移去rt

hc

2023-12-08 01573e231f18eb2d99162747186f59511f56b64d

 kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
old mode 100644new mode 100755
..
..
@@ -8,12 +8,21 @@
8
8
 
9
9
 #include <dt-bindings/gpio/gpio.h>
10
10
 #include <dt-bindings/pinctrl/rockchip.h>
11
+#include <dt-bindings/display/media-bus-format.h>
11
12
 #include "rk3568.dtsi"
12
13
 #include "rk3568-evb.dtsi"
13
14
 
14
15
 / {
15
16
 	model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
16
17
 	compatible = "rockchip,rk3568-evb1-ddr4-v10", "rockchip,rk3568";
18
+
19
+	rk_headset: rk-headset {
20
+		compatible = "rockchip_headset";
21
+		headset_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
22
+		spk_ctl_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;//AMP_SD_GPIO4_C2_3V3
23
+		pinctrl-names = "default";
24
+		pinctrl-0 = <&hp_det>;
25
+	};
17
26
 
18
27
 	vcc2v5_sys: vcc2v5-ddr {
19
28
 		compatible = "regulator-fixed";
..
..
@@ -60,7 +69,9 @@
60
69
 		regulator-name = "vcc3v3_pcie";
61
70
 		regulator-min-microvolt = <3300000>;
62
71
 		regulator-max-microvolt = <3300000>;
72
+		regulator-always-on;
63
73
 		enable-active-high;
74
+		regulator-boot-on;
64
75
 		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
65
76
 		startup-delay-us = <5000>;
66
77
 		vin-supply = <&dc_12v>;
..
..
@@ -85,9 +96,8 @@
85
96
 		enable-active-high;
86
97
 		regulator-always-on;
87
98
 		regulator-boot-on;
88
-	};
99
+    	};
89
100
 #endif
90
-
91
101
 	ndj_io_init {
92
102
          	compatible = "nk_io_control";	
93
103
 			pinctrl-names = "default";
..
..
@@ -185,7 +195,69 @@
185
195
 				gpio_function = <1>;
186
196
 			};
187
197
 	#endif
188
-};
198
+		};
199
+#if 0			
200
+	    nk_io_init {
201
+                compatible = "nk_io_control";
202
+//				vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
203
+                hub_host2_5V_rest_gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
204
+                hub_host3_5v_gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
205
+                vcc_5v_io = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;   //VCC5_IO_EN_GPIO1_A4_3V3
206
+                vcc_12v_io = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
207
+                en_4g_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
208
+                reset_4g_gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; //4G_RST_GPIO01_B2_3V3
209
+                air_mode_4g_gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; //4G_AIR_MODE_GPIO01_B0_3V3
210
+                wake_4g_gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; //4G_WAKEUP_GPIO01_B1_3V3
211
+				hp_en_gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
212
+//              spk_out_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;//AMP_SD_GPIO4_C2_3V3			
213
+				wifi_power_en_gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
214
+//				pcie_power_en_gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;//PCIE_PWREN_H_GPIO0_D4				
215
+				pinctrl-names = "default";
216
+				pinctrl-0 = <&nk_io_gpio>;				
217
+        };
218
+#endif	
219
+		panel: panel {
220
+				compatible = "simple-panel";
221
+				backlight = <&backlight>;
222
+				power-supply = <&vcc3v3_lcd0_n>;
223
+				enable-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; //LCD0_VDD_H_GPIO2_D4
224
+				reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>; //7511_RST_GPIO3_D1
225
+				edp-bl-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;  //LCD0_BKLT_EN_3V3
226
+				edp-bl-en = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
227
+				bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
228
+				bpc = <8>;
229
+				prepare-delay-ms = <200>;
230
+				enable-delay-ms = <20>;
231
+				lvds-gpio0 = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; //7511_GPIO0-GPIO3_D2 
232
+				lvds-gpio1 = <&gpio3 RK_PD3 GPIO_ACTIVE_HIGH>; //7511_GPIO1-GPIO3_D3 
233
+				lvds-gpio2 = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; //7511_GPIO2-GPIO3_D4 
234
+				lvds-gpio3 = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; //7511_GPIO3-GPIO3_D5
235
+				nodka-lvds = <15>;
236
+
237
+				display-timings {
238
+                native-mode = <&timing0>;
239
+                timing0: timing0 {
240
+					clock-frequency = <72500000>;
241
+					hactive = <1280>;
242
+					vactive = <800>;
243
+					hfront-porch = <70>;
244
+					hsync-len = <2>;
245
+					hback-porch = <88>;
246
+					vfront-porch = <7>;
247
+					vsync-len = <4>;
248
+					vback-porch = <17>;
249
+					hsync-active = <21>;
250
+					vsync-active = <0>;
251
+					de-active = <0>;
252
+					pixelclk-active = <0>;			
253
+					};
254
+				};
255
+				ports {
256
+					panel_in: endpoint {
257
+					remote-endpoint = <&edp_out>;
258
+						};
259
+					};   
260
+				};
189
261
 };
190
262
 
