/*
|
* Allwinner Technology CO., Ltd. sun50iw10p1 soc board.
|
*
|
* soc board support.
|
*/
|
|
/dts-v1/;
|
#include "sun50iw10p1.dtsi"
|
#include "dt-bindings/input/linux-event-codes.h"
|
|
/{
|
model = "sun50iw10";
|
compatible = "allwinner,a133", "arm,sun50iw10p1";
|
|
aliases {
|
pmu0 = &pmu0;
|
standby_param = &standby_param;
|
};
|
|
reg_usb1_vbus: usb1-vbus {
|
compatible = "regulator-fixed";
|
gpio = <&r_pio PL 8 1 2 0 1>;
|
regulator-name = "usb1-vbus";
|
regulator-min-microvolt = <5000000>;
|
regulator-max-microvolt = <5000000>;
|
regulator-enable-ramp-delay = <1000>;
|
enable-active-high;
|
};
|
|
soc: soc@03000000 {
|
|
r_pio: pinctrl@07022000 {
|
|
s_twi0_pins_a: s_twi0@0 {
|
allwinner,pins = "PL0", "PL1";
|
allwinner,pname = "s_twi0_scl", "s_twi0_sda";
|
allwinner,function = "s_twi0";
|
allwinner,muxsel = <2>;
|
allwinner,drive = <1>;
|
allwinner,pull = <1>;
|
};
|
|
s_twi0_pins_b: s_twi0@1 {
|
allwinner,pins = "PL0", "PL1";
|
allwinner,function = "io_disabled";
|
allwinner,muxsel = <7>;
|
allwinner,drive = <1>;
|
allwinner,pull = <0>;
|
};
|
};
|
pio: pinctrl@0300b000 {
|
twi0_pins_a: twi0@0 {
|
allwinner,pins = "PD22", "PD23";
|
allwinner,pname = "twi0_scl", "twi0_sda";
|
allwinner,function = "twi0";
|
allwinner,muxsel = <4>;
|
allwinner,drive = <1>;
|
allwinner,pull = <0>;
|
};
|
|
twi0_pins_b: twi0@1 {
|
allwinner,pins = "PD22", "PD23";
|
allwinner,function = "io_disabled";
|
allwinner,muxsel = <7>;
|
allwinner,drive = <1>;
|
allwinner,pull = <0>;
|
};
|
|
twi1_pins_a: twi1@0 {
|
allwinner,pins = "PB4", "PB5";
|
allwinner,pname = "twi1_scl", "twi1_sda";
|
allwinner,function = "twi1";
|
allwinner,muxsel = <2>;
|
allwinner,drive = <1>;
|
allwinner,pull = <0>;
|
};
|
|
twi1_pins_b: twi1@1 {
|
allwinner,pins = "PB4", "PB5";
|
allwinner,function = "io_disabled";
|
allwinner,muxsel = <7>;
|
allwinner,drive = <1>;
|
allwinner,pull = <0>;
|
};
|
|
twi2_pins_a: twi2@0 {
|
allwinner,pins = "PE1", "PE2";
|
allwinner,pname = "twi2_scl", "twi2_sda";
|
allwinner,function = "twi2";
|
allwinner,muxsel = <2>;
|
allwinner,drive = <1>;
|
allwinner,pull = <0>;
|
};
|
|
twi2_pins_b: twi2@1 {
|
allwinner,pins = "PE1", "PE2";
|
allwinner,function = "io_disabled";
|
allwinner,muxsel = <7>;
|
allwinner,drive = <1>;
|
allwinner,pull = <0>;
|
};
|
|
twi3_pins_a: twi3@0 {
|
allwinner,pins = "PH12", "PH13";
|
allwinner,pname = "twi3_scl", "twi3_sda";
|
allwinner,function = "twi3";
|
allwinner,muxsel = <3>;
|
allwinner,drive = <1>;
|
allwinner,pull = <1>;
|
};
|
|
twi3_pins_b: twi3@1 {
|
allwinner,pins = "PH12", "PH13";
|
allwinner,function = "io_disabled";
|
allwinner,muxsel = <7>;
|
allwinner,drive = <1>;
|
allwinner,pull = <0>;
|
};
|
/*
|
pwm0_pin_a: pwm0@0 {
|
//allwinner,pins = "PD23";
|
allwinner,function = "pwm0";
|
allwinner,muxsel = <0x02>;
|
allwinner,drive = <0x2>;
|
allwinner,pull = <0>;
|
allwinner,data = <0xffffffff>;
|
};
|
|
pwm0_pin_b: pwm0@1 {
|
//allwinner,pins = "PD23";
|
allwinner,function = "io_disabled";
|
allwinner,muxsel = <0x07>;
|
allwinner,drive = <0x2>;
|
allwinner,pull = <0>;
|
allwinner,data = <0xffffffff>;
|
};
|
|
pwm1_pin_a: pwm1@0 {
|
//allwinner,pins = "PD22";
|
allwinner,function = "pwm1";
|
allwinner,muxsel = <0x02>;
|
allwinner,drive = <0x2>;
|
allwinner,pull = <0>;
|
allwinner,data = <0xffffffff>;
|
};
|
|
pwm1_pin_b: pwm1@1 {
|
//allwinner,pins = "PD22";
|
allwinner,function = "io_disabled";
|
allwinner,muxsel = <0x07>;
|
allwinner,drive = <0x2>;
|
allwinner,pull = <0>;
|
allwinner,data = <0xffffffff>;
|
};
|
*/
|
pwm2_pin_a: pwm2@0 {
|
allwinner,pins = "PD20";
|
allwinner,function = "pwm2";
|
allwinner,muxsel = <0x03>;
|
allwinner,drive = <0x2>;
|
allwinner,pull = <0>;
|
allwinner,data = <0xffffffff>;
|
};
|
|
pwm2_pin_b: pwm2@1 {
|
allwinner,pins = "PD20";
|
allwinner,function = "io_disabled";
|
allwinner,muxsel = <0x07>;
|
allwinner,drive = <0x2>;
|
allwinner,pull = <0>;
|
allwinner,data = <0xffffffff>;
|
};
|
/*
|
pwm3_pin_a: pwm3@0 {
|
allwinner,pins = "PD21";
|
allwinner,function = "pwm3";
|
allwinner,muxsel = <0x03>;
|
allwinner,drive = <0x2>;
|
allwinner,pull = <0>;
|
allwinner,data = <0xffffffff>;
|
};
|
|
pwm3_pin_b: pwm3@1 {
|
allwinner,pins = "PD21";
|
allwinner,function = "io_disabled";
|
allwinner,muxsel = <0x07>;
|
allwinner,drive = <0x2>;
|
allwinner,pull = <0>;
|
allwinner,data = <0xffffffff>;
|
};
|
*/
|
spi0_pins_a: spi0@0 {
|
