/******************************************************************************
|
*
|
* Copyright(c) 2007 - 2020 Realtek Corporation.
|
*
|
* This program is free software; you can redistribute it and/or modify it
|
* under the terms of version 2 of the GNU General Public License as
|
* published by the Free Software Foundation.
|
*
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
* more details.
|
*
|
*****************************************************************************/
|
#define _OS_INTFS_C_
|
|
#include <drv_types.h>
|
|
/* module param defaults */
|
int rtw_chip_version = 0x00;
|
int rtw_rfintfs = HWPI;
|
int rtw_lbkmode = 0;/* RTL8712_AIR_TRX; */
|
#ifdef DBG_LA_MODE
|
int rtw_la_mode_en=0;
|
module_param(rtw_la_mode_en, int, 0644);
|
#endif
|
int rtw_network_mode = Ndis802_11IBSS;/* Ndis802_11Infrastructure; */ /* infra, ad-hoc, auto */
|
/* NDIS_802_11_SSID ssid; */
|
int rtw_channel = 36;/* ad-hoc support requirement */
|
int rtw_wireless_mode = WLAN_MD_MAX;
|
int rtw_band_type = BAND_CAP_2G | BAND_CAP_5G | BAND_CAP_6G;
|
module_param(rtw_wireless_mode, int, 0644);
|
module_param(rtw_band_type, int, 0644);
|
#ifdef CONFIG_HW_RTS
|
int rtw_vrtl_carrier_sense = ENABLE_VCS;
|
int rtw_vcs_type = RTS_CTS;
|
int rtw_hw_rts_en = 1;
|
#else
|
int rtw_vrtl_carrier_sense = AUTO_VCS;
|
int rtw_vcs_type = RTS_CTS;
|
int rtw_hw_rts_en = 0;
|
#endif
|
int rtw_rts_thresh = 2347;
|
int rtw_frag_thresh = 2346;
|
int rtw_preamble = PREAMBLE_LONG;/* long, short, auto */
|
int rtw_scan_mode = 1;/* active, passive */
|
/* int smart_ps = 1; */
|
#ifdef CONFIG_POWER_SAVING
|
|
/* LPS configuration */
|
/* RTW_LPS_MODE=0:disable, 1:LPS , 2:LPS with clock gating, 3: power gating */
|
#if (RTW_LPS_MODE > 0)
|
int rtw_power_mgnt = PM_PS_MODE_MAX;
|
|
#ifdef CONFIG_USB_HCI
|
int rtw_lps_level = LPS_NORMAL; /*USB default LPS level*/
|
#else /*SDIO,PCIE*/
|
int rtw_lps_level = (RTW_LPS_MODE - 1);
|
#endif/*CONFIG_USB_HCI*/
|
#else
|
int rtw_power_mgnt = PM_PS_MODE_ACTIVE;
|
int rtw_lps_level = LPS_NORMAL;
|
#endif
|
|
int rtw_lps_chk_by_tp = 1;
|
|
/* WOW LPS configuration */
|
#ifdef CONFIG_WOWLAN
|
/* RTW_WOW_LPS_MODE=0:disable, 1:LPS , 2:LPS with clock gating, 3: power gating */
|
#if (RTW_WOW_LPS_MODE > 0)
|
int rtw_wow_power_mgnt = PM_PS_MODE_MAX;
|
int rtw_wow_lps_level = (RTW_WOW_LPS_MODE - 1);
|
#else
|
int rtw_wow_power_mgnt = PM_PS_MODE_ACTIVE;
|
int rtw_wow_lps_level = LPS_NORMAL;
|
#endif
|
#endif /* CONFIG_WOWLAN */
|
|
#else /* !CONFIG_POWER_SAVING */
|
int rtw_power_mgnt = PM_PS_MODE_ACTIVE;
|
int rtw_lps_level = LPS_NORMAL;
|
int rtw_lps_chk_by_tp = 0;
|
#ifdef CONFIG_WOWLAN
|
int rtw_wow_power_mgnt = PM_PS_MODE_ACTIVE;
|
int rtw_wow_lps_level = LPS_NORMAL;
|
#endif /* CONFIG_WOWLAN */
|
#endif /* CONFIG_POWER_SAVING */
|
#ifdef CONFIG_RTW_IPS
|
int rtw_ips_mode = PS_OP_MODE_AUTO;
|
#else
|
int rtw_ips_mode = PS_OP_MODE_DISABLED;
|
#endif
|
#ifdef CONFIG_RTW_LPS
|
int rtw_lps_mode = PS_OP_MODE_AUTO;
|
int rtw_lps_cap = PS_CAP_PWRON |
|
PS_CAP_RF_OFF |
|
PS_CAP_CLK_GATED |
|
PS_CAP_PWR_GATED;
|
#else
|
int rtw_lps_mode = PS_OP_MODE_DISABLED;
|
int rtw_lps_cap = PS_CAP_PWRON;
|
#endif
|
|
#ifdef CONFIG_NARROWBAND_SUPPORTING
|
int rtw_nb_config = CONFIG_NB_VALUE;
|
module_param(rtw_nb_config, int, 0644);
|
MODULE_PARM_DESC(rtw_nb_config, "5M/10M/Normal bandwidth configuration");
|
#endif
|
|
module_param(rtw_ips_mode, int, 0644);
|
MODULE_PARM_DESC(rtw_ips_mode, "The default IPS mode");
|
|
module_param(rtw_lps_mode, int, 0644);
|
MODULE_PARM_DESC(rtw_lps_mode, "The default LPS mode");
|
|
|
module_param(rtw_lps_cap, int, 0644);
|
MODULE_PARM_DESC(rtw_lps_cap, "The default LPS cap");
|
|
#ifdef CONFIG_LPS_1T1R
|
int rtw_lps_1t1r = RTW_LPS_1T1R;
|
module_param(rtw_lps_1t1r, int, 0644);
|
MODULE_PARM_DESC(rtw_lps_1t1r, "The default LPS 1T1R setting");
|
#endif
|
|
module_param(rtw_lps_chk_by_tp, int, 0644);
|
|
#ifdef CONFIG_WOWLAN
|
module_param(rtw_wow_power_mgnt, int, 0644);
|
MODULE_PARM_DESC(rtw_wow_power_mgnt, "The default WOW LPS mode");
|
module_param(rtw_wow_lps_level, int, 0644);
|
MODULE_PARM_DESC(rtw_wow_lps_level, "The default WOW LPS level");
|
#ifdef CONFIG_LPS_1T1R
|
int rtw_wow_lps_1t1r = RTW_WOW_LPS_1T1R;
|
module_param(rtw_wow_lps_1t1r, int, 0644);
|
MODULE_PARM_DESC(rtw_wow_lps_1t1r, "The default WOW LPS 1T1R setting");
|
#endif
|
#endif /* CONFIG_WOWLAN */
|
|
/* LPS:
|
* rtw_smart_ps = 0 => TX: pwr bit = 1, RX: PS_Poll
|
* rtw_smart_ps = 1 => TX: pwr bit = 0, RX: PS_Poll
|
* rtw_smart_ps = 2 => TX: pwr bit = 0, RX: NullData with pwr bit = 0
|
*/
|
int rtw_smart_ps = 2;
|
|
int rtw_max_bss_cnt = 0;
|
module_param(rtw_max_bss_cnt, int, 0644);
|
#ifdef CONFIG_WMMPS_STA
|
/* WMMPS:
|
* rtw_smart_ps = 0 => Only for fw test
|
* rtw_smart_ps = 1 => Refer to Beacon's TIM Bitmap
|
* rtw_smart_ps = 2 => Don't refer to Beacon's TIM Bitmap
|
*/
|
int rtw_wmm_smart_ps = 2;
|
#endif /* CONFIG_WMMPS_STA */
|
|
int rtw_check_fw_ps = 1;
|
|
#ifdef CONFIG_TX_EARLY_MODE
|
int rtw_early_mode = 1;
|
#endif
|
|
int rtw_usb_rxagg_mode = 2;/* RX_AGG_DMA=1, RX_AGG_USB=2 */
|
module_param(rtw_usb_rxagg_mode, int, 0644);
|
|
int rtw_dynamic_agg_enable = 1;
|
module_param(rtw_dynamic_agg_enable, int, 0644);
|
|
/* set log level when inserting driver module, default log level is _DRV_INFO_ = 4,
|
* please refer to "How_to_set_driver_debug_log_level.doc" to set the available level.
