/**************************************************************************
|
*
|
* Copyright (c) 2000-2002 Alacritech, Inc. All rights reserved.
|
*
|
*
|
* Redistribution and use in source and binary forms, with or without
|
* modification, are permitted provided that the following conditions
|
* are met:
|
*
|
* 1. Redistributions of source code must retain the above copyright
|
* notice, this list of conditions and the following disclaimer.
|
* 2. Redistributions in binary form must reproduce the above
|
* copyright notice, this list of conditions and the following
|
* disclaimer in the documentation and/or other materials provided
|
* with the distribution.
|
*
|
* THIS SOFTWARE IS PROVIDED BY ALACRITECH, INC. ``AS IS'' AND ANY
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ALACRITECH, INC. OR
|
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
* SUCH DAMAGE.
|
*
|
* The views and conclusions contained in the software and documentation
|
* are those of the authors and should not be interpreted as representing
|
* official policies, either expressed or implied, of Alacritech, Inc.
|
*
|
**************************************************************************/
|
|
/*
|
* FILENAME: slichw.h
|
*
|
* This header file contains definitions that are common to our hardware.
|
*/
|
#ifndef __SLICHW_H__
|
#define __SLICHW_H__
|
|
#define PCI_VENDOR_ID_ALACRITECH 0x139A
|
#define SLIC_1GB_DEVICE_ID 0x0005
|
#define SLIC_2GB_DEVICE_ID 0x0007 /* Oasis Device ID */
|
|
#define SLIC_1GB_CICADA_SUBSYS_ID 0x0008
|
|
#define SLIC_NBR_MACS 4
|
|
#define SLIC_RCVBUF_SIZE 2048
|
#define SLIC_RCVBUF_HEADSIZE 34
|
#define SLIC_RCVBUF_TAILSIZE 0
|
#define SLIC_RCVBUF_DATASIZE (SLIC_RCVBUF_SIZE - \
|
(SLIC_RCVBUF_HEADSIZE + \
|
SLIC_RCVBUF_TAILSIZE))
|
|
#define VGBSTAT_XPERR 0x40000000
|
#define VGBSTAT_XERRSHFT 25
|
#define VGBSTAT_XCSERR 0x23
|
#define VGBSTAT_XUFLOW 0x22
|
#define VGBSTAT_XHLEN 0x20
|
#define VGBSTAT_NETERR 0x01000000
|
#define VGBSTAT_NERRSHFT 16
|
#define VGBSTAT_NERRMSK 0x1ff
|
#define VGBSTAT_NCSERR 0x103
|
#define VGBSTAT_NUFLOW 0x102
|
#define VGBSTAT_NHLEN 0x100
|
#define VGBSTAT_LNKERR 0x00000080
|
#define VGBSTAT_LERRMSK 0xff
|
#define VGBSTAT_LDEARLY 0x86
|
#define VGBSTAT_LBOFLO 0x85
|
#define VGBSTAT_LCODERR 0x84
|
#define VGBSTAT_LDBLNBL 0x83
|
#define VGBSTAT_LCRCERR 0x82
|
#define VGBSTAT_LOFLO 0x81
|
#define VGBSTAT_LUFLO 0x80
|
#define IRHDDR_FLEN_MSK 0x0000ffff
|
#define IRHDDR_SVALID 0x80000000
|
#define IRHDDR_ERR 0x10000000
|
#define VRHSTAT_802OE 0x80000000
|
#define VRHSTAT_TPOFLO 0x10000000
|
#define VRHSTATB_802UE 0x80000000
|
#define VRHSTATB_RCVE 0x40000000
|
#define VRHSTATB_BUFF 0x20000000
|
#define VRHSTATB_CARRE 0x08000000
|
#define VRHSTATB_LONGE 0x02000000
|
