20 21 22 23 24 25 26 27 28 29 30
199
-				     31 32 33 34 35 36 37 38 39 40 41 42 43 44
200
-				     45 46 47 48 49 50 51 52 53 54 55 56 57 58
201
-				     59 60 61 62 63 64 65 66 67 68 69 70 71 72
202
-				     73 74 75 76 77 78 79 80 81 82 83 84 85 86
203
-				     87 88 89 90 91 92 93 94 95 96 97 98 99 100>;
204
-		default-brightness-level = <51>;
205
197
 		enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
206
198
 		power-supply = <&pp3300_disp>;
207
199
 		pinctrl-names = "default";
208
200
 		pinctrl-0 = <&bl_en>;
209
201
 		pwm-delay-us = <10000>;
202
+	};
203
+
204
+	gpio_keys: gpio-keys {
205
+		compatible = "gpio-keys";
206
+		pinctrl-names = "default";
207
+		pinctrl-0 = <&bt_host_wake_l>;
208
+
209
+		wake_on_bt: wake-on-bt {
210
+			label = "Wake-on-Bluetooth";
211
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
212
+			linux,code = <KEY_WAKEUP>;
213
+			wakeup-source;
214
+		};
210
215
 	};
211
216
 };
212
217
 
..
..
@@ -231,6 +236,14 @@
231
236
 
232
237
 &edp {
233
238
 	status = "okay";
239
+
240
+	/*
241
+	 * eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only
242
+	 * set this here, because rk3399-gru.dtsi ensures we can generate this
243
+	 * off GPLL=600MHz, whereas some other RK3399 boards may not.
244
+	 */
245
+	assigned-clocks = <&cru PCLK_EDP>;
246
+	assigned-clock-rates = <24000000>;
234
247
 
235
248
 	ports {
236
249
 		edp_out: port@1 {
..
..
@@ -286,11 +299,9 @@
286
299
 		#pwm-cells = <1>;
287
300
 	};
288
301
 
289
-	usbc_extcon1: extcon@1 {
302
+	usbc_extcon1: extcon1 {
290
303
 		compatible = "google,extcon-usbc-cros-ec";
291
304
 		google,usb-port-id = <1>;
292
-
293
-		#extcon-cells = <0>;
294
305
 	};
295
306
 };
296
307
 
..
..
@@ -392,6 +403,7 @@
392
403
 	};
393
404
 
394
405
 	wlan_host_wake_l: wlan-host-wake-l {
406
+		/* Kevin has an external pull up, but Bob does not */
395
407
 		rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
396
408
 	};
397
409
 };