|
*/
|
#ifdef CONFIG_RTW_DEBUG
|
#ifdef RTW_LOG_LEVEL
|
uint rtw_drv_log_level = (uint)RTW_LOG_LEVEL; /* from Makefile */
|
#else
|
uint rtw_drv_log_level = _DRV_INFO_;
|
#endif
|
module_param(rtw_drv_log_level, uint, 0644);
|
MODULE_PARM_DESC(rtw_drv_log_level, "set log level when insert driver module, default log level is _DRV_INFO_ = 4");
|
#endif
|
int rtw_radio_enable = 1;
|
int rtw_long_retry_lmt = 7;
|
int rtw_short_retry_lmt = 7;
|
int rtw_busy_thresh = 40;
|
/* int qos_enable = 0; */ /* * */
|
int rtw_ack_policy = NORMAL_ACK;
|
|
int rtw_mp_mode = 0;
|
|
#if defined(CONFIG_MP_INCLUDED) && defined(CONFIG_RTW_CUSTOMER_STR)
|
uint rtw_mp_customer_str = 0;
|
module_param(rtw_mp_customer_str, uint, 0644);
|
MODULE_PARM_DESC(rtw_mp_customer_str, "Whether or not to enable customer str support on MP mode");
|
#endif
|
|
int rtw_software_encrypt = 0;
|
int rtw_software_decrypt = 0;
|
|
int rtw_acm_method = 0;/* 0:By SW 1:By HW. */
|
|
int rtw_wmm_enable = 1;/* default is set to enable the wmm. */
|
|
#ifdef CONFIG_WMMPS_STA
|
/* uapsd (unscheduled automatic power-save delivery) = a kind of wmmps */
|
/* 0: NO_LIMIT, 1: TWO_MSDU, 2: FOUR_MSDU, 3: SIX_MSDU */
|
int rtw_uapsd_max_sp = NO_LIMIT;
|
/* BIT0: AC_VO UAPSD, BIT1: AC_VI UAPSD, BIT2: AC_BK UAPSD, BIT3: AC_BE UAPSD */
|
int rtw_uapsd_ac_enable = 0x0;
|
#endif /* CONFIG_WMMPS_STA */
|
|
#if defined(CONFIG_RTL8821C) || defined(CONFIG_RTL8822B) || defined(CONFIG_RTL8822C)
|
/*PHYDM API, must enable by default*/
|
int rtw_pwrtrim_enable = 1;
|
#else
|
int rtw_pwrtrim_enable = 0; /* Default Enalbe power trim by efuse config */
|
#endif
|
|
uint rtw_tx_bw_mode = 0x21;
|
module_param(rtw_tx_bw_mode, uint, 0644);
|
MODULE_PARM_DESC(rtw_tx_bw_mode, "The max tx bw for 2.4G and 5G. format is the same as rtw_bw_mode");
|
|
|
#ifdef CONFIG_80211N_HT
|
int rtw_ht_enable = 1;
|
/* 0: 20 MHz, 1: 40 MHz, 2: 80 MHz, 3: 160MHz, 4: 80+80MHz
|
* 2.4G use bit 0 ~ 3, 5G use bit 4 ~ 7
|
* 0x21 means enable 2.4G 40MHz & 5G 80MHz */
|
#ifdef CONFIG_RTW_CUSTOMIZE_BWMODE
|
int rtw_bw_mode = CONFIG_RTW_CUSTOMIZE_BWMODE;
|
#else
|
int rtw_bw_mode = ((BW_CAP_80M | BW_CAP_40M | BW_CAP_20M) << 4 ) | (BW_CAP_40M | BW_CAP_20M);
|
#endif
|
|
int rtw_ampdu_enable = 1;/* for enable tx_ampdu , */ /* 0: disable, 0x1:enable */
|
|
int rtw_rx_ampdu_amsdu = 2;/* 0: disabled, 1:enabled, 2:auto . There is an IOT issu with DLINK DIR-629 when the flag turn on */
|
|
/* 10.12 A-MSDU operation
|
* HT - 0: 3839, 1: 7935 octets - Maximum A-MSDU Length
|
* VHT - 0: 3895, 1: 7991, 2:11454 octets - Maximum MPDU Length
|
*/
|
int rtw_max_amsdu_len = 1;
|
|
module_param(rtw_max_amsdu_len, uint, 0644);
|
|
/*
|
* 2: Follow the AMSDU filed in ADDBA Resp. (Deault)
|
* 0: Force the AMSDU filed in ADDBA Resp. to be disabled.
|
* 1: Force the AMSDU filed in ADDBA Resp. to be enabled.
|
*/
|
int rtw_tx_ampdu_amsdu = 2;
|
|
int rtw_quick_addba_req = 0;
|
|
static uint rtw_rx_ampdu_sz_limit_1ss[4] = CONFIG_RTW_RX_AMPDU_SZ_LIMIT_1SS;
|
static uint rtw_rx_ampdu_sz_limit_1ss_num = 0;
|
module_param_array(rtw_rx_ampdu_sz_limit_1ss, uint, &rtw_rx_ampdu_sz_limit_1ss_num, 0644);
|
MODULE_PARM_DESC(rtw_rx_ampdu_sz_limit_1ss, "RX AMPDU size limit for 1SS link of each BW, 0xFF: no limitation");
|
|
static uint rtw_rx_ampdu_sz_limit_2ss[4] = CONFIG_RTW_RX_AMPDU_SZ_LIMIT_2SS;
|
static uint rtw_rx_ampdu_sz_limit_2ss_num = 0;
|
module_param_array(rtw_rx_ampdu_sz_limit_2ss, uint, &rtw_rx_ampdu_sz_limit_2ss_num, 0644);
|
MODULE_PARM_DESC(rtw_rx_ampdu_sz_limit_2ss, "RX AMPDU size limit for 2SS link of each BW, 0xFF: no limitation");
|
|
static uint rtw_rx_ampdu_sz_limit_3ss[4] = CONFIG_RTW_RX_AMPDU_SZ_LIMIT_3SS;
|
static uint rtw_rx_ampdu_sz_limit_3ss_num = 0;
|
module_param_array(rtw_rx_ampdu_sz_limit_3ss, uint, &rtw_rx_ampdu_sz_limit_3ss_num, 0644);
|
MODULE_PARM_DESC(rtw_rx_ampdu_sz_limit_3ss, "RX AMPDU size limit for 3SS link of each BW, 0xFF: no limitation");
|
|
static uint rtw_rx_ampdu_sz_limit_4ss[4] = CONFIG_RTW_RX_AMPDU_SZ_LIMIT_4SS;
|
static uint rtw_rx_ampdu_sz_limit_4ss_num = 0;
|
module_param_array(rtw_rx_ampdu_sz_limit_4ss, uint, &rtw_rx_ampdu_sz_limit_4ss_num, 0644);
|
MODULE_PARM_DESC(rtw_rx_ampdu_sz_limit_4ss, "RX AMPDU size limit for 4SS link of each BW, 0xFF: no limitation");
|
|
/* Short GI support Bit Map
|
* BIT0 - 20MHz, 0: non-support, 1: support
|
* BIT1 - 40MHz, 0: non-support, 1: support
|
* BIT2 - 80MHz, 0: non-support, 1: support
|
* BIT3 - 160MHz, 0: non-support, 1: support */
|
int rtw_short_gi = 0xf;
|
/* BIT0: Enable VHT LDPC Rx, BIT1: Enable VHT LDPC Tx, BIT4: Enable HT LDPC Rx, BIT5: Enable HT LDPC Tx */
|
int rtw_ldpc_cap = 0x33;
|
/* BIT0: Enable VHT STBC Rx, BIT1: Enable VHT STBC Tx
|
* BIT4: Enable HT STBC Rx, BIT5: Enable HT STBC Tx
|
* BIT8: Enable HE STBC Rx, BIT9: Enable HE STBC Rx(greater than 80M)
|
* BIT10: Enable HE STBC Tx, BIT11: Enable HE STBC Tx(greater than 80M)
|
*/
|
int rtw_stbc_cap = 0x133;
|
#endif /* CONFIG_80211N_HT */
|
|
#ifdef CONFIG_BEAMFORMING
|
/*
|
* BIT0: Enable VHT SU Beamformer
|
* BIT1: Enable VHT SU Beamformee
|
* BIT2: Enable VHT MU Beamformer, depend on VHT SU Beamformer
|
* BIT3: Enable VHT MU Beamformee, depend on VHT SU Beamformee
|
* BIT4: Enable HT Beamformer
|
* BIT5: Enable HT Beamformee
|
* BIT6: Enable HE SU Beamformer
|
* BIT7: Enable HE SU Beamformee
|
* BIT8: Enable HE MU Beamformer
|
* BIT9: Enable HE MU Beamformee
|
*/
|
int rtw_beamform_cap = BIT(1) | BIT(7); /* For sw role BF cap. */
|
int rtw_sw_proto_bf_cap_phy0 = BIT(1) | BIT(7);
|
int rtw_sw_proto_bf_cap_phy1 = BIT(1) | BIT(7);
|
int rtw_dyn_txbf = 1;
|
int rtw_bfer_rf_number = 0; /*BeamformerCapRfNum Rf path number, 0 for auto, others for manual*/
|
int rtw_bfee_rf_number = 0; /*BeamformeeCapRfNum Rf path number, 0 for auto, others for manual*/
|
#endif
|
|
#ifdef CONFIG_80211AC_VHT
|
int rtw_vht_enable = 1; /* 0:disable, 1:enable, 2:force auto enable */
|
module_param(rtw_vht_enable, int, 0644);
|
|
int rtw_vht_24g_enable = 0; /* 0:disable, 1:enable */
|
module_param(rtw_vht_24g_enable, int, 0644);
|
|
int rtw_ampdu_factor = 7;
|
|
uint rtw_vht_rx_mcs_map = 0xaaaa;
|
module_param(rtw_vht_rx_mcs_map, uint, 0644);
|
MODULE_PARM_DESC(rtw_vht_rx_mcs_map, "VHT RX MCS map");
|
#endif /* CONFIG_80211AC_VHT */
|
|
#ifdef CONFIG_80211AX_HE
|
int rtw_he_enable = 1; /* 0:disable, 1:enable, 2:force auto enable */
|
module_param(rtw_he_enable, int, 0644);
|
#endif
|
|
int rtw_lowrate_two_xmit = 1;/* Use 2 path Tx to transmit MCS0~7 and legacy mode */
|
|
|
/* 0: not check in watch dog, 1: check in watch dog */
|
int rtw_check_hw_status = 0;
|
|
int rtw_low_power = 0;
|
int rtw_wifi_spec = 0;
|
|
#ifdef CONFIG_SPECIAL_RF_PATH /* configure Nss/xTxR IC to 1ss/1T1R */
|
int rtw_rf_path = RF_1T1R;
|
int rtw_tx_nss = 1;
|
int rtw_rx_nss = 1;
|
#else
|
int rtw_rf_path = RF_TYPE_MAX;
|
int rtw_tx_nss = 0;
|
int rtw_rx_nss = 0;
|
#endif
|
module_param(rtw_rf_path, int, 0644);
|
module_param(rtw_tx_nss, int, 0644);
|
module_param(rtw_rx_nss, int, 0644);
|
|
#ifdef CONFIG_REGD_SRC_FROM_OS
|
static uint rtw_regd_src = CONFIG_RTW_REGD_SRC;
|
module_param(rtw_regd_src, uint, 0644);
|
MODULE_PARM_DESC(rtw_regd_src, "The default regd source selection, 0:Realtek defined, 1: OS");
|
#endif
|
|
char rtw_country_unspecified[] = {0xFF, 0xFF, 0x00};
|
char *rtw_country_code = rtw_country_unspecified;
|
module_param(rtw_country_code, charp, 0644);
|
MODULE_PARM_DESC(rtw_country_code, "The default country code (in alpha2)");
|
|
uint rtw_channel_plan = CONFIG_RTW_CHPLAN;
|
module_param(rtw_channel_plan, uint, 0644);
|
MODULE_PARM_DESC(rtw_channel_plan, "The default chplan ID when rtw_alpha2 is not specified or valid");
|
|
static uint rtw_excl_chs[MAX_CHANNEL_NUM_2G_5G] = CONFIG_RTW_EXCL_CHS;
|
static int rtw_excl_chs_num = 0;
|
module_param_array(rtw_excl_chs, uint, &rtw_excl_chs_num, 0644);
|
MODULE_PARM_DESC(rtw_excl_chs, "exclusive channel array");
|
|
#if CONFIG_IEEE80211_BAND_6GHZ
|
uint rtw_channel_plan_6g = CONFIG_RTW_CHPLAN_6G;
|
module_param(rtw_channel_plan_6g, uint, 0644);
|
MODULE_PARM_DESC(rtw_channel_plan_6g, "The default chplan_6g ID when rtw_alpha2 is not specified or valid");
|
|
static uint rtw_excl_chs_6g[MAX_CHANNEL_NUM_6G] = CONFIG_RTW_EXCL_CHS_6G;
|
static int rtw_excl_chs_6g_num = 0;
|
module_param_array(rtw_excl_chs_6g, uint, &rtw_excl_chs_6g_num, 0644);
|
MODULE_PARM_DESC(rtw_excl_chs_6g, "exclusive channel array");
|
#endif /* CONFIG_IEEE80211_BAND_6GHZ */
|
|
#ifdef CONFIG_80211D
|
static uint rtw_country_ie_slave_en_role = CONFIG_RTW_COUNTRY_IE_SLAVE_EN_ROLE;
|
module_param(rtw_country_ie_slave_en_role, uint, 0644);
|
MODULE_PARM_DESC(rtw_country_ie_slave_en_role, "802.11d country IE slave enable role: BIT0:pure STA mode, BIT1:P2P group client");
|
|
static uint rtw_country_ie_slave_en_ifbmp = CONFIG_RTW_COUNTRY_IE_SLAVE_EN_IFBMP;
|
module_param(rtw_country_ie_slave_en_ifbmp, uint, 0644);
|
MODULE_PARM_DESC(rtw_country_ie_slave_en_ifbmp, "802.11d country IE slave enable iface bitmap");
|
#endif
|
|
/*if concurrent softap + p2p(GO) is needed, this param lets p2p response full channel list.