// allwinner,pins = "PC2", "PC4", "PC12", "PC15", "PC16";
|
allwinner,pins = "PC2", "PC4", "PC12";
|
// allwinner,pname = "spi0_mosi", "spi0_miso",
|
// "spi0_sclk", "spi0_wp", "spi0_hold";
|
allwinner,pname = "spi0_mosi", "spi0_miso", "spi0_sclk";
|
allwinner,function = "spi0";
|
allwinner,muxsel = <4>;
|
allwinner,drive = <1>;
|
allwinner,pull = <0>;
|
};
|
|
spi0_pins_b: spi0@1 {
|
allwinner,pins = "PC3", "PC7";
|
allwinner,pname = "spi0_cs0", "spi0_cs1";
|
allwinner,function = "spi0";
|
allwinner,muxsel = <4>;
|
allwinner,drive = <1>;
|
allwinner,pull = <1>; /* only CS should be pulled up */
|
};
|
|
spi0_pins_c: spi0@2 {
|
// allwinner,pins = "PC2", "PC3", "PC4", "PC7", "PC12", "PC15", "PC16";
|
allwinner,pins = "PC2", "PC3", "PC4", "PC7", "PC12";
|
allwinner,function = "io_disabled";
|
allwinner,muxsel = <7>;
|
allwinner,drive = <1>;
|
allwinner,pull = <0>;
|
};
|
/*
|
spi1_pins_a: spi1@0 {
|
allwinner,pins = "PD11", "PD12", "PD13";
|
allwinner,pname = "spi1_sclk", "spi1_mosi",
|
"spi1_miso";
|
allwinner,function = "spi1";
|
allwinner,muxsel = <4>;
|
allwinner,drive = <1>;
|
allwinner,pull = <0>;
|
};
|
|
spi1_pins_b: spi1@1 {
|
allwinner,pins = "PD10";
|
allwinner,pname = "spi1_cs0";
|
allwinner,function = "spi1";
|
allwinner,muxsel = <4>;
|
allwinner,drive = <1>;
|
allwinner,pull = <1>; // only CS should be pulled up
|
};
|
|
spi1_pins_c: spi1@2 {
|
allwinner,pins = "PD10", "PD11", "PD12", "PD13";
|
allwinner,function = "io_disabled";
|
allwinner,muxsel = <7>;
|
allwinner,drive = <1>;
|
allwinner,pull = <0>;
|
};
|
|
uart3_pins_a: uart3@0 {
|
allwinner,pins = "PD14", "PD15";
|
allwinner,pname = "uart3_tx", "uart3_rx";
|
allwinner,function = "uart3";
|
allwinner,muxsel = <4>;
|
allwinner,drive = <1>;
|
allwinner,pull = <1>;
|
};
|
|
uart3_pins_b: uart3@1 {
|
allwinner,pins = "PD14", "PD15";
|
allwinner,function = "io_disabled";
|
allwinner,muxsel = <7>;
|
allwinner,drive = <1>;
|
allwinner,pull = <0>;
|
};
|
|
uart4_pins_a: uart4@0 {
|
allwinner,pins = "PD18", "PD19";
|
allwinner,pname = "uart4_tx", "uart4_rx";
|
allwinner,function = "uart4";
|
allwinner,muxsel = <4>;
|
allwinner,drive = <1>;
|
allwinner,pull = <1>;
|
};
|
|
uart4_pins_b: uart4@1 {
|
allwinner,pins = "PD18", "PD19";
|
allwinner,pins = "PD18", "PD19";
|
allwinner,function = "io_disabled";
|
allwinner,muxsel = <7>;
|
allwinner,drive = <1>;
|
allwinner,pull = <0>;
|
};
|
*/
|
};
|
|
twi0: twi@0x05002000{
|
clock-frequency = <400000>;
|
pinctrl-0 = <&twi0_pins_a>;
|
pinctrl-1 = <&twi0_pins_b>;
|
status = "okay";
|
ctp {
|
compatible = "gt9xx_ts";
|
ctp_used = <1>;
|
device_type = "ctp";
|
status = "okay";
|
ctp_twi_id = <0x0>;
|
ctp_name = "gt9xx";
|
reg = <0x5D>;
|
ctp_screen_max_x = <1024>;
|
ctp_screen_max_y = <600>;
|
ctp_revert_x_flag = <0x1>;
|
ctp_revert_y_flag = <0x1>;
|
ctp_exchange_x_y_flag = <0x0>;
|
ctp_int_port = <&pio PE 3 6 0xffffffff 0xffffffff 0>;
|
ctp_wakeup = <&pio PE 4 1 0xffffffff 0xffffffff 1>;
|
ctp_power_ldo = <3300>;
|
ctp_power_ldo_vol = <3300>;
|
ctp_power = <3300>;
|
};
|
};
|
|
spi0: spi@05010000 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
compatible = "allwinner,sun50i-spi";
|
device_type = "spi0";
|
reg = <0x0 0x05010000 0x0 0x1000>;
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clk_pll_periph0>, <&clk_spi0>;
|
clock-frequency = <100000000>;
|
pinctrl-names = "default", "sleep";
|
pinctrl-0 = <&spi0_pins_a &spi0_pins_b>;
|
pinctrl-1 = <&spi0_pins_c>;
|
spi0_cs_number = <1>;
|
spi0_cs_bitmap = <1>;
|
spi_slave_mode = <0>;
|
//status = "okay";
|
status = "disabled";
|
/*
|
spi_uart {
|
compatible = "wkmic,wk2124spi";
|
reg = <0>;
|
spi-max-frequency = <10000000>;
|
//irq_gpio = <&pio PH 11 6 0xffffffff 0xffffffff 0>;
|
};
|
*/
|
|
dh2228@2 {
|
compatible = "rohm,dh2228fv";
|
reg = <0>;
|
spi-max-frequency = <100000>;
|
};
|
|
};
|
/*
|
pwm3: pwm3@0300a000 {
|
pinctrl-names = "active", "sleep";
|
pinctrl-0 = <&pwm3_pin_a>;
|
pinctrl-1 = <&pwm3_pin_b>;
|
status = "disabled";
|
};
|
*/
|
pwm2: pwm2@0300a000 {
|
pinctrl-names = "active", "sleep";
|
pinctrl-0 = <&pwm2_pin_a>;
|
pinctrl-1 = <&pwm2_pin_b>;
|
status = "okay";
|
};
|
|
twi1: twi@0x05002400{
|
clock-frequency = <200000>;
|
pinctrl-0 = <&twi1_pins_a>;
|
pinctrl-1 = <&twi1_pins_b>;
|
status = "okay";
|
// EXTEND GPIO
|
};
|
|
twi2: twi@0x05002800{
|
clock-frequency = <200000>;
|
pinctrl-0 = <&twi2_pins_a>;
|