191
263
 &combphy0_us {
..
..
@@ -248,6 +320,10 @@
248
320
  * video_phy0 needs to be enabled
249
321
  * when dsi0 is enabled
250
322
  */
323
+&video_phy0 {
324
+	status = "disabled";
325
+};
326
+
251
327
 &dsi0 {
252
328
 	status = "disabled";
253
329
 };
..
..
@@ -268,6 +344,10 @@
268
344
  * video_phy1 needs to be enabled
269
345
  * when dsi1 is enabled
270
346
  */
347
+ 
348
+&video_phy1 {
349
+	status = "okay";
350
+}; 
271
351
 &dsi1 {
272
352
 	status = "disabled";
273
353
 };
..
..
@@ -277,16 +357,40 @@
277
357
 };
278
358
 
279
359
 &dsi1_in_vp1 {
280
-	status = "disabled";
360
+	status = "okay";
281
361
 };
282
362
 
283
363
 &dsi1_panel {
284
-	power-supply = <&vcc3v3_lcd1_n>;
364
+	power-supply = <&vcc3v3_lcd1_n>;   //MIPI_3V3EN_GPIO3_A3_d_3V3
365
+    vddio-mipi = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; //MIPI_EN_1V8_GPIO3_A4_d_3V3
366
+    reset-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>; //MIPI_RST_L_GPIO3_C7
367
+    vcc-5v-gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
368
+    pinctrl-names = "default";
369
+    pinctrl-0 = <&lcd1_rst_gpio>;
285
370
 };
286
371
 
372
+&route_dsi1 {
373
+	status = "disabled";
374
+	connect = <&vp1_out_dsi1>;
375
+};
376
+
377
+
378
+/*
379
+*  edp_start
380
+*/
381
+
287
382
 &edp {
288
-	hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
289
-	status = "okay";
383
+    force-hpd;
384
+    status = "okay";
385
+    ports {
386
+        port@1 {
387
+            reg = <1>;
388
+            edp_out: endpoint {
389
+                remote-endpoint = <&panel_in>;
390
+            };
391
+        };
392
+   
393
+	};
290
394
 };
291
395
 
292
396
 &edp_phy {
..
..
@@ -294,18 +398,67 @@
294
398
 };
295
399
 
296
400
 &edp_in_vp0 {
297
-	status = "okay";
401
+    status = "disabled";
298
402
 };
299
403
 
300
404
 &edp_in_vp1 {
405
+    status = "okay";
406
+
407
+};
408
+
409
+&route_edp {
410
+    status = "okay";
411
+    connect = <&vp1_out_edp>;
412
+};
413
+
414
+&route_edp {
415
+	status = "okay";
416
+};
417
+/*
418
+*  edp_end
419
+*/
420
+
421
+/*
422
+*  Hdmi_start
423
+*/
424
+
425
+&hdmi {
426
+	status = "okay";
427
+	rockchip,phy-table =
428
+		<92812500  0x8009 0x0000 0x0270>,
429
+		<165000000 0x800b 0x0000 0x026d>,
430
+		<185625000 0x800b 0x0000 0x01ed>,
431
+		<297000000 0x800b 0x0000 0x01ad>,
432
+		<594000000 0x8029 0x0000 0x0088>,
433
+		<000000000 0x0000 0x0000 0x0000>;
434
+};
435
+
436
+&route_hdmi {
437
+	status = "okay";
438
+	connect = <&vp0_out_hdmi>;
439
+};
440
+
441
+&hdmi_in_vp0 {
442
+	status = "okay";
443
+};
444
+
445
+&hdmi_in_vp1 {
301
446
 	status = "disabled";
302
447
 };
448
+
449
+&hdmi_sound {
450
+	status = "okay";
451
+};
452
+
453
+/*
454
+ *  Hdmi_END
455
+*/
303
456
 
304
457
 &gmac0 {
305
458
 	phy-mode = "rgmii";
306
459
 	clock_in_out = "output";
307
460
 
308
-	snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
461
+	snps,reset-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
309
462
 	snps,reset-active-low;
310
463
 	/* Reset time is 20ms, 100ms for rtl8211f */
311
464
 	snps,reset-delays-us = <0 20000 100000>;
..
..
@@ -325,7 +478,9 @@
325
478
 	rx_delay = <0x2f>;
326
479
 