#define VRHSTATB_PREA 0x01000000
|
#define VRHSTATB_CRC 0x00800000
|
#define VRHSTATB_DRBL 0x00400000
|
#define VRHSTATB_CODE 0x00200000
|
#define VRHSTATB_TPCSUM 0x00100000
|
#define VRHSTATB_TPHLEN 0x00080000
|
#define VRHSTATB_IPCSUM 0x00040000
|
#define VRHSTATB_IPLERR 0x00020000
|
#define VRHSTATB_IPHERR 0x00010000
|
#define SLIC_MAX64_BCNT 23
|
#define SLIC_MAX32_BCNT 26
|
#define IHCMD_XMT_REQ 0x01
|
#define IHFLG_IFSHFT 2
|
#define SLIC_RSPBUF_SIZE 32
|
|
#define SLIC_RESET_MAGIC 0xDEAD
|
#define ICR_INT_OFF 0
|
#define ICR_INT_ON 1
|
#define ICR_INT_MASK 2
|
|
#define ISR_ERR 0x80000000
|
#define ISR_RCV 0x40000000
|
#define ISR_CMD 0x20000000
|
#define ISR_IO 0x60000000
|
#define ISR_UPC 0x10000000
|
#define ISR_LEVENT 0x08000000
|
#define ISR_RMISS 0x02000000
|
#define ISR_UPCERR 0x01000000
|
#define ISR_XDROP 0x00800000
|
#define ISR_UPCBSY 0x00020000
|
#define ISR_EVMSK 0xffff0000
|
#define ISR_PINGMASK 0x00700000
|
#define ISR_PINGDSMASK 0x00710000
|
#define ISR_UPCMASK 0x11000000
|
#define SLIC_WCS_START 0x80000000
|
#define SLIC_WCS_COMPARE 0x40000000
|
#define SLIC_RCVWCS_BEGIN 0x40000000
|
#define SLIC_RCVWCS_FINISH 0x80000000
|
#define SLIC_PM_MAXPATTERNS 6
|
#define SLIC_PM_PATTERNSIZE 128
|
#define SLIC_PMCAPS_WAKEONLAN 0x00000001
|
#define MIICR_REG_PCR 0x00000000
|
#define MIICR_REG_4 0x00040000
|
#define MIICR_REG_9 0x00090000
|
#define MIICR_REG_16 0x00100000
|
#define PCR_RESET 0x8000
|
#define PCR_POWERDOWN 0x0800
|
#define PCR_SPEED_100 0x2000
|
#define PCR_SPEED_1000 0x0040
|
#define PCR_AUTONEG 0x1000
|
#define PCR_AUTONEG_RST 0x0200
|
#define PCR_DUPLEX_FULL 0x0100
|
#define PSR_LINKUP 0x0004
|
|
#define PAR_ADV100FD 0x0100
|
#define PAR_ADV100HD 0x0080
|
#define PAR_ADV10FD 0x0040
|
#define PAR_ADV10HD 0x0020
|
#define PAR_ASYMPAUSE 0x0C00
|
#define PAR_802_3 0x0001
|
|
#define PAR_ADV1000XFD 0x0020
|
#define PAR_ADV1000XHD 0x0040
|
#define PAR_ASYMPAUSE_FIBER 0x0180
|
|
#define PGC_ADV1000FD 0x0200
|
#define PGC_ADV1000HD 0x0100
|
#define SEEQ_LINKFAIL 0x4000
|
#define SEEQ_SPEED 0x0080
|
#define SEEQ_DUPLEX 0x0040
|
#define TDK_DUPLEX 0x0800
|
#define TDK_SPEED 0x0400
|
#define MRV_REG16_XOVERON 0x0068
|
#define MRV_REG16_XOVEROFF 0x0008
|
#define MRV_SPEED_1000 0x8000
|
#define MRV_SPEED_100 0x4000
|
#define MRV_SPEED_10 0x0000
|
#define MRV_FULLDUPLEX 0x2000
|
#define MRV_LINKUP 0x0400
|
|
#define GIG_LINKUP 0x0001
|
#define GIG_FULLDUPLEX 0x0002
|
#define GIG_SPEED_MASK 0x000C
|
#define GIG_SPEED_1000 0x0008
|
#define GIG_SPEED_100 0x0004
|
#define GIG_SPEED_10 0x0000
|
|
#define MCR_RESET 0x80000000
|
#define MCR_CRCEN 0x40000000
|
#define MCR_FULLD 0x10000000
|
#define MCR_PAD 0x02000000
|
#define MCR_RETRYLATE 0x01000000
|
#define MCR_BOL_SHIFT 21
|
#define MCR_IPG1_SHIFT 14