|
But Softap must be SHUT DOWN once P2P decide to set up connection and become a GO.*/
|
#ifdef CONFIG_FULL_CH_IN_P2P_HANDSHAKE
|
int rtw_full_ch_in_p2p_handshake = 1; /* reply full channel list*/
|
#else
|
int rtw_full_ch_in_p2p_handshake = 0; /* reply only softap channel*/
|
#endif
|
|
#ifdef CONFIG_BTC
|
int rtw_btcoex_enable = 2;
|
module_param(rtw_btcoex_enable, int, 0644);
|
MODULE_PARM_DESC(rtw_btcoex_enable, "BT co-existence on/off, 0:off, 1:on, 2:by efuse");
|
|
int rtw_ant_num = 0;
|
module_param(rtw_ant_num, int, 0644);
|
MODULE_PARM_DESC(rtw_ant_num, "Antenna number setting, 0:by efuse");
|
|
int rtw_bt_iso = 2;/* 0:Low, 1:High, 2:From Efuse */
|
int rtw_bt_sco = 3;/* 0:Idle, 1:None-SCO, 2:SCO, 3:From Counter, 4.Busy, 5.OtherBusy */
|
int rtw_bt_ampdu = 1 ; /* 0:Disable BT control A-MPDU, 1:Enable BT control A-MPDU. */
|
#endif /* CONFIG_BTC */
|
|
int rtw_AcceptAddbaReq = _TRUE;/* 0:Reject AP's Add BA req, 1:Accept AP's Add BA req. */
|
|
int rtw_antdiv_cfg = 2; /* 0:OFF , 1:ON, 2:decide by Efuse config */
|
int rtw_antdiv_type = 0; /* 0:decide by efuse 1: for 88EE, 1Tx and 1RxCG are diversity.(2 Ant with SPDT), 2: for 88EE, 1Tx and 2Rx are diversity.( 2 Ant, Tx and RxCG are both on aux port, RxCS is on main port ), 3: for 88EE, 1Tx and 1RxCG are fixed.(1Ant, Tx and RxCG are both on aux port) */
|
|
int rtw_drv_ant_band_switch = 1; /* 0:OFF , 1:ON, Driver control antenna band switch*/
|
|
int rtw_single_ant_path; /*0:main ant , 1:aux ant , Fixed single antenna path, default main ant*/
|
|
/* 0: doesn't switch, 1: switch to usb 3.0 , 2: switch to usb 2.0 */
|
int rtw_switch_usb_mode = 0;
|
|
|
|
#ifdef CONFIG_HW_PWRP_DETECTION
|
int rtw_hwpwrp_detect = 1;
|
#else
|
int rtw_hwpwrp_detect = 0; /* HW power ping detect 0:disable , 1:enable */
|
#endif
|
|
#ifdef CONFIG_USB_HCI
|
int rtw_hw_wps_pbc = 1;
|
#else
|
int rtw_hw_wps_pbc = 0;
|
#endif
|
|
#ifdef CONFIG_PCI_ASPM
|
/* CLK_REQ:BIT0 L0s:BIT1 ASPM_L1:BIT2 L1Off:BIT3*/
|
int rtw_pci_aspm_enable = 0x5;
|
#else
|
int rtw_pci_aspm_enable;
|
#endif
|
|
/*
|
* BIT [15:12] mask of ps mode
|
* BIT [11:8] val of ps mode
|
* BIT [7:4] mask of perf mode
|
* BIT [3:0] val of perf mode
|
*
|
* L0s:BIT[+0] L1:BIT[+1]
|
*
|
* 0x0030: change value only if perf mode
|
* 0x3300: change value only if ps mode
|
* 0x3330: change value in both perf and ps mode
|
*/
|
#ifdef CONFIG_PCI_DYNAMIC_ASPM
|
#ifdef CONFIG_PCI_ASPM
|
int rtw_pci_dynamic_aspm_linkctrl = 0x3330;
|
#else
|
int rtw_pci_dynamic_aspm_linkctrl = 0x0030;
|
#endif
|
#else
|
int rtw_pci_dynamic_aspm_linkctrl = 0x0000;
|
#endif
|
module_param(rtw_pci_dynamic_aspm_linkctrl, int, 0644);
|
|
#ifdef CONFIG_QOS_OPTIMIZATION
|
int rtw_qos_opt_enable = 1; /* 0: disable,1:enable */
|
#else
|
int rtw_qos_opt_enable = 0; /* 0: disable,1:enable */
|
#endif
|
module_param(rtw_qos_opt_enable, int, 0644);
|
|
#ifdef CONFIG_RTW_ACS
|
int rtw_acs_auto_scan = 0; /*0:disable, 1:enable*/
|
module_param(rtw_acs_auto_scan, int, 0644);
|
|
int rtw_acs = 1;
|
module_param(rtw_acs, int, 0644);
|
#endif
|
|
char *ifname = "wlan%d";
|
module_param(ifname, charp, 0644);
|
MODULE_PARM_DESC(ifname, "The default name to allocate for first interface");
|
|
#ifdef CONFIG_PLATFORM_ANDROID
|
char *if2name = "p2p%d";
|
#else /* CONFIG_PLATFORM_ANDROID */
|
char *if2name = "wlan%d";
|
#endif /* CONFIG_PLATFORM_ANDROID */
|
module_param(if2name, charp, 0644);
|
MODULE_PARM_DESC(if2name, "The default name to allocate for second interface");
|
|
char *rtw_initmac = 0; /* temp mac address if users want to use instead of the mac address in Efuse */
|
|
#ifdef CONFIG_CONCURRENT_MODE
|
|
#if (CONFIG_IFACE_NUMBER > 2)
|
int rtw_virtual_iface_num = CONFIG_IFACE_NUMBER - 1;
|
module_param(rtw_virtual_iface_num, int, 0644);
|
#else
|
int rtw_virtual_iface_num = 1;
|
#endif
|
|
#if defined(CONFIG_CONCURRENT_MODE) && !RTW_P2P_GROUP_INTERFACE
|
#ifdef CONFIG_P2P
|
#ifdef CONFIG_SEL_P2P_IFACE
|
int rtw_sel_p2p_iface = CONFIG_SEL_P2P_IFACE;
|
#else
|
int rtw_sel_p2p_iface = (CONFIG_RTW_STATIC_NDEV_NUM - 1);
|
#endif
|
|
module_param(rtw_sel_p2p_iface, int, 0644);
|
|
#endif
|
#endif
|
|
#ifdef CONFIG_IGNORE_GO_AND_LOW_RSSI_IN_SCAN_LIST
|
int rtw_ignore_go_in_scan = 1;
|
uint rtw_ignore_low_rssi_in_scan = 30;
|
|
module_param(rtw_ignore_go_in_scan, int, 0644);
|
module_param(rtw_ignore_low_rssi_in_scan, uint, 0644);
|
#endif /*CONFIG_IGNORE_GO_AND_LOW_RSSI_IN_SCAN_LIST*/
|
|
#endif
|
|
/* affect ap/go cw only so far , 0 is no change*/
|
uint rtw_vo_edca = 0;
|
module_param(rtw_vo_edca, uint, 0644);
|
|
#ifdef CONFIG_AP_MODE
|
u8 rtw_bmc_tx_rate = MGN_UNKNOWN;
|
|
#if CONFIG_RTW_AP_DATA_BMC_TO_UC
|
int rtw_ap_src_b2u_flags = CONFIG_RTW_AP_SRC_B2U_FLAGS;
|
module_param(rtw_ap_src_b2u_flags, int, 0644);
|
|
int rtw_ap_fwd_b2u_flags = CONFIG_RTW_AP_FWD_B2U_FLAGS;
|
module_param(rtw_ap_fwd_b2u_flags, int, 0644);
|
#endif /* CONFIG_RTW_AP_DATA_BMC_TO_UC */
|
#endif /* CONFIG_AP_MODE */
|
|
#ifdef CONFIG_RTW_MESH
|
#if CONFIG_RTW_MESH_DATA_BMC_TO_UC
|
int rtw_msrc_b2u_flags = CONFIG_RTW_MSRC_B2U_FLAGS;
|
module_param(rtw_msrc_b2u_flags, int, 0644);
|
|
int rtw_mfwd_b2u_flags = CONFIG_RTW_MFWD_B2U_FLAGS;
|
module_param(rtw_mfwd_b2u_flags, int, 0644);
|
#endif /* CONFIG_RTW_MESH_DATA_BMC_TO_UC */
|
#endif /* CONFIG_RTW_MESH */
|
|
#ifdef RTW_WOW_STA_MIX
|
int rtw_wowlan_sta_mix_mode = 1;
|
#else
|
int rtw_wowlan_sta_mix_mode = 0;
|
#endif
|
module_param(rtw_wowlan_sta_mix_mode, int, 0644);
|
module_param(rtw_pwrtrim_enable, int, 0644);
|
module_param(rtw_initmac, charp, 0644);
|
module_param(rtw_chip_version, int, 0644);
|
module_param(rtw_rfintfs, int, 0644);
|
module_param(rtw_lbkmode, int, 0644);
|
module_param(rtw_network_mode, int, 0644);
|
module_param(rtw_channel, int, 0644);
|
module_param(rtw_mp_mode, int, 0644);
|
module_param(rtw_wmm_enable, int, 0644);
|
#ifdef CONFIG_WMMPS_STA
|
module_param(rtw_uapsd_max_sp, int, 0644);
|
module_param(rtw_uapsd_ac_enable, int, 0644);