327
480
 	phy-handle = <&rgmii_phy0>;
481
+	
328
482
 	status = "disabled";
483
+	
329
484
 };
330
485
 
331
486
 &gmac1 {
..
..
@@ -359,8 +514,22 @@
359
514
  * power-supply should switche to vcc3v3_lcd1_n
360
515
  * when mipi panel is connected to dsi1.
361
516
  */
362
-&gt1x {
363
-	power-supply = <&vcc3v3_lcd0_n>;
517
+
518
+
519
+&i2c3 {
520
+	status = "okay";
521
+       //mac eeprom
522
+        eeprom@51 {
523
+                //compatible = "atmel,24c02";
524
+                compatible = "atmel,24c256";
525
+                reg = <0x51>;
526
+        };
527
+	
528
+	  //nk-mcu
529
+        nkmcu@15 {
530
+                compatible = "nk_mcu";
531
+                reg = <0x15>;
532
+        };
364
533
 };
365
534
 
366
535
 &i2c4 {
..
..
@@ -376,7 +545,6 @@
376
545
 		reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
377
546
 		pwdn-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_LOW>;
378
547
 		rockchip,grf = <&grf>;
379
-		power-domains = <&power RK3568_PD_VI>;
380
548
 		rockchip,camera-module-index = <0>;
381
549
 		rockchip,camera-module-facing = "back";
382
550
 		rockchip,camera-module-name = "RK-CMK-8M-2-v1";
..
..
@@ -433,6 +601,19 @@
433
601
 	};
434
602
 };
435
603
 
604
+&i2c5 {
605
+	status = "okay";
606
+
607
+	hym8563: hym8563@51 {
608
+		compatible = "haoyu,hym8563";
609
+		reg = <0x51>;
610
+		#clock-cells = <0>;
611
+		clock-frequency = <32768>;
612
+		clock-output-names = "xin32k";
613
+		/* rtc_int is not connected */
614
+	};
615
+};
616
+
436
617
 &mdio0 {
437
618
 	rgmii_phy0: phy@0 {
438
619
 		compatible = "ethernet-phy-ieee802.3-c22";
..
..
@@ -447,50 +628,51 @@
447
628
 	};
448
629
 };
449
630
 
450
-&video_phy0 {
451
-	status = "disabled";
452
-};
453
631
 
454
-&video_phy1 {
455
-	status = "disabled";
456
-};
457
632
 
458
633
 &pcie30phy {
459
634
 	status = "okay";
460
635
 };
461
636
 
462
-&pcie3x2 {
463
-	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
637
+&pcie2x1 {
638
+	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
464
639
 	vpcie3v3-supply = <&vcc3v3_pcie>;
465
640
 	status = "okay";
466
641
 };
467
642
 
468
643
 &pinctrl {
469
-	cam {
470
-		camera_pwr: camera-pwr {
471
-			rockchip,pins =
472
-				/* camera power en */
473
-				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
474
-		};
475
-	};
644
+//	cam {
645
+//		camera_pwr: camera-pwr {
646
+//			rockchip,pins =
647
+//				/* camera power en */
648
+//				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
649
+//		};
650
+//	};
476
651
 	headphone {
477
652
 		hp_det: hp-det {
478
-			rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
653
+			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>,
654
+							<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
479
655
 		};
480
656
 	};
481
657
 
482
658
 	wireless-wlan {
483
659
 		wifi_host_wake_irq: wifi-host-wake-irq {
484
-			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
660
+			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
485
661
 		};
486
662
 	};
487
663
 
488
664
 	wireless-bluetooth {
489
-		uart8_gpios: uart8-gpios {
490
-			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
665
+		uart1_gpios: uart1-gpios {
666
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
491
667
 		};
492
668
 	};
493
669
 	
670
+	lcd1 {
671
+        lcd1_rst_gpio: lcd1-rst-gpio {
672
+            rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
673
+        };
674
+    };
675
+		
494
676
 	nk_io_init{
495
677
 		nk_io_gpio: nk-io-gpio{
496
678
 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
..
..
@@ -500,7 +682,7 @@
500
682
 							<4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
501
683
 							<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
502
684
 							<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>,
503
-							<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>, 
685
+							<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
504
686
 							<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
505
687
 							<1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
506
688
 							<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
..
..
@@ -518,10 +700,6 @@
518
700
 	};
519
701
 };
520
702
 
521
-&rk809_sound {
522
-	hp-det-gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
523
-};
524
-
525
703
 &rkisp {
526
704
 	status = "disabled";
527
705
 };
..
..
@@ -531,7 +709,7 @@
531
709
 };
532
710
 