|
#define MCR_IPG2_SHIFT 7
|
#define MCR_IPG3_SHIFT 0
|
#define GMCR_RESET 0x80000000
|
#define GMCR_GBIT 0x20000000
|
#define GMCR_FULLD 0x10000000
|
#define GMCR_GAPBB_SHIFT 14
|
#define GMCR_GAPR1_SHIFT 7
|
#define GMCR_GAPR2_SHIFT 0
|
#define GMCR_GAPBB_1000 0x60
|
#define GMCR_GAPR1_1000 0x2C
|
#define GMCR_GAPR2_1000 0x40
|
#define GMCR_GAPBB_100 0x70
|
#define GMCR_GAPR1_100 0x2C
|
#define GMCR_GAPR2_100 0x40
|
#define XCR_RESET 0x80000000
|
#define XCR_XMTEN 0x40000000
|
#define XCR_PAUSEEN 0x20000000
|
#define XCR_LOADRNG 0x10000000
|
#define RCR_RESET 0x80000000
|
#define RCR_RCVEN 0x40000000
|
#define RCR_RCVALL 0x20000000
|
#define RCR_RCVBAD 0x10000000
|
#define RCR_CTLEN 0x08000000
|
#define RCR_ADDRAEN 0x02000000
|
#define GXCR_RESET 0x80000000
|
#define GXCR_XMTEN 0x40000000
|
#define GXCR_PAUSEEN 0x20000000
|
#define GRCR_RESET 0x80000000
|
#define GRCR_RCVEN 0x40000000
|
#define GRCR_RCVALL 0x20000000
|
#define GRCR_RCVBAD 0x10000000
|
#define GRCR_CTLEN 0x08000000
|
#define GRCR_ADDRAEN 0x02000000
|
#define GRCR_HASHSIZE_SHIFT 17
|
#define GRCR_HASHSIZE 14
|
|
#define SLIC_EEPROM_ID 0xA5A5
|
#define SLIC_SRAM_SIZE2GB (64 * 1024)
|
#define SLIC_SRAM_SIZE1GB (32 * 1024)
|
#define SLIC_HOSTID_DEFAULT 0xFFFF /* uninitialized hostid */
|
#define SLIC_NBR_MACS 4
|
|
struct slic_rcvbuf {
|
u8 pad1[6];
|
u16 pad2;
|
u32 pad3;
|
u32 pad4;
|
u32 buffer;
|
u32 length;
|
u32 status;
|
u32 pad5;
|
u16 pad6;
|
u8 data[SLIC_RCVBUF_DATASIZE];
|
};
|
|
struct slic_hddr_wds {
|
union {
|
struct {
|
u32 frame_status;
|
u32 frame_status_b;
|
u32 time_stamp;
|
u32 checksum;
|
} hdrs_14port;
|
struct {
|
u32 frame_status;
|
u16 ByteCnt;
|
u16 TpChksum;
|
u16 CtxHash;
|
u16 MacHash;
|
u32 BufLnk;
|
} hdrs_gbit;
|
} u0;
|
};
|
|
#define frame_status14 u0.hdrs_14port.frame_status
|
#define frame_status_b14 u0.hdrs_14port.frame_status_b
|
#define frame_statusGB u0.hdrs_gbit.frame_status
|
|
struct slic_host64sg {
|
u32 paddrl;
|
u32 paddrh;
|
u32 length;
|
};
|
|
struct slic_host64_cmd {
|
u32 hosthandle;
|
u32 RSVD;
|
u8 command;
|
u8 flags;
|
union {
|
u16 rsv1;
|
u16 rsv2;
|
} u0;
|
union {
|
struct {
|
u32 totlen;
|
struct slic_host64sg bufs[SLIC_MAX64_BCNT];
|
} slic_buffers;
|
} u;
|
};
|
|
struct slic_rspbuf {
|
u32 hosthandle;
|
u32 pad0;
|
u32 pad1;
|
u32 status;
|
u32 pad2[4];
|
};
|
|
/* Reset Register */
|
#define SLIC_REG_RESET 0x0000
|
/* Interrupt Control Register */
|
#define SLIC_REG_ICR 0x0008
|
/* Interrupt status pointer */
|
#define SLIC_REG_ISP 0x0010
|
/* Interrupt status */
|
#define SLIC_REG_ISR 0x0018
|
/*
|
* Header buffer address reg
|
* 31-8 - phy addr of set of contiguous hdr buffers
|
* 7-0 - number of buffers passed
|
* Buffers are 256 bytes long on 256-byte boundaries.