|
module_param(rtw_wmm_smart_ps, int, 0644);
|
#endif /* CONFIG_WMMPS_STA */
|
module_param(rtw_vrtl_carrier_sense, int, 0644);
|
module_param(rtw_vcs_type, int, 0644);
|
module_param(rtw_hw_rts_en, int, 0644);
|
module_param(rtw_busy_thresh, int, 0644);
|
|
#ifdef CONFIG_80211N_HT
|
module_param(rtw_ht_enable, int, 0644);
|
module_param(rtw_bw_mode, int, 0644);
|
module_param(rtw_ampdu_enable, int, 0644);
|
module_param(rtw_stbc_cap, int, 0644);
|
module_param(rtw_rx_ampdu_amsdu, int, 0644);
|
module_param(rtw_tx_ampdu_amsdu, int, 0644);
|
module_param(rtw_quick_addba_req, int, 0644);
|
#endif /* CONFIG_80211N_HT */
|
|
#ifdef CONFIG_BEAMFORMING
|
module_param(rtw_beamform_cap, int, 0644);
|
module_param(rtw_sw_proto_bf_cap_phy0, int, 0644);
|
module_param(rtw_sw_proto_bf_cap_phy1, int, 0644);
|
module_param(rtw_dyn_txbf, int, 0644);
|
#endif
|
module_param(rtw_lowrate_two_xmit, int, 0644);
|
|
module_param(rtw_power_mgnt, int, 0644);
|
module_param(rtw_smart_ps, int, 0644);
|
module_param(rtw_low_power, int, 0644);
|
module_param(rtw_wifi_spec, int, 0644);
|
|
module_param(rtw_full_ch_in_p2p_handshake, int, 0644);
|
module_param(rtw_antdiv_cfg, int, 0644);
|
module_param(rtw_antdiv_type, int, 0644);
|
|
module_param(rtw_drv_ant_band_switch, int, 0644);
|
module_param(rtw_single_ant_path, int, 0644);
|
|
module_param(rtw_switch_usb_mode, int, 0644);
|
|
module_param(rtw_hwpwrp_detect, int, 0644);
|
|
module_param(rtw_hw_wps_pbc, int, 0644);
|
module_param(rtw_check_hw_status, int, 0644);
|
|
#ifdef CONFIG_PCI_HCI
|
module_param(rtw_pci_aspm_enable, int, 0644);
|
#endif
|
|
#ifdef CONFIG_TX_EARLY_MODE
|
module_param(rtw_early_mode, int, 0644);
|
#endif
|
#ifdef CONFIG_ADAPTOR_INFO_CACHING_FILE
|
char *rtw_adaptor_info_caching_file_path = "/data/misc/wifi/rtw_cache";
|
module_param(rtw_adaptor_info_caching_file_path, charp, 0644);
|
MODULE_PARM_DESC(rtw_adaptor_info_caching_file_path, "The path of adapter info cache file");
|
#endif /* CONFIG_ADAPTOR_INFO_CACHING_FILE */
|
|
#ifdef CONFIG_LAYER2_ROAMING
|
uint rtw_max_roaming_times = 2;
|
module_param(rtw_max_roaming_times, uint, 0644);
|
MODULE_PARM_DESC(rtw_max_roaming_times, "The max roaming times to try");
|
#endif /* CONFIG_LAYER2_ROAMING */
|
|
#ifdef CONFIG_FILE_FWIMG
|
char *rtw_fw_file_path = CONFIG_FIRMWARE_PATH; /* "/system/etc/firmware/rtlwifi/FW_NIC.BIN"; */
|
|
module_param(rtw_fw_file_path, charp, 0644);
|
MODULE_PARM_DESC(rtw_fw_file_path, "The path of fw image");
|
|
char *rtw_fw_wow_file_path = "/system/etc/firmware/rtlwifi/FW_WoWLAN.BIN";
|
module_param(rtw_fw_wow_file_path, charp, 0644);
|
MODULE_PARM_DESC(rtw_fw_wow_file_path, "The path of fw for Wake on Wireless image");
|
|
#ifdef CONFIG_MP_INCLUDED
|
char *rtw_fw_mp_bt_file_path = "";
|
module_param(rtw_fw_mp_bt_file_path, charp, 0644);
|
MODULE_PARM_DESC(rtw_fw_mp_bt_file_path, "The path of fw for MP-BT image");
|
#endif /* CONFIG_MP_INCLUDED */
|
#endif /* CONFIG_FILE_FWIMG */
|
|
uint rtw_hiq_filter = CONFIG_RTW_HIQ_FILTER;
|
module_param(rtw_hiq_filter, uint, 0644);
|
MODULE_PARM_DESC(rtw_hiq_filter, "0:allow all, 1:allow special, 2:deny all");
|
|
uint rtw_adaptivity_en = CONFIG_RTW_ADAPTIVITY_EN;
|
module_param(rtw_adaptivity_en, uint, 0644);
|
MODULE_PARM_DESC(rtw_adaptivity_en, "0:disable, 1:enable, 2:auto");
|
|
uint rtw_adaptivity_mode = CONFIG_RTW_ADAPTIVITY_MODE;
|
module_param(rtw_adaptivity_mode, uint, 0644);
|
MODULE_PARM_DESC(rtw_adaptivity_mode, "0:normal, 1:carrier sense");
|
|
int rtw_adaptivity_th_l2h_ini = CONFIG_RTW_ADAPTIVITY_TH_L2H_INI;
|
module_param(rtw_adaptivity_th_l2h_ini, int, 0644);
|
MODULE_PARM_DESC(rtw_adaptivity_th_l2h_ini, "th_l2h_ini for Adaptivity");
|
|
int rtw_adaptivity_th_edcca_hl_diff = CONFIG_RTW_ADAPTIVITY_TH_EDCCA_HL_DIFF;
|
module_param(rtw_adaptivity_th_edcca_hl_diff, int, 0644);
|
MODULE_PARM_DESC(rtw_adaptivity_th_edcca_hl_diff, "th_edcca_hl_diff for Adaptivity");
|
|
#ifdef CONFIG_DFS_MASTER
|
uint rtw_dfs_region_domain = CONFIG_RTW_DFS_REGION_DOMAIN;
|
module_param(rtw_dfs_region_domain, uint, 0644);
|
MODULE_PARM_DESC(rtw_dfs_region_domain, "0:NONE, 1:FCC, 2:MKK, 3:ETSI");
|
#endif
|
|
uint rtw_amsdu_mode = RTW_AMSDU_MODE_NON_SPP;
|
module_param(rtw_amsdu_mode, uint, 0644);
|
MODULE_PARM_DESC(rtw_amsdu_mode, "0:non-spp, 1:spp, 2:all drop");
|
|
uint rtw_amplifier_type_2g = CONFIG_RTW_AMPLIFIER_TYPE_2G;
|
module_param(rtw_amplifier_type_2g, uint, 0644);
|
MODULE_PARM_DESC(rtw_amplifier_type_2g, "BIT3:2G ext-PA, BIT4:2G ext-LNA");
|
|
uint rtw_amplifier_type_5g = CONFIG_RTW_AMPLIFIER_TYPE_5G;
|
module_param(rtw_amplifier_type_5g, uint, 0644);
|
MODULE_PARM_DESC(rtw_amplifier_type_5g, "BIT6:5G ext-PA, BIT7:5G ext-LNA");
|
|
uint rtw_rfe_type = CONFIG_RTW_RFE_TYPE;
|
module_param(rtw_rfe_type, uint, 0644);
|
MODULE_PARM_DESC(rtw_rfe_type, "default init value:64");
|
|
#ifdef CONFIG_DBCC_SUPPORT
|
/*0:disable ,1: enable*/
|
int rtw_dbcc_en = 0;
|
module_param(rtw_dbcc_en, int, 0644);
|
MODULE_PARM_DESC(rtw_dbcc_en, "0:Disable, 1:Enable DBCC");
|
#endif
|
|
uint rtw_powertracking_type = 64;
|
module_param(rtw_powertracking_type, uint, 0644);
|
MODULE_PARM_DESC(rtw_powertracking_type, "default init value:64");
|
|
uint rtw_GLNA_type = CONFIG_RTW_GLNA_TYPE;
|
module_param(rtw_GLNA_type, uint, 0644);
|
MODULE_PARM_DESC(rtw_GLNA_type, "default init value:0");
|
|
uint rtw_TxBBSwing_2G = 0xFF;
|
module_param(rtw_TxBBSwing_2G, uint, 0644);
|
MODULE_PARM_DESC(rtw_TxBBSwing_2G, "default init value:0xFF");
|
|
uint rtw_TxBBSwing_5G = 0xFF;
|
module_param(rtw_TxBBSwing_5G, uint, 0644);
|
MODULE_PARM_DESC(rtw_TxBBSwing_5G, "default init value:0xFF");
|
|
uint rtw_OffEfuseMask = 0;
|
module_param(rtw_OffEfuseMask, uint, 0644);
|
MODULE_PARM_DESC(rtw_OffEfuseMask, "default open Efuse Mask value:0");
|
|
uint rtw_FileMaskEfuse = 0;
|
module_param(rtw_FileMaskEfuse, uint, 0644);
|
MODULE_PARM_DESC(rtw_FileMaskEfuse, "default drv Mask Efuse value:0");
|