pinctrl-1 = <&twi2_pins_b>;
|
twi-supply = <®_dldo2>;
|
status = "okay";
|
// CAMERA1
|
|
// CAMERA2
|
};
|
|
twi3: twi@0x05002c00{
|
clock-frequency = <200000>;
|
pinctrl-0 = <&twi3_pins_a>;
|
pinctrl-1 = <&twi3_pins_b>;
|
status = "okay";
|
// RTC
|
pcf8563@51 {
|
compatible = "haoyu,hym8563";
|
reg = <0x51>;
|
interrupt-parent = <&pio>;
|
interrupts = <PB 8 IRQ_TYPE_LEVEL_LOW>;
|
status = "okay";
|
wakeup-source;
|
};
|
};
|
|
twi6: s_twi@0x07081400{
|
clock-frequency = <200000>;
|
pinctrl-0 = <&s_twi0_pins_a>;
|
pinctrl-1 = <&s_twi0_pins_b>;
|
twi_drv_used = <1>;
|
status = "okay";
|
no_suspend = <1>;
|
|
pmu0: pmu@34 {
|
compatible = "x-powers,axp803";
|
reg = <0x34>;
|
status = "okay";
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
interrupt-parent = <&nmi_intc>;
|
x-powers,drive-vbus-en;
|
pmu_reset = <0>;
|
pmu_irq_wakeup = <1>;
|
pmu_hot_shutdown = <1>;
|
|
wakeup-source;
|
|
ac_power_supply: ac-power-supply {
|
compatible = "x-powers,axp803-ac-power-supply";
|
status = "okay";
|
|
pmu_ac_vol = <4600>;
|
pmu_ac_cur = <3000>;
|
|
wakeup_ac_in;
|
wakeup_ac_out;
|
};
|
|
usb_power_supply: usb_power_supply {
|
compatible = "x-powers,axp803-usb-power-supply";
|
status = "okay";
|
|
pmu_usbpc_vol = <4600>;
|
pmu_usbpc_cur = <3000>;
|
pmu_usbad_vol = <4600>;
|
pmu_usbad_cur = <2500>;
|
|
wakeup_usb_in;
|
wakeup_usb_out;
|
};
|
|
battery_power_supply: battery-power-supply {
|
compatible = "x-powers,axp803-battery-power-supply";
|
status = "disabled";
|
|
pmu_chg_ic_temp = <0>;
|
pmu_battery_rdc= <93>;
|
pmu_battery_cap = <5067>;
|
pmu_runtime_chgcur = <1000>;
|
pmu_suspend_chgcur = <2000>;
|
pmu_shutdown_chgcur = <2000>;
|
pmu_init_chgvol = <4200>;
|
pmu_battery_warning_level1 = <15>;
|
pmu_battery_warning_level2 = <0>;
|
pmu_chgled_func = <0>;
|
pmu_chgled_type = <0>;
|
ocv_coulumb_100 = <1>;
|
pmu_bat_para1 = <0>;
|
pmu_bat_para2 = <0>;
|
pmu_bat_para3 = <0>;
|
pmu_bat_para4 = <0>;
|
pmu_bat_para5 = <6>;
|
pmu_bat_para6 = <8>;
|
pmu_bat_para7 = <9>;
|
pmu_bat_para8 = <10>;
|
pmu_bat_para9 = <11>;
|
pmu_bat_para10 = <12>;
|
pmu_bat_para11 = <13>;
|
pmu_bat_para12 = <15>;
|
pmu_bat_para13 = <18>;
|
pmu_bat_para14 = <23>;
|
pmu_bat_para15 = <29>;
|
pmu_bat_para16 = <44>;
|
pmu_bat_para17 = <50>;
|
pmu_bat_para18 = <58>;
|
pmu_bat_para19 = <65>;
|
pmu_bat_para20 = <70>;
|
pmu_bat_para21 = <75>;
|
pmu_bat_para22 = <80>;
|
pmu_bat_para23 = <83>;
|
pmu_bat_para24 = <84>;
|
pmu_bat_para25 = <86>;
|
pmu_bat_para26 = <90>;
|
pmu_bat_para27 = <94>;
|
pmu_bat_para28 = <97>;
|
pmu_bat_para29 = <99>;
|
pmu_bat_para30 = <100>;
|
pmu_bat_para31 = <100>;
|
pmu_bat_para32 = <100>;
|
|
pmu_bat_temp_enable = <0>;
|
pmu_bat_charge_ltf = <1105>;
|
pmu_bat_charge_htf = <121>;
|
pmu_bat_shutdown_ltf = <1381>;
|
pmu_bat_shutdown_htf = <89>;
|
pmu_bat_temp_para1 = <2814>;
|
pmu_bat_temp_para2 = <2202>;
|
pmu_bat_temp_para3 = <1737>;
|
pmu_bat_temp_para4 = <1381>;
|
pmu_bat_temp_para5 = <1105>;
|
pmu_bat_temp_para6 = <890>;
|
pmu_bat_temp_para7 = <722>;
|
pmu_bat_temp_para8 = <484>;
|
pmu_bat_temp_para9 = <332>;
|
pmu_bat_temp_para10 = <233>;
|
pmu_bat_temp_para11 = <196>;
|
pmu_bat_temp_para12 = <166>;
|
pmu_bat_temp_para13 = <141>;
|
pmu_bat_temp_para14 = <121>;
|
pmu_bat_temp_para15 = <89>;
|
pmu_bat_temp_para16 = <66>;
|
|
wakeup_bat_out;
|
/* wakeup_bat_in; */
|
/* wakeup_bat_charging; */
|
/* wakeup_bat_charge_over; */
|
/* wakeup_low_warning1; */
|
/* wakeup_low_warning2; */
|
/* wakeup_bat_untemp_work; */
|
/* wakeup_bat_ovtemp_work; */
|
/* wakeup_bat_untemp_chg; */
|
/* wakeup_bat_ovtemp_chg; */
|
};
|
|
powerkey0: powerkey@0 {
|
status = "okay";
|
compatible = "x-powers,axp2101-pek";
|
pmu_powkey_off_time = <6000>;
|
pmu_powkey_off_func = <0>;
|
pmu_powkey_off_en = <1>;
|
pmu_powkey_long_time = <1500>;
|
pmu_powkey_on_time = <512>;
|
wakeup_rising;
|
wakeup_falling;
|
};
|
|
regulator0: regulators@0 {
|
reg_dcdc1: dcdc1 {
|
regulator-name = "axp803-dcdc1";
|
regulator-min-microvolt = <1600000>;
|
regulator-max-microvolt = <3400000>;
|
regulator-ramp-delay = <250>;
|
regulator-enable-ramp-delay = <1000>;
|
regulator-boot-on;
|
regulator-always-on;
|
};
|
reg_dcdc2: dcdc2 {
|
regulator-name = "axp803-dcdc2";
|
regulator-min-microvolt = <500000>;
|
regulator-max-microvolt = <1300000>;
|
regulator-ramp-delay = <250>;
|
regulator-enable-ramp-delay = <1000>;
|
regulator-boot-on;
|
regulator-always-on;