|
*/
|
#define SLIC_REG_HBAR 0x0020
|
/*
|
* Data buffer handle & address reg
|
* 4 sets of registers; Buffers are 2K bytes long 2 per 4K page.
|
*/
|
#define SLIC_REG_DBAR 0x0028
|
/*
|
* Xmt Cmd buf addr regs.
|
* 1 per XMT interface
|
* 31-5 - phy addr of host command buffer
|
* 4-0 - length of cmd in multiples of 32 bytes
|
* Buffers are 32 bytes up to 512 bytes long
|
*/
|
#define SLIC_REG_CBAR 0x0030
|
/* Write control store */
|
#define SLIC_REG_WCS 0x0034
|
/*
|
* Response buffer address reg.
|
* 31-8 - phy addr of set of contiguous response buffers
|
* 7-0 - number of buffers passed
|
* Buffers are 32 bytes long on 32-byte boundaries.
|
*/
|
#define SLIC_REG_RBAR 0x0038
|
/* Read statistics (UPR) */
|
#define SLIC_REG_RSTAT 0x0040
|
/* Read link status */
|
#define SLIC_REG_LSTAT 0x0048
|
/* Write Mac Config */
|
#define SLIC_REG_WMCFG 0x0050
|
/* Write phy register */
|
#define SLIC_REG_WPHY 0x0058
|
/* Rcv Cmd buf addr reg */
|
#define SLIC_REG_RCBAR 0x0060
|
/* Read SLIC Config*/
|
#define SLIC_REG_RCONFIG 0x0068
|
/* Interrupt aggregation time */
|
#define SLIC_REG_INTAGG 0x0070
|
/* Write XMIT config reg */
|
#define SLIC_REG_WXCFG 0x0078
|
/* Write RCV config reg */
|
#define SLIC_REG_WRCFG 0x0080
|
/* Write rcv addr a low */
|
#define SLIC_REG_WRADDRAL 0x0088
|
/* Write rcv addr a high */
|
#define SLIC_REG_WRADDRAH 0x0090
|
/* Write rcv addr b low */
|
#define SLIC_REG_WRADDRBL 0x0098
|
/* Write rcv addr b high */
|
#define SLIC_REG_WRADDRBH 0x00a0
|
/* Low bits of mcast mask */
|
#define SLIC_REG_MCASTLOW 0x00a8
|
/* High bits of mcast mask */
|
#define SLIC_REG_MCASTHIGH 0x00b0
|
/* Ping the card */
|
#define SLIC_REG_PING 0x00b8
|
/* Dump command */
|
#define SLIC_REG_DUMP_CMD 0x00c0
|
/* Dump data pointer */
|
#define SLIC_REG_DUMP_DATA 0x00c8
|
/* Read card's pci_status register */
|
#define SLIC_REG_PCISTATUS 0x00d0
|
/* Write hostid field */
|
#define SLIC_REG_WRHOSTID 0x00d8
|
/* Put card in a low power state */
|
#define SLIC_REG_LOW_POWER 0x00e0
|
/* Force slic into quiescent state before soft reset */
|
#define SLIC_REG_QUIESCE 0x00e8
|
/* Reset interface queues */
|
#define SLIC_REG_RESET_IFACE 0x00f0
|
/*
|
* Register is only written when it has changed.
|
* Bits 63-32 for host i/f addrs.