|
uint rtw_rxgain_offset_2g = 0;
|
module_param(rtw_rxgain_offset_2g, uint, 0644);
|
MODULE_PARM_DESC(rtw_rxgain_offset_2g, "default RF Gain 2G Offset value:0");
|
|
uint rtw_rxgain_offset_5gl = 0;
|
module_param(rtw_rxgain_offset_5gl, uint, 0644);
|
MODULE_PARM_DESC(rtw_rxgain_offset_5gl, "default RF Gain 5GL Offset value:0");
|
|
uint rtw_rxgain_offset_5gm = 0;
|
module_param(rtw_rxgain_offset_5gm, uint, 0644);
|
MODULE_PARM_DESC(rtw_rxgain_offset_5gm, "default RF Gain 5GM Offset value:0");
|
|
uint rtw_rxgain_offset_5gh = 0;
|
module_param(rtw_rxgain_offset_5gh, uint, 0644);
|
MODULE_PARM_DESC(rtw_rxgain_offset_5gm, "default RF Gain 5GL Offset value:0");
|
|
uint rtw_pll_ref_clk_sel = CONFIG_RTW_PLL_REF_CLK_SEL;
|
module_param(rtw_pll_ref_clk_sel, uint, 0644);
|
MODULE_PARM_DESC(rtw_pll_ref_clk_sel, "force pll_ref_clk_sel, 0xF:use autoload value");
|
|
int rtw_tx_pwr_by_rate = CONFIG_TXPWR_BY_RATE_EN;
|
module_param(rtw_tx_pwr_by_rate, int, 0644);
|
MODULE_PARM_DESC(rtw_tx_pwr_by_rate, "0:Disable, 1:Enable, 2: Depend on efuse");
|
|
#if CONFIG_TXPWR_LIMIT
|
int rtw_tx_pwr_lmt_enable = CONFIG_TXPWR_LIMIT_EN;
|
module_param(rtw_tx_pwr_lmt_enable, int, 0644);
|
MODULE_PARM_DESC(rtw_tx_pwr_lmt_enable, "0:Disable, 1:Enable, 2: Depend on efuse");
|
#endif
|
|
static int rtw_target_tx_pwr_2g_a[RATE_SECTION_NUM] = CONFIG_RTW_TARGET_TX_PWR_2G_A;
|
static int rtw_target_tx_pwr_2g_a_num = 0;
|
module_param_array(rtw_target_tx_pwr_2g_a, int, &rtw_target_tx_pwr_2g_a_num, 0644);
|
MODULE_PARM_DESC(rtw_target_tx_pwr_2g_a, "2.4G target tx power (unit:dBm) of RF path A for each rate section, should match the real calibrate power, -1: undefined");
|
|
static int rtw_target_tx_pwr_2g_b[RATE_SECTION_NUM] = CONFIG_RTW_TARGET_TX_PWR_2G_B;
|
static int rtw_target_tx_pwr_2g_b_num = 0;
|
module_param_array(rtw_target_tx_pwr_2g_b, int, &rtw_target_tx_pwr_2g_b_num, 0644);
|
MODULE_PARM_DESC(rtw_target_tx_pwr_2g_b, "2.4G target tx power (unit:dBm) of RF path B for each rate section, should match the real calibrate power, -1: undefined");
|
|
static int rtw_target_tx_pwr_2g_c[RATE_SECTION_NUM] = CONFIG_RTW_TARGET_TX_PWR_2G_C;
|
static int rtw_target_tx_pwr_2g_c_num = 0;
|
module_param_array(rtw_target_tx_pwr_2g_c, int, &rtw_target_tx_pwr_2g_c_num, 0644);
|
MODULE_PARM_DESC(rtw_target_tx_pwr_2g_c, "2.4G target tx power (unit:dBm) of RF path C for each rate section, should match the real calibrate power, -1: undefined");
|
|
static int rtw_target_tx_pwr_2g_d[RATE_SECTION_NUM] = CONFIG_RTW_TARGET_TX_PWR_2G_D;
|
static int rtw_target_tx_pwr_2g_d_num = 0;
|
module_param_array(rtw_target_tx_pwr_2g_d, int, &rtw_target_tx_pwr_2g_d_num, 0644);
|
MODULE_PARM_DESC(rtw_target_tx_pwr_2g_d, "2.4G target tx power (unit:dBm) of RF path D for each rate section, should match the real calibrate power, -1: undefined");
|
|
#if CONFIG_IEEE80211_BAND_5GHZ
|
static int rtw_target_tx_pwr_5g_a[RATE_SECTION_NUM - 1] = CONFIG_RTW_TARGET_TX_PWR_5G_A;
|
static int rtw_target_tx_pwr_5g_a_num = 0;
|
module_param_array(rtw_target_tx_pwr_5g_a, int, &rtw_target_tx_pwr_5g_a_num, 0644);
|
MODULE_PARM_DESC(rtw_target_tx_pwr_5g_a, "5G target tx power (unit:dBm) of RF path A for each rate section, should match the real calibrate power, -1: undefined");
|
|
static int rtw_target_tx_pwr_5g_b[RATE_SECTION_NUM - 1] = CONFIG_RTW_TARGET_TX_PWR_5G_B;
|
static int rtw_target_tx_pwr_5g_b_num = 0;
|
module_param_array(rtw_target_tx_pwr_5g_b, int, &rtw_target_tx_pwr_5g_b_num, 0644);
|
MODULE_PARM_DESC(rtw_target_tx_pwr_5g_b, "5G target tx power (unit:dBm) of RF path B for each rate section, should match the real calibrate power, -1: undefined");
|
|
static int rtw_target_tx_pwr_5g_c[RATE_SECTION_NUM - 1] = CONFIG_RTW_TARGET_TX_PWR_5G_C;
|
static int rtw_target_tx_pwr_5g_c_num = 0;
|
module_param_array(rtw_target_tx_pwr_5g_c, int, &rtw_target_tx_pwr_5g_c_num, 0644);
|
MODULE_PARM_DESC(rtw_target_tx_pwr_5g_c, "5G target tx power (unit:dBm) of RF path C for each rate section, should match the real calibrate power, -1: undefined");
|
|
static int rtw_target_tx_pwr_5g_d[RATE_SECTION_NUM - 1] = CONFIG_RTW_TARGET_TX_PWR_5G_D;
|
static int rtw_target_tx_pwr_5g_d_num = 0;
|
module_param_array(rtw_target_tx_pwr_5g_d, int, &rtw_target_tx_pwr_5g_d_num, 0644);
|
MODULE_PARM_DESC(rtw_target_tx_pwr_5g_d, "5G target tx power (unit:dBm) of RF path D for each rate section, should match the real calibrate power, -1: undefined");
|
#endif /* CONFIG_IEEE80211_BAND_5GHZ */
|
|
#ifdef CONFIG_RTW_TX_NPATH_EN
|
/*0:disable ,1: 2path*/
|
int rtw_tx_npath_enable = 1;
|
module_param(rtw_tx_npath_enable, int, 0644);
|
MODULE_PARM_DESC(rtw_tx_npath_enable, "0:Disable, 1:TX-2PATH");
|
#endif
|
|
#ifdef CONFIG_RTW_PATH_DIV
|
/*0:disable ,1: path diversity*/
|
int rtw_path_div_enable = 1;
|
module_param(rtw_path_div_enable, int, 0644);
|
MODULE_PARM_DESC(rtw_path_div_enable, "0:Disable, 1:Enable path diversity");
|
#endif
|
|
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
|
char *rtw_phy_file_path = REALTEK_CONFIG_PATH;
|
module_param(rtw_phy_file_path, charp, 0644);
|
MODULE_PARM_DESC(rtw_phy_file_path, "The path of phy parameter");
|
/* PHY FILE Bit Map
|
* BIT0 - MAC_REG, 0: non-support, 1: support
|
* BIT1 - BB_PHY_REG, 0: non-support, 1: support
|
* BIT2 - BB_PHY_REG_MP, 0: non-support, 1: support
|
* BIT3 - RF_RADIO, 0: non-support, 1: support
|
* BIT4 - RF_TXPWR_BY_RATE, 0: non-support, 1: support
|
* BIT5 - RF_TXPWR_TRACK, 0: non-support, 1: support
|
* BIT6 - RF_TXPWR_LMT, 0: non-support, 1: support
|
* BIT7 - RF_TXPWR_LMT_RU, 0: non-support, 1: support*/
|
int rtw_load_phy_file = (BIT1 | BIT3);
|
module_param(rtw_load_phy_file, int, 0644);
|
MODULE_PARM_DESC(rtw_load_phy_file, "PHY File Bit Map");
|
int rtw_decrypt_phy_file = 0;
|
module_param(rtw_decrypt_phy_file, int, 0644);
|
MODULE_PARM_DESC(rtw_decrypt_phy_file, "Enable Decrypt PHY File");
|
#endif
|
|
|
uint rtw_phydm_ability = 0xffffffff;
|
