/* SPDX-License-Identifier: GPL-2.0+ */
|
/*
|
* iPAQ h2200 board configuration
|
*
|
* Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
|
*/
|
|
#ifndef __CONFIG_H
|
#define __CONFIG_H
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_H2200
|
|
#define CONFIG_CPU_PXA25X 1
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
|
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
#define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_1_SIZE
|
|
#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800
|
|
#define CONFIG_ENV_SIZE 0x00040000
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
|
|
#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */
|
|
/*
|
* iPAQ 1st stage bootloader loads 2nd stage bootloader
|
* at address 0xa0040000 but bootloader requires header
|
* which is 0x1000 long.
|
*
|
* --- Header begin ---
|
* .word 0xea0003fe ; b 0x1000
|
*
|
* .org 0x40
|
* .ascii "ECEC"
|
*
|
* .org 0x1000
|
* --- Header end ---
|
*/
|
|
/*
|
* Static chips
|
*/
|
|
#define CONFIG_SYS_MSC0_VAL 0x246c7ffc
|
#define CONFIG_SYS_MSC1_VAL 0x7ff07ff0
|
#define CONFIG_SYS_MSC2_VAL 0x7ff07ff0
|
|
/*
|
* PCMCIA and CF Interfaces
|
*/
|
|
#define CONFIG_SYS_MECR_VAL 0x00000000
|
#define CONFIG_SYS_MCMEM0_VAL 0x00000000
|
#define CONFIG_SYS_MCMEM1_VAL 0x00000000
|
#define CONFIG_SYS_MCATT0_VAL 0x00000000
|
#define CONFIG_SYS_MCATT1_VAL 0x00000000
|
#define CONFIG_SYS_MCIO0_VAL 0x00000000
|
#define CONFIG_SYS_MCIO1_VAL 0x00000000
|
|
#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
|
#define CONFIG_SYS_SXCNFG_VAL 0x00040004
|
|
#define CONFIG_SYS_MDREFR_VAL 0x0099E018
|
#define CONFIG_SYS_MDCNFG_VAL 0x01C801CB
|
#define CONFIG_SYS_MDMRS_VAL 0x00220022
|
|
#define CONFIG_SYS_PSSR_VAL 0x00000000
|
#define CONFIG_SYS_CKEN 0x00004840
|
#define CONFIG_SYS_CCCR 0x00000161
|
|
/*
|
* GPIOs
|
*/
|
|
#define CONFIG_SYS_GPSR0_VAL 0x01000000
|
#define CONFIG_SYS_GPSR1_VAL 0x00000000
|
#define CONFIG_SYS_GPSR2_VAL 0x00010000
|
|
#define CONFIG_SYS_GPCR0_VAL 0x00000000
|
#define CONFIG_SYS_GPCR1_VAL 0x00000000
|
#define CONFIG_SYS_GPCR2_VAL 0x00000000
|
|
#define CONFIG_SYS_GPDR0_VAL 0xF7E38C00
|
#define CONFIG_SYS_GPDR1_VAL 0xBCFFBF83
|
#define CONFIG_SYS_GPDR2_VAL 0x000157FF
|
|
#define CONFIG_SYS_GAFR0_L_VAL 0x80401000
|
#define CONFIG_SYS_GAFR0_U_VAL 0x00000112
|
#define CONFIG_SYS_GAFR1_L_VAL 0x600A9550
|
#define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA
|
#define CONFIG_SYS_GAFR2_L_VAL 0x20000000
|
#define CONFIG_SYS_GAFR2_U_VAL 0x00000000
|
|
/*
|
* Serial port
|
*/
|
#define CONFIG_FFUART
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 }
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
#define CONFIG_CMDLINE_TAG
|
#define CONFIG_INITRD_TAG
|
|
/* Monitor Command Prompt */
|
|
#define CONFIG_USB_DEV_PULLUP_GPIO 33
|
/* USB VBUS GPIO 3 */
|
|
#define CONFIG_BOOTCOMMAND \
|
"setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
|
"if bootp ; then setenv downloaded 1 ; fi ; done ; " \
|
"source :script ; " \
|
"bootm ; "
|
|
#define CONFIG_USB_GADGET_PXA2XX
|
#define CONFIG_USB_ETH_SUBSET
|
|
#define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01"
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
"stdin=serial\0" \
|
"stdout=serial\0" \
|
"stderr=serial\0"
|
|
#endif /* __CONFIG_H */
|