|
*/
|
#define SLIC_REG_ADDR_UPPER 0x00f8
|
/* 64 bit Header buffer address reg */
|
#define SLIC_REG_HBAR64 0x0100
|
/* 64 bit Data buffer handle & address reg */
|
#define SLIC_REG_DBAR64 0x0108
|
/* 64 bit Xmt Cmd buf addr regs. */
|
#define SLIC_REG_CBAR64 0x0110
|
/* 64 bit Response buffer address reg.*/
|
#define SLIC_REG_RBAR64 0x0118
|
/* 64 bit Rcv Cmd buf addr reg*/
|
#define SLIC_REG_RCBAR64 0x0120
|
/* Read statistics (64 bit UPR) */
|
#define SLIC_REG_RSTAT64 0x0128
|
/* Download Gigabit RCV sequencer ucode */
|
#define SLIC_REG_RCV_WCS 0x0130
|
/* Write VlanId field */
|
#define SLIC_REG_WRVLANID 0x0138
|
/* Read Transformer info */
|
#define SLIC_REG_READ_XF_INFO 0x0140
|
/* Write Transformer info */
|
#define SLIC_REG_WRITE_XF_INFO 0x0148
|
/* Write card ticks per second */
|
#define SLIC_REG_TICKS_PER_SEC 0x0170
|
|
#define SLIC_REG_HOSTID 0x1554
|
|
enum UPR_REQUEST {
|
SLIC_UPR_STATS,
|
SLIC_UPR_RLSR,
|
SLIC_UPR_WCFG,
|
SLIC_UPR_RCONFIG,
|
SLIC_UPR_RPHY,
|
SLIC_UPR_ENLB,
|
SLIC_UPR_ENCT,
|
SLIC_UPR_PDWN,
|
SLIC_UPR_PING,
|
SLIC_UPR_DUMP,
|
};
|
|
struct inicpm_wakepattern {
|
u32 patternlength;
|
u8 pattern[SLIC_PM_PATTERNSIZE];
|
u8 mask[SLIC_PM_PATTERNSIZE];
|
};
|
|
struct inicpm_state {
|
u32 powercaps;
|
u32 powerstate;
|
u32 wake_linkstatus;
|
u32 wake_magicpacket;
|
u32 wake_framepattern;
|
struct inicpm_wakepattern wakepattern[SLIC_PM_MAXPATTERNS];
|
};
|
|
struct slicpm_packet_pattern {
|
u32 priority;
|
u32 reserved;
|
u32 masksize;
|
u32 patternoffset;
|
u32 patternsize;
|
u32 patternflags;
|
};
|
|
enum slicpm_power_state {
|
slicpm_state_unspecified = 0,
|
slicpm_state_d0,
|
slicpm_state_d1,
|
slicpm_state_d2,
|
slicpm_state_d3,
|
slicpm_state_maximum
|
};
|
|
struct slicpm_wakeup_capabilities {
|
enum slicpm_power_state min_magic_packet_wakeup;
|
enum slicpm_power_state min_pattern_wakeup;
|
enum slicpm_power_state min_link_change_wakeup;
|
};
|
|
struct slic_pnp_capabilities {
|
u32 flags;
|
struct slicpm_wakeup_capabilities wakeup_capabilities;
|
};
|
|
struct slic_config_mac {
|
u8 macaddrA[6];
|
};
|
|
#define ATK_FRU_FORMAT 0x00
|
#define VENDOR1_FRU_FORMAT 0x01
|
#define VENDOR2_FRU_FORMAT 0x02
|
#define VENDOR3_FRU_FORMAT 0x03
|
#define VENDOR4_FRU_FORMAT 0x04
|
#define NO_FRU_FORMAT 0xFF
|
|
struct atk_fru {
|
u8 assembly[6];
|
u8 revision[2];
|
u8 serial[14];
|
u8 pad[3];
|
};
|
|
struct vendor1_fru {
|
u8 commodity;
|
u8 assembly[4];
|
u8 revision[2];
|
u8 supplier[2];
|
u8 date[2];
|
u8 sequence[3];
|
u8 pad[13];
|
};
|
|
struct vendor2_fru {
|
u8 part[8];
|
u8 supplier[5];
|
u8 date[3];
|
u8 sequence[4];
|
u8 pad[7];
|
};
|
|
struct vendor3_fru {
|
u8 assembly[6];
|
u8 revision[2];
|
u8 serial[14];
|
u8 pad[3];
|
};
|
|
struct vendor4_fru {
|