module_param(rtw_phydm_ability, uint, 0644);
|
|
uint rtw_halrf_ability = 0xffffffff;
|
module_param(rtw_halrf_ability, uint, 0644);
|
|
#ifdef CONFIG_RTW_MESH
|
uint rtw_peer_alive_based_preq = 1;
|
module_param(rtw_peer_alive_based_preq, uint, 0644);
|
MODULE_PARM_DESC(rtw_peer_alive_based_preq,
|
"On demand PREQ will reference peer alive status. 0: Off, 1: On");
|
#endif
|
|
#ifdef CONFIG_RTW_NAPI
|
/*following setting should define NAPI in Makefile
|
enable napi only = 1, disable napi = 0*/
|
int rtw_en_napi = 1;
|
module_param(rtw_en_napi, int, 0644);
|
#ifdef CONFIG_RTW_NAPI_DYNAMIC
|
int rtw_napi_threshold = 100; /* unit: Mbps */
|
module_param(rtw_napi_threshold, int, 0644);
|
#endif /* CONFIG_RTW_NAPI_DYNAMIC */
|
#ifdef CONFIG_RTW_GRO
|
/*following setting should define GRO in Makefile
|
enable gro = 1, disable gro = 0*/
|
int rtw_en_gro = 1;
|
module_param(rtw_en_gro, int, 0644);
|
#endif /* CONFIG_RTW_GRO */
|
#endif /* CONFIG_RTW_NAPI */
|
|
#ifdef RTW_IQK_FW_OFFLOAD
|
int rtw_iqk_fw_offload = 1;
|
#else
|
int rtw_iqk_fw_offload;
|
#endif /* RTW_IQK_FW_OFFLOAD */
|
module_param(rtw_iqk_fw_offload, int, 0644);
|
|
#ifdef RTW_CHANNEL_SWITCH_OFFLOAD
|
int rtw_ch_switch_offload = 0;
|
#else
|
int rtw_ch_switch_offload;
|
#endif /* RTW_CHANNEL_SWITCH_OFFLOAD */
|
module_param(rtw_ch_switch_offload, int, 0644);
|
|
#ifdef CONFIG_TDLS
|
int rtw_en_tdls = 1;
|
module_param(rtw_en_tdls, int, 0644);
|
#endif
|
|
#ifdef CONFIG_FW_OFFLOAD_PARAM_INIT
|
int rtw_fw_param_init = 1;
|
module_param(rtw_fw_param_init, int, 0644);
|
#endif
|
|
#ifdef CONFIG_TDMADIG
|
int rtw_tdmadig_en = 1;
|
/*
|
1:MODE_PERFORMANCE
|
2:MODE_COVERAGE
|
*/
|
int rtw_tdmadig_mode = 1;
|
int rtw_dynamic_tdmadig = 0;
|
module_param(rtw_tdmadig_en, int, 0644);
|
module_param(rtw_tdmadig_mode, int, 0644);
|
module_param(rtw_dynamic_tdmadig, int, 0644);
|
#endif/*CONFIG_TDMADIG*/
|
|
/*dynamic RRSR default enable*/
|
int rtw_en_dyn_rrsr = 1;
|
int rtw_rrsr_value = 0xFFFFFFFF;
|
module_param(rtw_en_dyn_rrsr, int, 0644);
|
module_param(rtw_rrsr_value, int, 0644);
|
|
#ifdef CONFIG_WOWLAN
|
/*
|
* 0: disable, 1: enable
|
*/
|
uint rtw_wow_enable = 1;
|
module_param(rtw_wow_enable, uint, 0644);
|
/*
|
* bit[0]: magic packet wake up
|
* bit[1]: unucast packet(HW/FW unuicast)
|
* bit[2]: deauth wake up
|
*/
|
uint rtw_wakeup_event = RTW_WAKEUP_EVENT;
|
module_param(rtw_wakeup_event, uint, 0644);
|
/*
|
* 0: common WOWLAN
|
* bit[0]: disable BB RF
|
* bit[1]: For wireless remote controller with or without connection
|
*/
|
uint rtw_suspend_type = RTW_SUSPEND_TYPE;
|
module_param(rtw_suspend_type, uint, 0644);
|
#endif
|
|
#if defined(ROKU_PRIVATE) && defined(CONFIG_P2P)
|
int rtw_go_hidden_ssid_mode = ALL_HIDE_SSID;
|
module_param(rtw_go_hidden_ssid_mode, int, 0644);
|
#endif
|
|
#ifdef RTW_BUSY_DENY_SCAN
|
uint rtw_scan_interval_thr = BUSY_TRAFFIC_SCAN_DENY_PERIOD;
|
module_param(rtw_scan_interval_thr, uint, 0644);
|
MODULE_PARM_DESC(rtw_scan_interval_thr, "Threshold used to judge if scan " \
|
"request comes from scan UI, unit is ms.");
|
#endif /* RTW_BUSY_DENY_SCAN */
|
|
#ifdef CONFIG_HW_HDR_CONVERSION
|
int rtw_hw_hdr_conv = true;
|
#else
|
int rtw_hw_hdr_conv = false;
|
#endif
|
|
#ifdef CONFIG_MCC_MODE
|
int rtw_mcc_en = _TRUE;
|
module_param(rtw_mcc_en, int, 0644);
|
#endif
|
|
#ifdef CONFIG_RTW_MULTI_AP
|
static int rtw_unassoc_sta_mode_of_stype[UNASOC_STA_SRC_NUM] = CONFIG_RTW_UNASOC_STA_MODE_OF_STYPE;
|
static int rtw_unassoc_sta_mode_of_stype_num = 0;
|
module_param_array(rtw_unassoc_sta_mode_of_stype, int, &rtw_unassoc_sta_mode_of_stype_num, 0644);
|
|
uint rtw_max_unassoc_sta_cnt = 0;
|
module_param(rtw_max_unassoc_sta_cnt, uint, 0644);
|
#endif
|
|
#ifdef CONFIG_IOCTL_CFG80211
|
uint rtw_roch_min_home_dur = 1500;
|
uint rtw_roch_max_away_dur = 500;
|
uint rtw_roch_extend_dur = 500;
|
module_param(rtw_roch_min_home_dur, uint, 0644);
|
module_param(rtw_roch_max_away_dur, uint, 0644);
|
module_param(rtw_roch_extend_dur, uint, 0644);
|
#endif
|
|
static void rtw_regsty_load_target_tx_power(struct registry_priv *regsty)
|
{
|
int path, rs;
|
int *target_tx_pwr;
|
|
for (path = RF_PATH_A; path < RF_PATH_MAX; path++) {
|
if (path == RF_PATH_A)
|
target_tx_pwr = rtw_target_tx_pwr_2g_a;
|
else if (path == RF_PATH_B)
|
target_tx_pwr = rtw_target_tx_pwr_2g_b;
|
else if (path == RF_PATH_C)
|
target_tx_pwr = rtw_target_tx_pwr_2g_c;
|
else if (path == RF_PATH_D)
|
target_tx_pwr = rtw_target_tx_pwr_2g_d;
|
|
for (rs = CCK; rs < RATE_SECTION_NUM; rs++)
|
regsty->target_tx_pwr_2g[path][rs] = target_tx_pwr[rs];
|
}
|
|
#if CONFIG_IEEE80211_BAND_5GHZ
|
for (path = RF_PATH_A; path < RF_PATH_MAX; path++) {
|
if (path == RF_PATH_A)
|
target_tx_pwr = rtw_target_tx_pwr_5g_a;
|
else if (path == RF_PATH_B)
|
target_tx_pwr = rtw_target_tx_pwr_5g_b;
|
else if (path == RF_PATH_C)
|
target_tx_pwr = rtw_target_tx_pwr_5g_c;
|
else if (path == RF_PATH_D)
|
target_tx_pwr = rtw_target_tx_pwr_5g_d;
|
|
for (rs = OFDM; rs < RATE_SECTION_NUM; rs++)
|
regsty->target_tx_pwr_5g[path][rs - 1] = target_tx_pwr[rs - 1];
|
}
|
#endif /* CONFIG_IEEE80211_BAND_5GHZ */
|
}
|
|
static inline void rtw_regsty_load_chplan(struct registry_priv *regsty)
|
{
|
u16 chplan = RTW_CHPLAN_UNSPECIFIED;
|
u16 chplan_6g = RTW_CHPLAN_6G_UNSPECIFIED;
|
|
chplan = rtw_channel_plan;
|
#if CONFIG_IEEE80211_BAND_6GHZ
|
chplan_6g = rtw_channel_plan_6g;
|
#endif
|
|
rtw_chplan_ioctl_input_mapping(&chplan, &chplan_6g);
|
|
regsty->channel_plan = chplan;
|
#if CONFIG_IEEE80211_BAND_6GHZ
|
regsty->channel_plan_6g = chplan_6g;
|
#endif
|
}
|
|
static inline void rtw_regsty_load_alpha2(struct registry_priv *regsty)
|
{
|
if (strlen(rtw_country_code) != 2
|
|| (!IS_ALPHA2_WORLDWIDE(rtw_country_code)
|
&& (is_alpha(rtw_country_code[0]) == _FALSE
|
|| is_alpha(rtw_country_code[1]) == _FALSE)
|
)
|
) {
|
if (rtw_country_code != rtw_country_unspecified)
|
RTW_ERR("%s discard rtw_country_code not in alpha2 or \"%s\"\n", __func__, WORLDWIDE_ALPHA2);
