|
/*
|
* (C) Copyright 2018
|
* wangwei <wangwei@allwinnertech.com>
|
* SPDX-License-Identifier: GPL-2.0+
|
*/
|
|
|
#ifndef __spare_head_h__
|
#define __spare_head_h__
|
|
/* work mode */
|
#define WORK_MODE_PRODUCT (1<<4)
|
#define WORK_MODE_UPDATE (1<<5)
|
|
#define WORK_MODE_BOOT 0x00 /*normal boot mode */
|
#define WORK_MODE_USB_PRODUCT 0x10 /*usb product mode */
|
#define WORK_MODE_CARD_PRODUCT 0x11 /*card burn mode */
|
#define WORK_MODE_USB_DEBUG 0x12 /*some test mode by usb efex protocol */
|
#define WORK_MODE_SPRITE_RECOVERY 0x13 /*update firmware from internal backup part */
|
#define WORK_MODE_CARD_UPDATE 0x14 /*update firmware from sdcard */
|
#define WORK_MODE_USB_UPDATE 0x20 /*usb update mode */
|
#define WORK_MODE_UDISK_UPDATE 0x15
|
#define WORK_MODE_OUTER_UPDATE 0x21
|
|
#define WORK_MODE_USB_TOOL_PRODUCT 0x04
|
#define WORK_MODE_USB_TOOL_UPDATE 0x08
|
#define WORK_MODE_ERASE_KEY 0x20
|
|
#define UBOOT_MAGIC "uboot"
|
#define STAMP_VALUE 0x5F0A6C39
|
#define ALIGN_SIZE 16 * 1024
|
#define MAGIC_SIZE 8
|
#define STORAGE_BUFFER_SIZE (256)
|
|
#define PARAMETER_MAGIC "para"
|
#define BOOT_PARAMETER_SIZE (4094*2)
|
|
#define SUNXI_UPDATE_NEXT_ACTION_NORMAL (1)
|
#define SUNXI_UPDATE_NEXT_ACTION_REBOOT (2)
|
#define SUNXI_UPDATE_NEXT_ACTION_SHUTDOWN (3)
|
#define SUNXI_UPDATE_NEXT_ACTION_REUPDATE (4)
|
#define SUNXI_UPDATE_NEXT_ACTION_BOOT (5)
|
#define SUNXI_UPDATA_NEXT_ACTION_SPRITE_TEST (6)
|
|
#define SUNXI_DEBUG_MODE_FLAG (0x59)
|
#define SUNXI_EFEX_CMD_FLAG (0x5A)
|
#define SUNXI_BOOT_RESIGNATURE_FLAG (0x5B)
|
#define SUNXI_BOOT_RECOVERY_FLAG (0x5C)
|
#define SUNXI_SYS_RECOVERY_FLAG (0x5D)
|
#define SUNXI_USB_RECOVERY_FLAG (0x5E)
|
#define SUNXI_FASTBOOT_FLAG (0x5F)
|
#define SUNXI_UBOOT_FLAG (0x60)
|
#define SUNXI_CHARGING_FLAG (0x61)
|
|
#define SUNXI_VBUS_UNKNOWN (0)
|
#define SUNXI_VBUS_EXIST (1)
|
#define SUNXI_VBUS_NOT_EXIST (2)
|
|
#define BOOT0_SDMMC_START_ADDR (16)
|
#define BOOT0_SDMMC_BACKUP_START_ADDR (256)
|
|
#define BOOT0_EMMC3_START_ADDR (384)
|
#define BOOT0_EMMC3_BACKUP_START_ADDR (512)
|
|
|
#define UBOOT_START_SECTOR_IN_SDMMC (32800)
|
#define UBOOT_BACKUP_START_SECTOR_IN_SDMMC (24576)
|
|
|
#define SUNXI_NORMAL_MODE 0
|
#define SUNXI_SECURE_MODE_WITH_SECUREOS 1
|
#define SUNXI_SECURE_MODE_NO_SECUREOS 2
|
|
#define SUNXI_RUN_CRASHDUMP_RESET_FLAG (0x5AA55AA5)
|
#define SUNXI_RUN_CRASHDUMP_RESET_READY (0x5AA55AA6)
|
#define SUNXI_RUN_CRASHDUMP_REFRESH_READY (0x5AA55AA7)
|
|
#define SUNXI_DTB_OFFSET (2<<20)
|
#define SUNXI_DTBO_OFFSET (1<<20)
|
|
typedef enum _SUNXI_BOOT_FILE_MODE
|
{
|
SUNXI_BOOT_FILE_NORMAL =0,
|
SUNXI_BOOT_FILE_TOC = 1,
|
SUNXI_BOOT_FILE_RES0 = 2,
|
SUNXI_BOOT_FILE_RES1 = 3,
|
SUNXI_BOOT_FILE_PKG = 4
|
}SUNXI_BOOT_FILE_MODE;
|
|
|
#define BOOT_FROM_SD0 0
|
#define BOOT_FROM_NFC 1
|
#define BOOT_FROM_SD2 2
|
#define BOOT_FROM_SPI_NOR 3
|
#define BOOT_FROM_SPI_NAND 4
|
|
|
#define SUNXI_SECURE_MODE_USE_SEC_MONITOR 1
|
#define TOC_ITEM_ENTRY_STATUS_ENCRYP_NOT_USED 0x00
|
#define TOC_ITEM_ENTRY_STATUS_ENCRYP_USED 0x01
|
|
#define TOC_ITEM_ENTRY_TYPE_NULL 0x00
|
#define TOC_ITEM_ENTRY_TYPE_KEY_CERTIF 0x01
|
#define TOC_ITEM_ENTRY_TYPE_BIN_CERTIF 0x02
|
#define TOC_ITEM_ENTRY_TYPE_BIN 0x03
|
#define TOC_ITEM_ENTRY_TYPE_LOGO 0x04
|
|
typedef struct _normal_gpio_cfg
|
{
|
char port; /* port : PA/PB/PC ... */
|
char port_num; /* internal port num: PA00/PA01 ... */
|
char mul_sel; /* function num: input/output/io-disalbe ...*/
|
char pull; /* pull-up/pull-down/no-pull */
|
char drv_level; /* driver level: level0-3*/
|
char data; /* pin state when the port is configured as input or output*/
|
char reserved[2];
|
}
|
normal_gpio_cfg;
|
|
typedef struct _special_gpio_cfg
|
{
|
unsigned char port; /* port : PA/PB/PC ... */
|
unsigned char port_num; /* intern port num: PA00/PA01 .. */
|
char mul_sel; /* function num: input/output/io-disalbe ...*/
|
char data; /* pin state when the port is configured as input or output*/
|
}special_gpio_cfg;
|
|
typedef struct sdcard_spare_info_t
|
{
|
int card_no[4]; /*controller num*/
|
int speed_mode[4]; /*speed mode: 0--low speed, other--high speed */
|
int line_sel[4]; /*line mode: 1/4/8*/
|
int line_count[4]; /*line count*/
|
}
|
sdcard_spare_info;
|
|
typedef enum
|
{
|
STORAGE_NAND =0,
|
STORAGE_SD,
|
STORAGE_EMMC,
|
STORAGE_NOR,
|
STORAGE_EMMC3,
|
STORAGE_SPI_NAND,
|
STORAGE_SD1,
|
}SUNXI_BOOT_STORAGE;
|
|
#endif
|