|
};
|
reg_dcdc3: dcdc3 {
|
regulator-name = "axp803-dcdc3";
|
regulator-min-microvolt = <500000>;
|
regulator-max-microvolt = <1300000>;
|
regulator-ramp-delay = <250>;
|
regulator-enable-ramp-delay = <1000>;
|
regulator-boot-on;
|
regulator-always-on;
|
};
|
reg_dcdc4: dcdc4 {
|
regulator-name = "axp803-dcdc4";
|
regulator-min-microvolt = <500000>;
|
regulator-max-microvolt = <1300000>;
|
regulator-ramp-delay = <250>;
|
regulator-enable-ramp-delay = <1000>;
|
regulator-boot-on;
|
regulator-always-on;
|
};
|
reg_dcdc5: dcdc5 {
|
regulator-name = "axp803-dcdc5";
|
regulator-min-microvolt = <800000>;
|
regulator-max-microvolt = <1840000>;
|
regulator-ramp-delay = <250>;
|
regulator-enable-ramp-delay = <1000>;
|
regulator-always-on;
|
};
|
reg_dcdc6: dcdc6 {
|
regulator-name = "axp803-dcdc6";
|
regulator-min-microvolt = <600000>;
|
regulator-max-microvolt = <1520000>;
|
regulator-ramp-delay = <250>;
|
regulator-enable-ramp-delay = <1000>;
|
};
|
reg_dcdc7: dcdc7 {
|
regulator-name = "axp803-dcdc7";
|
regulator-min-microvolt = <600000>;
|
regulator-max-microvolt = <1520000>;
|
regulator-ramp-delay = <250>;
|
regulator-enable-ramp-delay = <1000>;
|
};
|
reg_rtcldo: rtcldo {
|
/* RTC_LDO is a fixed, always-on regulator */
|
regulator-name = "axp803-rtcldo";
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
regulator-boot-on;
|
regulator-always-on;
|
};
|
reg_aldo1: aldo1 {
|
regulator-name = "axp803-aldo1";
|
regulator-min-microvolt = <700000>;
|
regulator-max-microvolt = <3300000>;
|
regulator-enable-ramp-delay = <1000>;
|
regulator-boot-on;
|
regulator-always-on;
|
};
|
reg_aldo2: aldo2 {
|
regulator-name = "axp803-aldo2";
|
regulator-min-microvolt = <700000>;
|
regulator-max-microvolt = <3300000>;
|
regulator-enable-ramp-delay = <1000>;
|
regulator-always-on;
|
};
|
reg_aldo3: aldo3 {
|
regulator-name = "axp803-aldo3";
|
regulator-min-microvolt = <700000>;
|
regulator-max-microvolt = <3300000>;
|
regulator-enable-ramp-delay = <1000>;
|
regulator-always-on;
|
regulator-boot-on;
|
};
|
reg_dldo1: dldo1 {
|
regulator-name = "axp803-dldo1";
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1900000>;
|
regulator-enable-ramp-delay = <1000>;
|
regulator-always-on;
|
regulator-boot-on;
|
};
|
reg_dldo2: dldo2 {
|
regulator-name = "axp803-dldo2";
|
regulator-min-microvolt = <700000>;
|
regulator-max-microvolt = <4200000>;
|
regulator-enable-ramp-delay = <1000>;
|
regulator-always-on;
|
regulator-boot-on;
|
// kickpi
|
};
|
reg_dldo3: dldo3 {
|
regulator-name = "axp803-dldo3";
|
regulator-min-microvolt = <700000>;
|
regulator-max-microvolt = <3300000>;
|
regulator-enable-ramp-delay = <1000>;
|
};
|
reg_dldo4: dldo4 {
|
regulator-name = "axp803-dldo4";
|
regulator-min-microvolt = <700000>;
|
regulator-max-microvolt = <3300000>;
|
regulator-enable-ramp-delay = <1000>;
|
};
|
reg_eldo1: eldo1 {
|
regulator-name = "axp803-eldo1";
|
regulator-min-microvolt = <700000>;
|
regulator-max-microvolt = <1900000>;
|
regulator-enable-ramp-delay = <1000>;
|
};
|
reg_eldo2: eldo2 {
|
regulator-name = "axp803-eldo2";
|
regulator-min-microvolt = <700000>;
|
regulator-max-microvolt = <1900000>;
|
regulator-enable-ramp-delay = <1000>;
|
};
|
reg_eldo3: eldo3 {
|
regulator-name = "axp803-eldo3";
|
regulator-min-microvolt = <700000>;
|
regulator-max-microvolt = <1900000>;
|
regulator-enable-ramp-delay = <1000>;
|
regulator-always-on;
|
regulator-boot-on;
|
// kickpi
|
};
|
reg_fldo1: fldo1 {
|
regulator-name = "axp803-fldo1";
|
regulator-min-microvolt = <700000>;
|
regulator-max-microvolt = <1450000>;
|
regulator-enable-ramp-delay = <1000>;
|
regulator-always-on;
|
};
|
reg_fldo2: fldo2 {
|
regulator-name = "axp803-fldo2";
|
regulator-min-microvolt = <700000>;
|
regulator-max-microvolt = <1450000>;
|
regulator-enable-ramp-delay = <1000>;
|
};
|
reg_ldoio0: ldoio0 {
|
regulator-name = "axp803-ldoio0";
|
regulator-min-microvolt = <700000>;
|
regulator-max-microvolt = <3300000>;
|
regulator-enable-ramp-delay = <1000>;
|
regulator-boot-on;
|
regulator-always-on;
|
};
|
reg_ldoio1: ldoio1 {
|
regulator-name = "axp803-ldoio1";
|
regulator-min-microvolt = <700000>;
|
regulator-max-microvolt = <3300000>;
|
regulator-enable-ramp-delay = <1000>;
|
};
|
reg_dc1sw: dc1sw {
|
regulator-name = "axp803-dc1sw";
|
regulator-enable-ramp-delay = <1000>;
|
};
|
reg_drivevbus: drivevbus {
|
regulator-name = "axp803-drivevbus";