|
SET_UNSPEC_ALPHA2(regsty->alpha2);
|
} else
|
_rtw_memcpy(regsty->alpha2, rtw_country_code, 2);
|
}
|
|
static inline void rtw_regsty_load_excl_chs(struct registry_priv *regsty)
|
{
|
int i;
|
int ch_num = 0;
|
|
for (i = 0; i < MAX_CHANNEL_NUM_2G_5G; i++)
|
if (((u8)rtw_excl_chs[i]) != 0)
|
regsty->excl_chs[ch_num++] = (u8)rtw_excl_chs[i];
|
|
if (ch_num < MAX_CHANNEL_NUM_2G_5G)
|
regsty->excl_chs[ch_num] = 0;
|
|
#if CONFIG_IEEE80211_BAND_6GHZ
|
ch_num = 0;
|
for (i = 0; i < MAX_CHANNEL_NUM_6G; i++)
|
if (((u8)rtw_excl_chs_6g[i]) != 0)
|
regsty->excl_chs_6g[ch_num++] = (u8)rtw_excl_chs_6g[i];
|
|
if (ch_num < MAX_CHANNEL_NUM_6G)
|
regsty->excl_chs_6g[ch_num] = 0;
|
#endif
|
}
|
|
#ifdef CONFIG_80211D
|
inline void rtw_regsty_load_country_ie_slave_settings(struct registry_priv *regsty)
|
{
|
regsty->country_ie_slave_en_role = rtw_country_ie_slave_en_role;
|
regsty->country_ie_slave_en_ifbmp = rtw_country_ie_slave_en_ifbmp;
|
}
|
#endif
|
|
#ifdef CONFIG_80211N_HT
|
static inline void rtw_regsty_init_rx_ampdu_sz_limit(struct registry_priv *regsty)
|
{
|
int i, j;
|
uint *sz_limit;
|
|
for (i = 0; i < 4; i++) {
|
if (i == 0)
|
sz_limit = rtw_rx_ampdu_sz_limit_1ss;
|
else if (i == 1)
|
sz_limit = rtw_rx_ampdu_sz_limit_2ss;
|
else if (i == 2)
|
sz_limit = rtw_rx_ampdu_sz_limit_3ss;
|
else if (i == 3)
|
sz_limit = rtw_rx_ampdu_sz_limit_4ss;
|
|
for (j = 0; j < 4; j++)
|
regsty->rx_ampdu_sz_limit_by_nss_bw[i][j] = sz_limit[j];
|
}
|
}
|
#endif /* CONFIG_80211N_HT */
|
|
#ifdef CONFIG_RTW_MULTI_AP
|
inline void rtw_regsty_init_unassoc_sta_param(struct registry_priv *regsty)
|
{
|
int i;
|
|
for (i = 0; i < UNASOC_STA_SRC_NUM; i++)
|
regsty->unassoc_sta_mode_of_stype[i] = rtw_unassoc_sta_mode_of_stype[i];
|
|
regsty->max_unassoc_sta_cnt = (u16)rtw_max_unassoc_sta_cnt;
|
}
|
#endif
|
|
static void rtw_load_phy_file_path (struct dvobj_priv *dvobj)
|
{
|
struct rtw_phl_com_t *phl_com = GET_PHL_COM(dvobj);
|
|
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
|
if (rtw_load_phy_file & LOAD_BB_PHY_REG_FILE) {
|
phl_com->phy_sw_cap[0].bb_phy_reg_info.para_src = RTW_PARA_SRC_EXTNAL;
|
phl_com->phy_sw_cap[1].bb_phy_reg_info.para_src = RTW_PARA_SRC_EXTNAL;
|
}
|
|
if (rtw_load_phy_file & LOAD_RF_RADIO_FILE) {
|
phl_com->phy_sw_cap[0].rf_radio_a_info.para_src = RTW_PARA_SRC_EXTNAL;
|
phl_com->phy_sw_cap[1].rf_radio_a_info.para_src = RTW_PARA_SRC_EXTNAL;
|
phl_com->phy_sw_cap[0].rf_radio_b_info.para_src = RTW_PARA_SRC_EXTNAL;
|
phl_com->phy_sw_cap[1].rf_radio_b_info.para_src = RTW_PARA_SRC_EXTNAL;
|
}
|
|
if (rtw_load_phy_file & LOAD_RF_TXPWR_BY_RATE) {
|
phl_com->phy_sw_cap[0].rf_txpwr_byrate_info.para_src = RTW_PARA_SRC_EXTNAL;
|
phl_com->phy_sw_cap[1].rf_txpwr_byrate_info.para_src = RTW_PARA_SRC_EXTNAL;
|
}
|
|
if (rtw_load_phy_file & LOAD_RF_TXPWR_TRACK_FILE) {
|
phl_com->phy_sw_cap[0].rf_txpwrtrack_info.para_src = RTW_PARA_SRC_EXTNAL;
|
phl_com->phy_sw_cap[1].rf_txpwrtrack_info.para_src = RTW_PARA_SRC_EXTNAL;
|
}
|
|
if (rtw_load_phy_file & LOAD_RF_TXPWR_LMT_FILE) {
|
phl_com->phy_sw_cap[0].rf_txpwrlmt_info.para_src = RTW_PARA_SRC_EXTNAL;
|
phl_com->phy_sw_cap[1].rf_txpwrlmt_info.para_src = RTW_PARA_SRC_EXTNAL;
|
}
|
|
if (rtw_load_phy_file & LOAD_RF_TXPWR_LMT_RU_FILE) {
|
phl_com->phy_sw_cap[0].rf_txpwrlmt_ru_info.para_src = RTW_PARA_SRC_EXTNAL;
|
phl_com->phy_sw_cap[1].rf_txpwrlmt_ru_info.para_src = RTW_PARA_SRC_EXTNAL;
|
}
|
#endif/* CONFIG_LOAD_PHY_PARA_FROM_FILE */
|
}
|
|
void rtw_core_update_default_setting (struct dvobj_priv *dvobj)
|
{
|
struct rtw_phl_com_t *phl_com = GET_PHL_COM(dvobj);
|
|
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
|
rtw_load_phy_file_path(dvobj);
|
#endif /* CONFIG_LOAD_PHY_PARA_FROM_FILE */
|
|
phl_com->dev_sw_cap.fw_cap.dlram_en = true;
|
phl_com->dev_sw_cap.fw_cap.dlrom_en = false;
|
#ifdef CONFIG_FILE_FWIMG
|
phl_com->dev_sw_cap.fw_cap.fw_src = RTW_FW_SRC_EXTNAL;
|
#else /* !CONFIG_FILE_FWIMG */
|
phl_com->dev_sw_cap.fw_cap.fw_src = RTW_FW_SRC_INTNAL;
|
#endif /* !CONFIG_FILE_FWIMG */
|
|
phl_com->phy_sw_cap[0].proto_sup = rtw_wireless_mode;
|
phl_com->phy_sw_cap[0].band_sup = rtw_band_type;
|
phl_com->phy_sw_cap[0].bw_sup = BW_CAP_80M | BW_CAP_40M | BW_CAP_20M; //rtw_bw_mode;
|
phl_com->phy_sw_cap[0].txss = rtw_tx_nss;
|
phl_com->phy_sw_cap[0].rxss = rtw_rx_nss;
|
|
phl_com->phy_sw_cap[1].proto_sup = rtw_wireless_mode;
|
phl_com->phy_sw_cap[1].band_sup = rtw_band_type;
|
phl_com->phy_sw_cap[1].bw_sup = rtw_bw_mode;
|
phl_com->phy_sw_cap[1].txss = rtw_tx_nss;
|
phl_com->phy_sw_cap[1].rxss = rtw_rx_nss;
|
|
phl_com->phy_sw_cap[0].hw_rts_time_th = 88;
|
phl_com->phy_sw_cap[0].hw_rts_len_th = 4080;
|
phl_com->phy_sw_cap[1].hw_rts_time_th = 88;
|
phl_com->phy_sw_cap[1].hw_rts_len_th = 4080;
|
|
/*phl_com->dev_sw_cap.pkg_type = rtw_pkg_type;*/
|
phl_com->dev_sw_cap.rfe_type = rtw_rfe_type;
|
#ifdef DBG_LA_MODE
|
phl_com->dev_sw_cap.la_mode = rtw_la_mode_en;
|
#endif
|
#ifdef CONFIG_DBCC_SUPPORT
|
phl_com->dev_sw_cap.dbcc_sup = rtw_dbcc_en;
|
#endif
|
|
phl_com->dev_sw_cap.hw_hdr_conv = rtw_hw_hdr_conv;
|
|
phl_com->proto_sw_cap[0].max_amsdu_len = rtw_max_amsdu_len;
|
phl_com->proto_sw_cap[1].max_amsdu_len = rtw_max_amsdu_len;
|
|
#if defined(CONFIG_PCI_HCI)
|
#if !defined(CONFIG_PCI_ASPM)
|
/* Disable all PCIE Backdoor to avoid PCIE IOT */
|
phl_com->bus_sw_cap.l0s_ctrl = RTW_PCIE_BUS_FUNC_DISABLE;
|
phl_com->bus_sw_cap.l1_ctrl = RTW_PCIE_BUS_FUNC_DISABLE;
|
phl_com->bus_sw_cap.l1ss_ctrl = RTW_PCIE_BUS_FUNC_DISABLE;
|
phl_com->bus_sw_cap.wake_ctrl = RTW_PCIE_BUS_FUNC_DEFAULT;
|
phl_com->bus_sw_cap.crq_ctrl = RTW_PCIE_BUS_FUNC_DISABLE;
|
#endif
|
phl_com->bus_sw_cap.txbd_num = 256;
|
phl_com->bus_sw_cap.rxbd_num = 256;
|
phl_com->bus_sw_cap.rpbd_num = 0; /* by default */
|
#ifdef CONFIG_RXBUF_NUM_1024
|
phl_com->bus_sw_cap.rxbuf_num = 1024;
|
#else
|
phl_com->bus_sw_cap.rxbuf_num = 512;
|
#endif
|
phl_com->bus_sw_cap.rpbuf_num = 0; /* by default */
|
#endif /*CONFIG_PCI_HCI*/
