/** @file
|
PCIE DXE policy definitions
|
|
Copyright (c) 2019 Intel Corporation. All rights reserved. <BR>
|
|
SPDX-License-Identifier: BSD-2-Clause-Patent
|
**/
|
|
#ifndef _PCIE_DXE_CONFIG_H_
|
#define _PCIE_DXE_CONFIG_H_
|
|
#pragma pack(push, 1)
|
|
#define PCIE_DXE_CONFIG_REVISION 1
|
|
///
|
/// Device List for special ASPM override
|
///
|
typedef struct {
|
UINT16 VendorId; ///< Offset 0 PCI Configuration space offset 0
|
UINT16 DeviceId; ///< Offset 2 PCI Configuration space offset 2
|
UINT8 RevId; ///< Offset 4 PCI Configuration space offset 8; 0xFF means all steppings
|
UINT8 RootApmcMask; ///< Offset 5 Root ASPM override bit mask <b>0=No override</b>
|
UINT8 EndpointApmcMask; ///< Offset 6 Endpoint ASPM override bit mask <b>0=No override</b>
|
UINT8 Rsvd; ///< Offset 7 Reserved
|
} PCIE_ASPM_OVERRIDE_LIST;
|
|
typedef struct {
|
UINT16 VendorId; ///< Offset 0 PCI Config space offset 0
|
UINT16 DeviceId; ///< Offset 2 PCI Config space offset 2
|
/**
|
Offset 4:
|
SnoopLatency bit definition
|
Note: All Reserved bits must be set to 0
|
|
BIT[15] - When set to 1b, indicates that the values in bits 9:0 are valid
|
When clear values in bits 9:0 will be ignored
|
BIT[14] - Should be set to 0b
|
BIT[13] - Reserved
|
BITS[12:10] - Value in bits 9:0 will be multiplied with the scale in these bits
|
000b - 1 ns
|
001b - 32 ns
|
010b - 1024 ns
|
011b - 32,768 ns
|
100b - 1,048,576 ns
|
101b - 33,554,432 ns
|
110b - Reserved
|
111b - Reserved
|
BITS[9:0] - Snoop Latency Value. The value in these bits will be multiplied with
|
the scale in bits 12:10
|
**/
|
UINT16 SnoopLatency;
|
/**
|
Offset 6:
|
NonSnoopLatency bit definition
|
Note: All Reserved bits must be set to 0
|
|
BIT[15] - When set to 1b, indicates that the values in bits 9:0 are valid
|
When clear values in bits 9:0 will be ignored
|
BIT[14] - Should be set to 0b
|
BIT[13] - Reserved
|
BITS[12:10] - Value in bits 9:0 will be multiplied with the scale in these bits
|
000b - 1 ns
|
001b - 32 ns
|
010b - 1024 ns
|
011b - 32,768 ns
|
100b - 1,048,576 ns
|
101b - 33,554,432 ns
|
110b - Reserved
|
111b - Reserved
|
BITS[9:0] - Non Snoop Latency Value. The value in these bits will be multiplied with
|
the scale in bits 12:10
|
**/
|
UINT16 NonSnoopLatency;
|
UINT8 RevId; ///< Offset 8 PCI Config space offset 8; 0xFF means all steppings
|
UINT8 Rsvd0[3]; ///< Offset 9
|
} PCIE_LTR_DEV_INFO;
|
|
///
|
/// PCIE Power Optimizer config
|
///
|
typedef struct {
|
UINT16 LtrMaxSnoopLatency; ///< Offset 0 LTR Maximum Snoop Latency: <b>0x0846=70us</b>
|
UINT16 LtrMaxNoSnoopLatency; ///< Offset 2 LTR Maximum Non-Snoop Latency: <b>0x0846=70us</b>
|
UINT8 ObffEnable; ///< Offset 4 LTR enable/disable: 0=Disable, <b>1=Enable</b>
|
UINT8 LtrEnable; ///< Offset 5 LTR enable/disable: 0=Disable, <b>1=Enable</b>
|
UINT8 Rsvd0[2]; ///< Offset 6 Reserved
|
} SA_PCIE_PWR_OPT;
|
|
|
/**
|
The PCI Express Configuration info includes PCI Resources Range Base and Limits and the control
|
for PEG ASPM.
|
The data elements should be initialized by a Platform Module.\n
|
@note <b>Optional.</b> These policies will be ignored if there is no PEG port present on board.
|
<b>Revision 1</b>:
|
- Initial version.
|
**/
|
typedef struct {
|
CONFIG_BLOCK_HEADER Header; ///< Offset 0-27 Config Block Header
|
/**
|
Offset 28: This field is used to describe the ASPM control for PEG Ports\n
|
0=ASPM Disabled, 1=ASPM L0s Enabled, 2=ASPM L1 Enabled, 3=ASPM L0sL1 Enabled, <b>4=ASPM AUTO</b>
|
**/
|
UINT8 PegAspm[SA_PEG_MAX_FUN];
|
/**
|
Offset 32: This field is used to describe the PEG L0s advanced control
|
0=ASPM L0s disabled, 1=ASPM L0s enabled on RP, 2=ASPM L0s enabled on EP, <b>3=ASPM L0s enabled on both RP and EP</b>
|
**/
|
UINT8 PegAspmL0s[SA_PEG_MAX_FUN];
|
/**
|
Offset 36: PCIe Hot Plug Enable/Disable. It has 2 policies.
|
- <b>Disabled (0x0)</b> : No hotplug.
|
- Enabled (0x1) : Bios assist hotplug.
|
**/
|
UINT8 PegRootPortHPE[SA_PEG_MAX_FUN];
|
/**
|
Offset 40: This field is used as a pointer to the ASPM device override table, default points to an\n
|
existing table mPcieAspmDevsOverride\n
|
Refer to DxeSaPolicyLib.c for the usage.
|
Note: This exclusion list helps avoid potential system hangs.
|
**/
|
PCIE_ASPM_OVERRIDE_LIST *PcieAspmDevsOverride;
|
/**
|
Offset 48: This field is used as a pointer to the LTR device override table, default points to an existing
|
table mPcieLtrDevsOverride.\n
|
Refer to DxeSaPolicyLib.c for the usage.
|
**/
|
PCIE_LTR_DEV_INFO *PcieLtrDevsOverride;
|
SA_PCIE_PWR_OPT PegPwrOpt[SA_PEG_MAX_FUN]; ///< Offset 60: This field is used to describe the PCIe LTR/OBFF relevant settings
|
UINT8 Rsvd1[3]; /// Reserved for future use
|
} PCIE_DXE_CONFIG;
|
#pragma pack(pop)
|
|
#endif // _PCIE_DXE_CONFIG_H_
|