|
regulator-enable-ramp-delay = <1000>;
|
};
|
};
|
|
virtual-dcdc1 {
|
compatible = "xpower-vregulator,dcdc1";
|
dcdc1-supply = <®_dcdc1>;
|
};
|
virtual-dcdc2 {
|
compatible = "xpower-vregulator,dcdc2";
|
dcdc2-supply = <®_dcdc2>;
|
};
|
virtual-dcdc3 {
|
compatible = "xpower-vregulator,dcdc3";
|
dcdc3-supply = <®_dcdc3>;
|
};
|
virtual-dcdc4 {
|
compatible = "xpower-vregulator,dcdc4";
|
dcdc4-supply = <®_dcdc4>;
|
};
|
virtual-dcdc5 {
|
compatible = "xpower-vregulator,dcdc5";
|
dcdc5-supply = <®_dcdc5>;
|
};
|
virtual-dcdc6 {
|
compatible = "xpower-vregulator,dcdc6";
|
dcdc6-supply = <®_dcdc6>;
|
};
|
virtual-dcdc7 {
|
compatible = "xpower-vregulator,dcdc7";
|
dcdc7-supply = <®_dcdc7>;
|
};
|
virtual-rtcldo {
|
compatible = "xpower-vregulator,rtcldo";
|
rtcldo-supply = <®_rtcldo>;
|
};
|
virtual-aldo1 {
|
compatible = "xpower-vregulator,aldo1";
|
aldo1-supply = <®_aldo1>;
|
};
|
virtual-aldo2 {
|
compatible = "xpower-vregulator,aldo2";
|
aldo2-supply = <®_aldo2>;
|
};
|
virtual-aldo3 {
|
compatible = "xpower-vregulator,aldo3";
|
aldo3-supply = <®_aldo3>;
|
};
|
virtual-dldo1 {
|
compatible = "xpower-vregulator,dldo1";
|
dldo1-supply = <®_dldo1>;
|
};
|
virtual-dldo2 {
|
compatible = "xpower-vregulator,dldo2";
|
dldo2-supply = <®_dldo2>;
|
};
|
virtual-dldo3 {
|
compatible = "xpower-vregulator,dldo3";
|
dldo3-supply = <®_dldo3>;
|
};
|
virtual-dldo4 {
|
compatible = "xpower-vregulator,dldo4";
|
dldo4-supply = <®_dldo4>;
|
};
|
virtual-eldo1 {
|
compatible = "xpower-vregulator,eldo1";
|
eldo1-supply = <®_eldo1>;
|
};
|
virtual-eldo2 {
|
compatible = "xpower-vregulator,eldo2";
|
eldo2-supply = <®_eldo2>;
|
};
|
virtual-eldo3 {
|
compatible = "xpower-vregulator,eldo3";
|
eldo3-supply = <®_eldo3>;
|
};
|
virtual-fldo1 {
|
compatible = "xpower-vregulator,fldo1";
|
fldo1-supply = <®_fldo1>;
|
};
|
virtual-fldo2 {
|
compatible = "xpower-vregulator,fldo2";
|
fldo2-supply = <®_fldo2>;
|
};
|
virtual-ldoio0 {
|
compatible = "xpower-vregulator,ldoio0";
|
ldoio0-supply = <®_ldoio0>;
|
};
|
virtual-ldoio1 {
|
compatible = "xpower-vregulator,ldoio1";
|
ldoio1-supply = <®_ldoio1>;
|
};
|
virtual-dc1sw {
|
compatible = "xpower-vregulator,dc1sw";
|
dc1sw-supply = <®_dc1sw>;
|
};
|
virtual-drivevbus {
|
compatible = "xpower-vregulator,drivevbus";
|
drivevbus-supply = <®_drivevbus>;
|
};
|
|
axp_gpio0: axp_gpio@0 {
|
gpio-controller;
|
#size-cells = <0>;
|
#gpio-cells = <6>;
|
status = "disabled";
|
};
|
};
|
};
|
|
standby_param: standby_param {
|
vdd-cpu = <0x00000006>;
|
vdd-sys = <0x00000008>;
|
vcc-pll = <0x00000100>;
|
|
osc24m-on = <0x1>;
|
};
|
/*
|
pwm0: pwm0@0300a000 {
|
pinctrl-names = "active", "sleep";
|
pinctrl-0 = <&pwm0_pin_a>;
|
pinctrl-1 = <&pwm0_pin_b>;
|
};
|
|
spi1: spi@05011000 {
|
pinctrl-0 = <&spi1_pins_a &spi1_pins_b>;
|
pinctrl-1 = <&spi1_pins_c>;
|
spi_slave_mode = <0>;
|
status = "disabled";
|
};
|
|
spi2: spi@05012000 {
|
pinctrl-0 = <&spi2_pins_a &spi2_pins_b>;
|
pinctrl-1 = <&spi2_pins_c>;
|
spi_slave_mode = <0>;
|
status = "disabled";
|
};
|
*/
|
gpadc:gpadc{
|
channel_num = <1>;
|
channel_select = <0x01>;
|
channel_data_select = <0>;
|
channel_compare_select = <0x01>;
|
channel_cld_select = <0x01>;
|
channel_chd_select = <0>;
|
channel0_compare_lowdata = <1700000>;
|
channel0_compare_higdata = <1200000>;
|
status = "disabled";
|
};
|
|
sdc2: sdmmc@04022000 {
|
non-removable;
|
bus-width = <8>;
|
mmc-ddr-1_8v;
|
mmc-hs200-1_8v;
|
mmc-hs400-1_8v;
|
no-sdio;
|
no-sd;
|
ctl-spec-caps = <0x308>;
|
cap-mmc-highspeed;
|
sunxi-power-save-mode;
|
sunxi-dis-signal-vol-sw;
|
max-frequency = <100000000>;
|
vmmc-supply = <®_dcdc1>;
|
/*emmc io vol 3.3v*/
|
/*vqmmc-supply = <®_aldo1>;*/
|
/*emmc io vol 1.8v*/
|
vqmmc-supply = <®_eldo1>;
|
status = "disabled";
|
};
|
|
sdc0: sdmmc@04020000 {
|
bus-width = <4>;
|
/*non-removable;*/
|
/*broken-cd;*/
|
/*cd-inverted*/
|
/*data3-detect;*/
|
cd-used-24M;
|
cd-gpios = <&pio PF 6 6 1 3 0xffffffff>;
|
cap-sd-highspeed;
|
sd-uhs-sdr50;
|
sd-uhs-ddr50;
|
sd-uhs-sdr104;
|
no-sdio;
|
no-mmc;
|
sunxi-power-save-mode;
|
/*sunxi-dis-signal-vol-sw;*/
|
max-frequency = <150000000>;
|
ctl-spec-caps = <0x8>;
|
vmmc-supply = <®_dcdc1>;
|
vqmmc33sw-supply = <®_dcdc1>;
|
vdmmc33sw-supply = <®_dcdc1>;
|
vqmmc18sw-supply = <®_eldo1>;
|
vdmmc18sw-supply = <®_eldo1>;
|
status = "okay";
|
};
|
|
/*
|
*usb_port_type: usb mode. 0-device, 1-host, 2-otg.