u8 number[8];
|
u8 part[8];
|
u8 version[8];
|
u8 pad[3];
|
};
|
|
union oemfru {
|
struct vendor1_fru vendor1_fru;
|
struct vendor2_fru vendor2_fru;
|
struct vendor3_fru vendor3_fru;
|
struct vendor4_fru vendor4_fru;
|
};
|
|
/*
|
* SLIC EEPROM structure for Mojave
|
*/
|
struct slic_eeprom {
|
u16 Id; /* 00 EEPROM/FLASH Magic code 'A5A5'*/
|
u16 EecodeSize; /* 01 Size of EEPROM Codes (bytes * 4)*/
|
u16 FlashSize; /* 02 Flash size */
|
u16 EepromSize; /* 03 EEPROM Size */
|
u16 VendorId; /* 04 Vendor ID */
|
u16 DeviceId; /* 05 Device ID */
|
u8 RevisionId; /* 06 Revision ID */
|
u8 ClassCode[3]; /* 07 Class Code */
|
u8 DbgIntPin; /* 08 Debug Interrupt pin */
|
u8 NetIntPin0; /* Network Interrupt Pin */
|
u8 MinGrant; /* 09 Minimum grant */
|
u8 MaxLat; /* Maximum Latency */
|
u16 PciStatus; /* 10 PCI Status */
|
u16 SubSysVId; /* 11 Subsystem Vendor Id */
|
u16 SubSysId; /* 12 Subsystem ID */
|
u16 DbgDevId; /* 13 Debug Device Id */
|
u16 DramRomFn; /* 14 Dram/Rom function */
|
u16 DSize2Pci; /* 15 DRAM size to PCI (bytes * 64K) */
|
u16 RSize2Pci; /* 16 ROM extension size to PCI (bytes * 4k) */
|
u8 NetIntPin1; /* 17 Network Interface Pin 1
|
* (simba/leone only)
|
*/
|
u8 NetIntPin2; /* Network Interface Pin 2 (simba/leone only)*/
|
union {
|
u8 NetIntPin3; /* 18 Network Interface Pin 3 (simba only) */
|
u8 FreeTime; /* FreeTime setting (leone/mojave only) */
|
} u1;
|
u8 TBIctl; /* 10-bit interface control (Mojave only) */
|
u16 DramSize; /* 19 DRAM size (bytes * 64k) */
|
union {
|
struct {
|
/* Mac Interface Specific portions */
|
struct slic_config_mac MacInfo[SLIC_NBR_MACS];
|
} mac; /* MAC access for all boards */
|
struct {
|
/* use above struct for MAC access */
|
struct slic_config_mac pad[SLIC_NBR_MACS - 1];
|
u16 DeviceId2; /* Device ID for 2nd PCI function */
|
u8 IntPin2; /* Interrupt pin for 2nd PCI function */
|
u8 ClassCode2[3]; /* Class Code for 2nd PCI function */
|
} mojave; /* 2nd function access for gigabit board */
|
} u2;
|
u16 CfgByte6; /* Config Byte 6 */
|
u16 PMECapab; /* Power Mgment capabilities */
|
u16 NwClkCtrls; /* NetworkClockControls */
|
u8 FruFormat; /* Alacritech FRU format type */
|
struct atk_fru AtkFru; /* Alacritech FRU information */
|
u8 OemFruFormat; /* optional OEM FRU format type */
|
union oemfru OemFru; /* optional OEM FRU information */
|
u8 Pad[4]; /* Pad to 128 bytes - includes 2 cksum bytes
|
* (if OEM FRU info exists) and two unusable
|
* bytes at the end
|
*/
|
};
|
|
/* SLIC EEPROM structure for Oasis */
|
struct oslic_eeprom {
|
u16 Id; /* 00 EEPROM/FLASH Magic code 'A5A5' */
|
u16 EecodeSize; /* 01 Size of EEPROM Codes (bytes * 4)*/
|
u16 FlashConfig0; /* 02 Flash Config for SPI device 0 */
|
u16 FlashConfig1; /* 03 Flash Config for SPI device 1 */
