PINE64 ROCKPro64
|
================
|
https://www.pine64.org/rockpro64/
|
|
Build:
|
======
|
$ make rockpro64_defconfig
|
$ make
|
|
Files created in output directory
|
=================================
|
|
output/images
|
|
├── bl31.elf
|
├── boot.vfat
|
├── extlinux
|
├── idbloader.img
|
├── Image
|
├── rk3399-rockpro64.dtb
|
├── rootfs.ext2
|
├── rootfs.ext4 -> rootfs.ext2
|
├── rootfs.tar
|
├── sdcard.img
|
├── u-boot.bin
|
└── u-boot.itb
|
|
Creating bootable SD card:
|
==========================
|
|
Simply invoke (as root)
|
|
sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
|
|
Where X is your SD card device.
|
|
Booting:
|
========
|
RockPro64 has a 40-pin PI-2 GPIO Bus.
|
|
Connect a jumper between pin 23 and pin 25 for SD card boot.
|
|
Serial console:
|
---------------
|
The pin layout for serial console on PI-2 GPIO Bus is as follows:
|
|
pin 6: gnd
|
pin 8: tx
|
pin 10: rx
|
|
Initially connect pin 6 and pin 8(transmit). Apply power to RockPro64, once the
|
power is on then connect pin 10(receive).
|
|
Baudrate for this board is 1500000.
|
|
Login:
|
------
|
Enter 'root' as login user, and the prompt is ready.
|
|
https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/rockpro64.html
|