|
*usb_detect_type: usb hotplug detect mode. 0-none, 1-vbus/id detect, 2-id/dpdm detect.
|
*usb_id_gpio: gpio for id detect.
|
*usb_det_vbus_gpio: gpio for id detect. gpio or "axp_ctrl";
|
*usb_wakeup_suspend：0-SUPER_STANDBY, 1-USB_STANDBY.
|
*/
|
usbc0:usbc0@0 {
|
device_type = "usbc0";
|
usb_port_type = <0x0>;
|
usb_detect_type = <0x1>;
|
usb_id_gpio = <&r_pio PL 9 0 0 0xffffffff 0xffffffff>;
|
usb_det_vbus_gpio = "axp_ctrl";
|
usb_regulator_io = "nocare";
|
det_vbus_supply = <&usb_power_supply>;
|
usb_wakeup_suspend = <1>;
|
usb_serial_unique = <0>;
|
usb_serial_number = "20080411";
|
rndis_wceis = <1>;
|
status = "okay";
|
};
|
|
udc:udc-controller@0x05100000 {
|
det_vbus_supply = <&usb_power_supply>;
|
};
|
|
ehci0:ehci0-controller@0x05101000 {
|
drvvbus-supply = <®_drivevbus>;
|
};
|
|
ohci0:ohci0-controller@0x05101400 {
|
drvvbus-supply = <®_drivevbus>;
|
};
|
|
usbc1:usbc1@0 {
|
device_type = "usbc1";
|
usb_regulator_io = "nocare";
|
usb_wakeup_suspend = <0>;
|
status = "okay";
|
};
|
|
ehci1:ehci1-controller@0x05200000 {
|
drvvbus-supply = <®_usb1_vbus>;
|
};
|
|
ohci1:ohci1-controller@0x05200400 {
|
drvvbus-supply = <®_usb1_vbus>;
|
};
|
|
sdc1: sdmmc@04021000 {
|
bus-width = <4>;
|
no-mmc;
|
no-sd;
|
cap-sd-highspeed;
|
/*sd-uhs-sdr12*/
|
/*sd-uhs-sdr25*/
|
sd-uhs-sdr50;
|
sd-uhs-ddr50;
|
sd-uhs-sdr104;
|
// kickpi
|
//sunxi-power-save-mode;
|
/*sunxi-dis-signal-vol-sw;*/
|
sdio-used-1v8;
|
cap-sdio-irq;
|
keep-power-in-suspend;
|
ignore-pm-notify;
|
max-frequency = <50000000>;
|
ctl-spec-caps = <0x8>;
|
status = "okay";
|
|
};
|
|
/* gpio-spk will output 0x00 when playing audio */
|
/* Audio Driver Modules */
|
codec:codec@0x05096000 {
|
/* MIC and headphone gain setting */
|
mic1gain = <0x1F>;
|
mic2gain = <0x1F>;
|
/* ADC/DAC DRC/HPF func enabled */
|
/* 0x1:DAP_HP_EN; 0x2:DAP_SPK_EN; 0x3:DAP_HPSPK_EN */
|
adcdrc_cfg = <0x2>;
|
adchpf_cfg = <0x1>;
|
dacdrc_cfg = <0x2>;
|
dachpf_cfg = <0x0>;
|
/* Volume about */
|
digital_vol = <0x00>;
|
lineout_vol = <0x1a>;
|
headphonegain = <0x00>;
|
/* Pa enabled about */
|
pa_level = <0x01>;
|
pa_msleep_time = <0x78>;
|
gpio-spk = <&pio PB 7 1 1 1 1>;
|
/* regulator about */
|
avcc-supply = <®_aldo1>;
|
cpvin-supply = <®_eldo1>;
|
status = "okay";
|
};
|
|
sndcodec:sound@0 {
|
noheadphonemic = <1>;
|
status = "okay";
|
};
|
|
spdif:spdif-controller@0x05094000{
|
status = "okay";
|
};
|
|
sndspdif:sound@1{
|
status = "okay";
|
};
|
|
dmic:dmic-controller@0x05095000{
|
status = "disabled";
|
};
|
|
snddmic:sound@2{
|
status = "disabled";
|
};
|
|
daudio0:daudio@0x05090000 {
|
mclk_div = <0x01>;
|
frametype = <0x00>;
|
tdm_config = <0x01>;
|
sign_extend = <0x00>;
|
tx_data_mode = <0x00>;
|
rx_data_mode = <0x00>;
|
msb_lsb_first = <0x00>;
|
pcm_lrck_period = <0x80>;
|
audio_format = <0x01>;
|
daudio_master = <0x04>;
|
signal_inversion = <0x01>;
|
slot_width_select = <0x20>;
|
status = "okay";
|
};
|
|
snddaudio0:sound@3 {
|
/* sunxi,snddaudio-codec = "ac108.1-003b";
|
sunxi,snddaudio-codec-dai = "ac108-pcm0";*/
|
|
/* sunxi,snddaudio-codec = "ac107.1-0036";
|
sunxi,snddaudio-codec-dai = "ac107-pcm0"; */
|
status = "okay";
|
};
|
|
daudio1:daudio@0x05091000 {
|
mclk_div = <0x01>;
|
frametype = <0x00>;
|
tdm_config = <0x01>;
|
sign_extend = <0x00>;
|
tx_data_mode = <0x00>;
|
rx_data_mode = <0x00>;
|
msb_lsb_first = <0x00>;
|
pcm_lrck_period = <0x80>;
|
audio_format = <0x01>;
|
daudio_master = <0x04>;
|
signal_inversion = <0x01>;
|
slot_width_select = <0x20>;
|
status = "disabled";
|
};
|
|
snddaudio1:sound@4 {
|
status = "disabled";
|
};
|
|
daudio2:daudio@0x05092000 {
|
mclk_div = <0x01>;
|
frametype = <0x00>;
|
tdm_config = <0x01>;
|
sign_extend = <0x00>;
|
tx_data_mode = <0x00>;
|
rx_data_mode = <0x00>;
|
msb_lsb_first = <0x00>;
|
pcm_lrck_period = <0x80>;
|
audio_format = <0x01>;
|
daudio_master = <0x04>;
|
signal_inversion = <0x01>;
|
slot_width_select = <0x20>;
|
status = "disabled";
|
};
|
|