|
u16 VendorId; /* 04 Vendor ID */
|
u16 DeviceId; /* 05 Device ID (function 0) */
|
u8 RevisionId; /* 06 Revision ID */
|
u8 ClassCode[3]; /* 07 Class Code for PCI function 0 */
|
u8 IntPin1; /* 08 Interrupt pin for PCI function 1*/
|
u8 ClassCode2[3]; /* 09 Class Code for PCI function 1 */
|
u8 IntPin2; /* 10 Interrupt pin for PCI function 2*/
|
u8 IntPin0; /* Interrupt pin for PCI function 0*/
|
u8 MinGrant; /* 11 Minimum grant */
|
u8 MaxLat; /* Maximum Latency */
|
u16 SubSysVId; /* 12 Subsystem Vendor Id */
|
u16 SubSysId; /* 13 Subsystem ID */
|
u16 FlashSize; /* 14 Flash size (bytes / 4K) */
|
u16 DSize2Pci; /* 15 DRAM size to PCI (bytes / 64K) */
|
u16 RSize2Pci; /* 16 Flash (ROM extension) size to PCI
|
* (bytes / 4K)
|
*/
|
u16 DeviceId1; /* 17 Device Id (function 1) */
|
u16 DeviceId2; /* 18 Device Id (function 2) */
|
u16 CfgByte6; /* 19 Device Status Config Bytes 6-7 */
|
u16 PMECapab; /* 20 Power Mgment capabilities */
|
u8 MSICapab; /* 21 MSI capabilities */
|
u8 ClockDivider; /* Clock divider */
|
u16 PciStatusLow; /* 22 PCI Status bits 15:0 */
|
u16 PciStatusHigh; /* 23 PCI Status bits 31:16 */
|
u16 DramConfigLow; /* 24 DRAM Configuration bits 15:0 */
|
u16 DramConfigHigh; /* 25 DRAM Configuration bits 31:16 */
|
u16 DramSize; /* 26 DRAM size (bytes / 64K) */
|
u16 GpioTbiCtl; /* 27 GPIO/TBI controls for functions 1/0 */
|
u16 EepromSize; /* 28 EEPROM Size */
|
struct slic_config_mac MacInfo[2]; /* 29 MAC addresses (2 ports) */
|
u8 FruFormat; /* 35 Alacritech FRU format type */
|
struct atk_fru AtkFru; /* Alacritech FRU information */
|
u8 OemFruFormat; /* optional OEM FRU format type */
|
union oemfru OemFru; /* optional OEM FRU information */
|
u8 Pad[4]; /* Pad to 128 bytes - includes 2 checksum bytes
|
* (if OEM FRU info exists) and two unusable
|
* bytes at the end
|
*/
|
};
|
|
#define MAX_EECODE_SIZE sizeof(struct slic_eeprom)
|
#define MIN_EECODE_SIZE 0x62 /* code size without optional OEM FRU stuff */
|
|
/*
|
* SLIC CONFIG structure
|
*
|
* This structure lives in the CARD structure and is valid for all board types.
|
* It is filled in from the appropriate EEPROM structure by
|
* SlicGetConfigData()
|
*/
|
struct slic_config {
|
bool EepromValid; /* Valid EEPROM flag (checksum good?) */
|
u16 DramSize; /* DRAM size (bytes / 64K) */
|
struct slic_config_mac MacInfo[SLIC_NBR_MACS]; /* MAC addresses */
|
u8 FruFormat; /* Alacritech FRU format type */
|
struct atk_fru AtkFru; /* Alacritech FRU information */
|
u8 OemFruFormat; /* optional OEM FRU format type */
|
union {
|
struct vendor1_fru vendor1_fru;
|
struct vendor2_fru vendor2_fru;
|
struct vendor3_fru vendor3_fru;
|
struct vendor4_fru vendor4_fru;
|
} OemFru;
|
};
|
|
#pragma pack()
|
|
#endif
|