533
711
 &rkisp_vir0 {
534
-	status = "okay";
712
+	status = "disabled";
535
713
 
536
714
 	port {
537
715
 		#address-cells = <1>;
..
..
@@ -544,34 +722,30 @@
544
722
 	};
545
723
 };
546
724
 
547
-&route_dsi0 {
548
-	status = "disabled";
549
-	connect = <&vp1_out_dsi0>;
550
-};
551
725
 
552
-&route_edp {
553
-	status = "okay";
554
-	connect = <&vp0_out_edp>;
555
-};
556
726
 
557
727
 &sata2 {
558
728
 	status = "okay";
559
729
 };
560
730
 
561
731
 &sdmmc2 {
562
-	max-frequency = <150000000>;
563
-	supports-sdio;
564
-	bus-width = <4>;
565
-	disable-wp;
566
-	cap-sd-highspeed;
567
-	cap-sdio-irq;
568
-	keep-power-in-suspend;
569
-	mmc-pwrseq = <&sdio_pwrseq>;
570
-	non-removable;
571
-	pinctrl-names = "default";
572
-	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
573
-	sd-uhs-sdr104;
574
-	status = "okay";
732
+        status = "disabled";
733
+};
734
+
735
+&sdmmc1 {
736
+        max-frequency = <150000000>;
737
+        supports-sdio;
738
+        bus-width = <4>;
739
+        disable-wp;
740
+        cap-sd-highspeed;
741
+        cap-sdio-irq;
742
+        keep-power-in-suspend;
743
+        mmc-pwrseq = <&sdio_pwrseq>;
744
+        non-removable;
745
+        pinctrl-names = "default";
746
+        pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
747
+        sd-uhs-sdr104;
748
+        status = "okay";
575
749
 };
576
750
 
577
751
 &spdif_8ch {
..
..
@@ -581,25 +755,25 @@
581
755
 };
582
756
 
583
757
 &uart8 {
584
-	status = "okay";
758
+	status = "disabled";
585
759
 	pinctrl-names = "default";
586
760
 	pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
587
761
 };
588
762
 
589
763
 &vcc3v3_lcd0_n {
590
-	gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
764
+	gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; 
591
765
 	enable-active-high;
592
766
 };
593
767
 
594
768
 &vcc3v3_lcd1_n {
595
-	gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
769
+	gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; //MIPI_3V3EN_GPIO3_A3_d_3V3
596
770
 	enable-active-high;
597
771
 };
598
772
 
599
773
 &wireless_wlan {
600
774
 	pinctrl-names = "default";
601
775
 	pinctrl-0 = <&wifi_host_wake_irq>;
602
-	WIFI,host_wake_irq = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
776
+	WIFI,host_wake_irq = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
603
777
 };
604
778
 
605
779
 &wireless_bluetooth {
..
..
@@ -607,12 +781,47 @@
607
781
 	clocks = <&rk809 1>;
608
782
 	clock-names = "ext_clock";
609
783
 	//wifi-bt-power-toggle;
610
-	uart_rts_gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
784
+	uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
611
785
 	pinctrl-names = "default", "rts_gpio";
612
-	pinctrl-0 = <&uart8m0_rtsn>;
613
-	pinctrl-1 = <&uart8_gpios>;
614
-	BT,reset_gpio    = <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;
615
-	BT,wake_gpio     = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
616
-	BT,wake_host_irq = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
786
+	pinctrl-0 = <&uart1m0_rtsn>;
787
+	pinctrl-1 = <&uart1_gpios>;
788
+	BT,reset_gpio    = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
789
+    BT,wake_gpio     = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
790
+    BT,wake_host_irq = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
617
791
 	status = "okay";
618
792
 };
793
+
794
+&uart0 {
795
+	status = "okay";
796
+};
797
+
798
+&uart1 {	
799
+	pinctrl-names = "default";	
800
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;	
801
+	status = "okay";		
802
+};
803
+
804
+&uart3 {
805
+	status = "okay";
806
+	pinctrl-0 = <&uart3m1_xfer>;
807
+};
808
+
809
+&uart4 {
810
+	status = "okay";
811
+	pinctrl-0 = <&uart4m1_xfer>;
812
+};
813
+
814
+&uart5 {
815
+	status = "okay";
816
+	pinctrl-0 = <&uart5m1_xfer>;
817
+};
818
+
819
+&uart7 {
820
+	status = "okay";
821
+	pinctrl-0 = <&uart7m1_xfer>;
822
+};
823
+
824
+&uart9 {
825
+	status = "okay";
826
+	pinctrl-0 = <&uart9m1_xfer>;
827
+};