snddaudio2:sound@5 {
|
status = "disabled";
|
};
|
|
daudio3:daudio@0x05093000 {
|
mclk_div = <0x01>;
|
frametype = <0x00>;
|
tdm_config = <0x01>;
|
sign_extend = <0x00>;
|
tx_data_mode = <0x00>;
|
rx_data_mode = <0x00>;
|
msb_lsb_first = <0x00>;
|
pcm_lrck_period = <0x80>;
|
audio_format = <0x01>;
|
daudio_master = <0x04>;
|
signal_inversion = <0x01>;
|
slot_width_select = <0x20>;
|
status = "disabled";
|
};
|
|
snddaudio3:sound@6 {
|
status = "disabled";
|
};
|
|
vind0:vind@0 {
|
vind0_clk = <336000000>;
|
vind0_isp = <300000000>;
|
status = "disabled";
|
|
actuator0:actuator@0 {
|
device_type = "actuator0";
|
actuator0_name = "ad5820_act";
|
actuator0_slave = <0x18>;
|
actuator0_af_pwdn = <>;
|
actuator0_afvdd = "afvcc-csi";
|
actuator0_afvdd_vol = <2800000>;
|
status = "disabled";
|
};
|
flash0:flash@0 {
|
device_type = "flash0";
|
flash0_type = <2>;
|
flash0_en = <&r_pio PL 11 1 0 1 0>;
|
flash0_mode = <>;
|
flash0_flvdd = "";
|
flash0_flvdd_vol = <>;
|
device_id = <0>;
|
status = "disabled";
|
};
|
sensor0:sensor@0 {
|
device_type = "sensor0";
|
sensor1_mname = "ov8858_r2a_4lane";
|
sensor0_twi_cci_id = <2>;
|
sensor0_twi_addr = <0x6c>;
|
//sensor0_twi_addr = <0x20>;
|
|
sensor0_mclk_id = <0>;
|
sensor0_pos = "rear";
|
sensor0_isp_used = <1>;
|
sensor0_fmt = <1>;
|
sensor0_stby_mode = <0>;
|
sensor0_vflip = <0>;
|
sensor0_hflip = <0>;
|
sensor0_iovdd-supply = <®_dldo2>;
|
sensor0_iovdd_vol = <1800000>;
|
sensor0_avdd-supply = <®_dldo3>;
|
sensor0_avdd_vol = <2800000>;
|
sensor0_dvdd-supply = <®_eldo2>;
|
sensor0_dvdd_vol = <1200000>;
|
sensor0_power_en = <>;
|
sensor0_reset = <&pio PE 6 1 0 1 0>;
|
sensor0_pwdn = <&pio PE 7 1 0 1 0>;
|
status = "okay";
|
};
|
sensor1:sensor@1 {
|
device_type = "sensor1";
|
sensor1_mname = "ov5648_mipi";
|
sensor1_twi_cci_id = <3>;
|
sensor1_twi_addr = <0x6c>;
|
sensor1_mclk_id = <1>;
|
sensor1_pos = "front";
|
sensor1_isp_used = <1>;
|
sensor1_fmt = <1>;
|
sensor1_stby_mode = <0>;
|
sensor1_vflip = <0>;
|
sensor1_hflip = <0>;
|
sensor1_iovdd-supply = <®_dldo2>;
|
sensor1_iovdd_vol = <1800000>;
|
sensor1_avdd-supply = <®_dldo3>;
|
sensor1_avdd_vol = <2800000>;
|
sensor1_dvdd-supply = <®_eldo2>;
|
sensor1_dvdd_vol = <1500000>;
|
sensor1_power_en = <>;
|
sensor1_reset = <&pio PE 8 1 0 1 0>;
|
sensor1_pwdn = <&pio PE 9 1 0 1 0>;
|
status = "okay";
|
};
|
|
vinc0:vinc@0 {
|
vinc0_csi_sel = <0>;
|
vinc0_mipi_sel = <0>;
|
vinc0_isp_sel = <0>;
|
vinc0_isp_tx_ch = <0>;
|
vinc0_tdm_rx_sel = <0xff>;
|
vinc0_rear_sensor_sel = <0>;
|
vinc0_front_sensor_sel = <1>;
|
vinc0_sensor_list = <0>;
|
status = "okay";
|
};
|
vinc1:vinc@1 {
|
vinc1_csi_sel = <0>;
|
vinc1_mipi_sel = <0>;
|
vinc1_isp_sel = <0>;
|
vinc1_isp_tx_ch = <0>;
|
vinc1_tdm_rx_sel = <0xff>;
|
vinc1_rear_sensor_sel = <0>;
|
vinc1_front_sensor_sel = <1>;
|
vinc1_sensor_list = <0>;
|
status = "okay";
|
};
|
vinc2:vinc@2 {
|
vinc2_csi_sel = <1>;
|
vinc2_mipi_sel = <1>;
|
vinc2_isp_sel = <0>;
|
vinc2_isp_tx_ch = <0>;
|
vinc2_tdm_rx_sel = <0xff>;
|
vinc2_rear_sensor_sel = <0>;
|
vinc2_front_sensor_sel = <1>;
|
vinc2_sensor_list = <0>;
|
status = "okay";
|
};
|
vinc3:vinc@3 {
|
vinc3_csi_sel = <1>;
|
vinc3_mipi_sel = <1>;
|
vinc3_isp_sel = <0>;
|
vinc3_isp_tx_ch = <0>;
|
vinc3_tdm_rx_sel = <0xff>;
|
vinc3_rear_sensor_sel = <0>;
|
vinc3_front_sensor_sel = <1>;
|
vinc3_sensor_list = <0>;
|
status = "okay";
|
};
|
};
|
|
/*
|
hall_para {
|
hall_name = "MH248";
|
status = "disabled";
|
hall_int_port = <&r_pio PL 9 6 1 0xffffffff 0xffffffff>;
|
};
|
*/
|
keyboard {
|
compatible = "allwinner,keyboard_1350mv";
|
status = "okay";
|
key_cnt = <1>;
|
key0 = <590 KEY_RESERVED>;
|
//key0 = <475 0x7372>;
|
//key1 = <646 0x73>;
|
//key2 = <897 0x72>;
|
};
|
|
wlan: wlan@0 {
|
compatible = "allwinner,sunxi-wlan";
|
clocks;
|
pinctrl-0;
|
pinctrl-names;
|
wlan_busnum = <0x1>;
|
wlan_power = "axp803-dldo1";
|
wlan_io_regulator;
|
wlan_regon = <&pio PG 10 1 0xffffffff 0xffffffff 1>;
|
wlan_hostwake = <&pio PG 13 6 0xffffffff 0xffffffff 0>;
|
//chip_en;
|
//power_en = <&pio PG 10 1 0xffffffff 0xffffffff 0>;
|
status = "okay";
|
};
|
|
bt: bt@0 {
|
compatible = "allwinner,sunxi-bt";
|
clocks = <&clk_losc_out>, <&clk_dcxo_out>;
|
bt_power = "axp803-dldo1";
|
bt_io_regulator;
|
bt_rst_n = <&r_pio PH 11 1 0xffffffff 0xffffffff 0>;
|
status = "okay";
|
};
|
|
btlpm: btlpm@0 {
|
compatible = "allwinner,sunxi-btlpm";
|
uart_index = <0x1>;
|
bt_wake = <&pio PG 12 1 0xffffffff 0xffffffff 1>;
|
bt_hostwake = <&pio PG 11 6 0xffffffff 0xffffffff 1>;
|
status = "okay";
|
};
|
|
/*
|
wlan: wlan@0 {
|
compatible = "allwinner,sunxi-wlan";
|
clocks = <&clk_losc_out>, <&clk_dcxo_out>;
|
pinctrl-0;
|
pinctrl-names;
|
wlan_busnum = <0x1>;
|
wlan_power = "axp803-dldo1";
|
wlan_io_regulator;
|
wlan_regon = <&pio PG 10 1 0xffffffff 0xffffffff 0>;
|
wlan_hostwake = <&pio PG 13 6 0xffffffff 0xffffffff 0>;
|
chip_en;
|
power_en;
|
status = "okay";
|
};
|
|
bt: bt@0 {
|
compatible = "allwinner,sunxi-bt";
|
clocks = <&clk_losc_out>, <&clk_dcxo_out>;
|
bt_power = "axp803-dldo1";
|
//bt_power = "axp803-dldo1";
|
bt_io_regulator;
|
//bt_rst_n = <&r_pio PL 2 1 0xffffffff 0xffffffff 0>;
|
status = "okay";
|
};
|
|
btlpm: btlpm@0 {
|
compatible = "allwinner,sunxi-btlpm";
|
uart_index = <0x1>;
|
bt_wake = <&pio PG 11 1 0xffffffff 0xffffffff 1>;
|
bt_hostwake = <&pio PG 12 6 0xffffffff 0xffffffff 1>;
|
status = "okay";
|
};
|
*/
|
addr_mgt: addr_mgt@0 {
|
compatible = "allwinner,sunxi-addr_mgt";
|
type_addr_wifi = <0x0>;
|
type_addr_bt = <0x0>;
|
type_addr_eth = <0x0>;
|
status = "okay";
|
};
|
uart0: uart@05000000 {
|
uart-supply = <®_dcdc1>;
|
};
|
|
uart1: uart@05000400 {
|
status = "okay";
|
};
|
|
uart2: uart@05000800 {
|
status = "okay";
|
};
|
|
uart3: uart@05000c00 {
|
status = "okay";
|
};
|
|
uart4: uart@05001000 {
|
status = "okay";
|
};
|
};
|
gpu: gpu@0x01800000 {
|
gpu_idle = <1>;/*ic version ctrl*/
|
dvfs_status = <1>;
|
pll_rate = <504000>;
|
independent_power = <0>;
|
operating-points = <
|
/* KHz uV */
|
504000 950000
|
472500 950000
|
441000 950000
|
252000 950000
|
>;
|
gpu-supply = <®_dcdc4>;
|
};
|
|
leds {
|
compatible = "gpio-leds";
|
pinctrl-names = "default";
|
status = "okay";
|
|
sysled {
|
label = "sysled";
|
gpios = <&r_pio PL 10 1 0 1 1>;
|
linux,default_trigger = "heartbeat";
|
};
|
|
// spk_en {
|
// label = "spk_en";
|
// gpios = <&pio PB 7 1 0 1 0>;
|
// linux,default_trigger = "default-on";
|
// };
|
|
fan_en {
|
label = "fan_en";
|
gpios = <&r_pio PL 7 1 0 1 0>;
|
linux,default_trigger = "default-on";
|
};
|
|
PH8 {
|
label = "PH8";
|
gpios = <&pio PH 8 1 0 1 0>;
|
linux,default_trigger = "default-on";
|
};
|
|
PC2 {
|
label = "PC2";
|
gpios = <&pio PC 2 1 0 1 0>;
|
linux,default_trigger = "default-on";
|
};
|
|
PC3 {
|
label = "PC3";
|
gpios = <&pio PC 3 1 0 1 0>;
|
linux,default_trigger = "default-on";
|
};
|
|
PC4 {
|
label = "PC4";
|
gpios = <&pio PC 4 1 0 1 0>;
|
linux,default_trigger = "default-on";
|
};
|
|
PC7 {
|
label = "PC7";
|
gpios = <&pio PC 7 1 0 1 0>;
|
linux,default_trigger = "default-on";
|
};
|
|
PC12 {
|
label = "PC12";
|
gpios = <&pio PC 12 1 0 1 0>;
|
linux,default_trigger = "default-on";
|
};
|
|
};
|
};
|
|
&cpu0 {
|
cpu-supply = <®_dcdc2>;
|
};
|
|
&s_cir0 {
|
status = "okay";
|
|
pinctrl-names = "default", "sleep";
|
pinctrl-0 = <&s_cir0_pins_a>;
|
pinctrl-1 = <&s_cir0_pins_a>;
|
|
s_cir0_used = <1>;
|
ir_power_key_code0 = <0x4d>;
|
ir_addr_code0 = <0x4040>;
|
ir_power_key_code1 = <0x51>;
|
ir_addr_code1 = <0x7f80>;
|
ir_power_key_code2 = <0x1c>;
|
ir_addr_code2 = <0xdf00>;
|
wakeup-source;
|
};
|
|
|
&gmac0 {
|
/delete-property/ phy-rst;
|
rx-delay = <7>;
|
};
|
|
|
#include "lcd-lvds-7-1024-600.dtsi"
|
//#include "lcd-lvds-21-1920-1080.dtsi"
|
//#include "lcd-mipi-10-800-1280-v1.dtsi"
|
//#include "lcd-mipi-10-800-1280-v2.dtsi"
|
//#include "lcd-mipi-8-800-1280.dtsi"
|
//#include "lcd-mipi-5-720-1280.dtsi"
|