|
|
#ifdef CONFIG_BTC
|
phl_com->dev_sw_cap.btc_mode = BTC_MODE_NORMAL;
|
#else
|
phl_com->dev_sw_cap.btc_mode = BTC_MODE_WL;
|
#endif
|
#ifdef CONFIG_MCC_MODE
|
phl_com->dev_sw_cap.mcc_sup = rtw_mcc_en;
|
#endif
|
#ifdef CONFIG_USB_HCI
|
phl_com->bus_sw_cap.tx_buf_size = MAX_XMITBUF_SZ;
|
phl_com->bus_sw_cap.tx_buf_num = NR_XMITBUFF;
|
phl_com->bus_sw_cap.tx_mgnt_buf_size = MAX_MGNT_XMITBUF_SZ;
|
phl_com->bus_sw_cap.tx_mgnt_buf_num = NR_MGNT_XMITBUFF;
|
phl_com->bus_sw_cap.rx_buf_size = MAX_RECVBUF_SZ;
|
phl_com->bus_sw_cap.rx_buf_num = NR_RECVBUFF;
|
phl_com->bus_sw_cap.in_token_num = NR_RECV_URB;
|
#endif
|
#ifdef CONFIG_SDIO_HCI
|
#ifdef MAX_XMITBUF_SZ
|
phl_com->bus_sw_cap.tx_buf_size = MAX_XMITBUF_SZ;
|
#endif
|
#ifdef NR_XMITBUFF
|
phl_com->bus_sw_cap.tx_buf_num = NR_XMITBUFF;
|
#endif
|
#ifdef MAX_MGNT_XMITBUF_SZ
|
phl_com->bus_sw_cap.tx_mgnt_buf_size = MAX_MGNT_XMITBUF_SZ;
|
#endif
|
#ifdef NR_MGNT_XMITBUFF
|
phl_com->bus_sw_cap.tx_mgnt_buf_num = NR_MGNT_XMITBUFF;
|
#endif
|
#ifdef MAX_RECVBUF_SZ
|
phl_com->bus_sw_cap.rx_buf_size = MAX_RECVBUF_SZ;
|
#endif
|
#ifdef NR_RECVBUFF
|
phl_com->bus_sw_cap.rx_buf_num = NR_RECVBUFF;
|
#endif
|
#endif /* CONFIG_SDIO_HCI */
|
|
/* Set STBC Tx/Rx sw role cap */
|
phl_com->role_sw_cap.stbc_cap = 0;
|
phl_com->role_sw_cap.stbc_cap |=
|
(rtw_stbc_cap & BIT5) ? HW_CAP_STBC_HT_TX : 0;
|
phl_com->role_sw_cap.stbc_cap |=
|
(rtw_stbc_cap & BIT1) ? HW_CAP_STBC_VHT_TX : 0;
|
phl_com->role_sw_cap.stbc_cap |=
|
(rtw_stbc_cap & BIT10) ? HW_CAP_STBC_HE_TX : 0;
|
phl_com->role_sw_cap.stbc_cap |=
|
(rtw_stbc_cap & BIT11) ? HW_CAP_STBC_HE_TX_GT_80M : 0;
|
|
phl_com->role_sw_cap.stbc_cap |=
|
(rtw_stbc_cap & BIT4) ? HW_CAP_STBC_HT_RX : 0;
|
phl_com->role_sw_cap.stbc_cap |=
|
(rtw_stbc_cap & BIT0) ? HW_CAP_STBC_VHT_RX : 0;
|
phl_com->role_sw_cap.stbc_cap |=
|
(rtw_stbc_cap & BIT8) ? HW_CAP_STBC_HE_RX : 0;
|
phl_com->role_sw_cap.stbc_cap |=
|
(rtw_stbc_cap & BIT9) ? HW_CAP_STBC_HE_RX_GT_80M : 0;
|
|
/*Band0*/
|
phl_com->proto_sw_cap[0].stbc_ht_tx = (rtw_stbc_cap & BIT5) ? 1 : 0;
|
phl_com->proto_sw_cap[0].stbc_vht_tx = (rtw_stbc_cap & BIT1) ? 1 : 0;
|
phl_com->proto_sw_cap[0].stbc_he_tx = (rtw_stbc_cap & BIT10) ? 1 : 0;
|
phl_com->proto_sw_cap[0].stbc_tx_greater_80mhz = (rtw_stbc_cap & BIT11) ? 1 : 0;
|
|
phl_com->proto_sw_cap[0].stbc_ht_rx = (rtw_stbc_cap & BIT4) ? 1 : 0;
|
phl_com->proto_sw_cap[0].stbc_vht_rx = (rtw_stbc_cap & BIT0) ? 1 : 0;
|
phl_com->proto_sw_cap[0].stbc_he_rx = (rtw_stbc_cap & BIT8) ? 1 : 0;
|
phl_com->proto_sw_cap[0].stbc_rx_greater_80mhz = (rtw_stbc_cap & BIT9) ? 1 : 0;
|
|
/*Band1*/
|
phl_com->proto_sw_cap[1].stbc_ht_tx = (rtw_stbc_cap & BIT5) ? 1 : 0;
|
phl_com->proto_sw_cap[1].stbc_vht_tx = (rtw_stbc_cap & BIT1) ? 1 : 0;
|
phl_com->proto_sw_cap[1].stbc_he_tx = (rtw_stbc_cap & BIT10) ? 1 : 0;
|
phl_com->proto_sw_cap[1].stbc_tx_greater_80mhz = (rtw_stbc_cap & BIT11) ? 1 : 0;
|
|
phl_com->proto_sw_cap[1].stbc_ht_rx = (rtw_stbc_cap & BIT4) ? 1 : 0;
|
phl_com->proto_sw_cap[1].stbc_vht_rx = (rtw_stbc_cap & BIT0) ? 1 : 0;
|
phl_com->proto_sw_cap[1].stbc_he_rx = (rtw_stbc_cap & BIT8) ? 1 : 0;
|
phl_com->proto_sw_cap[1].stbc_rx_greater_80mhz = (rtw_stbc_cap & BIT9) ? 1 : 0;
|
|
#ifdef CONFIG_BEAMFORMING
|
phl_com->role_sw_cap.bf_cap = 0;
|
phl_com->role_sw_cap.bf_cap |= (rtw_beamform_cap & BIT0) ? HW_CAP_BFER_VHT_SU : 0;
|
phl_com->role_sw_cap.bf_cap |= (rtw_beamform_cap & BIT1) ? HW_CAP_BFEE_VHT_SU: 0;
|
phl_com->role_sw_cap.bf_cap |= (rtw_beamform_cap & BIT2) ? HW_CAP_BFER_VHT_MU: 0;
|
phl_com->role_sw_cap.bf_cap |= (rtw_beamform_cap & BIT3) ? HW_CAP_BFEE_VHT_MU: 0;
|
phl_com->role_sw_cap.bf_cap |= (rtw_beamform_cap & BIT4) ? HW_CAP_BFER_HT_SU: 0;
|
phl_com->role_sw_cap.bf_cap |= (rtw_beamform_cap & BIT5) ? HW_CAP_BFEE_HT_SU: 0;
|
phl_com->role_sw_cap.bf_cap |= (rtw_beamform_cap & BIT6) ? HW_CAP_BFER_HE_SU: 0;
|
phl_com->role_sw_cap.bf_cap |= (rtw_beamform_cap & BIT7) ? HW_CAP_BFEE_HE_SU: 0;
|
phl_com->role_sw_cap.bf_cap |= (rtw_beamform_cap & BIT8) ? HW_CAP_BFER_HE_MU: 0;
|
phl_com->role_sw_cap.bf_cap |= (rtw_beamform_cap & BIT9) ? HW_CAP_BFEE_HE_MU: 0;
|
|
/*Band0*/
|
phl_com->proto_sw_cap[0].vht_su_bfmr = (rtw_sw_proto_bf_cap_phy0 & BIT0) ? 1 : 0;
|
phl_com->proto_sw_cap[0].vht_su_bfme = (rtw_sw_proto_bf_cap_phy0 & BIT1) ? 1 : 0;
|
phl_com->proto_sw_cap[0].vht_mu_bfmr = (rtw_sw_proto_bf_cap_phy0 & BIT2) ? 1 : 0;
|
phl_com->proto_sw_cap[0].vht_mu_bfme = (rtw_sw_proto_bf_cap_phy0 & BIT3) ? 1 : 0;
|
phl_com->proto_sw_cap[0].ht_su_bfmr = (rtw_sw_proto_bf_cap_phy0 & BIT4) ? 1 : 0;
|
phl_com->proto_sw_cap[0].ht_su_bfme = (rtw_sw_proto_bf_cap_phy0 & BIT5) ? 1 : 0;
|
phl_com->proto_sw_cap[0].he_su_bfmr = (rtw_sw_proto_bf_cap_phy0 & BIT6) ? 1 : 0;
|
phl_com->proto_sw_cap[0].he_su_bfme = (rtw_sw_proto_bf_cap_phy0 & BIT7) ? 1 : 0;
|
phl_com->proto_sw_cap[0].he_mu_bfmr = (rtw_sw_proto_bf_cap_phy0 & BIT8) ? 1 : 0;
|
phl_com->proto_sw_cap[0].he_mu_bfme = (rtw_sw_proto_bf_cap_phy0 & BIT9) ? 1 : 0;
|
|
/*Band1*/
|
phl_com->proto_sw_cap[1].vht_su_bfmr = (rtw_sw_proto_bf_cap_phy1 & BIT0) ? 1 : 0;
|
phl_com->proto_sw_cap[1].vht_su_bfme = (rtw_sw_proto_bf_cap_phy1 & BIT1) ? 1 : 0;
|
phl_com->proto_sw_cap[1].vht_mu_bfmr = (rtw_sw_proto_bf_cap_phy1 & BIT2) ? 1 : 0;
|
phl_com->proto_sw_cap[1].vht_mu_bfme = (rtw_sw_proto_bf_cap_phy1 & BIT3) ? 1 : 0;
|
phl_com->proto_sw_cap[1].ht_su_bfmr = (rtw_sw_proto_bf_cap_phy1 & BIT4) ? 1 : 0;
|
phl_com->proto_sw_cap[1].ht_su_bfme = (rtw_sw_proto_bf_cap_phy1 & BIT5) ? 1 : 0;
|
phl_com->proto_sw_cap[1].he_su_bfmr = (rtw_sw_proto_bf_cap_phy1 & BIT6) ? 1 : 0;
|
phl_com->proto_sw_cap[1].he_su_bfme = (rtw_sw_proto_bf_cap_phy1 & BIT7) ? 1 : 0;
|
phl_com->proto_sw_cap[1].he_mu_bfmr = (rtw_sw_proto_bf_cap_phy1 & BIT8) ? 1 : 0;
|
phl_com->proto_sw_cap[1].he_mu_bfme = (rtw_sw_proto_bf_cap_phy1 & BIT9) ? 1 : 0;
|
#endif
|
|
#if CONFIG_TXPWR_LIMIT
|
if (rtw_tx_pwr_lmt_enable == 2)
|
phl_com->dev_sw_cap.pwrlmt_type = RTW_PWLMT_BY_EFUSE;
|
else if (rtw_tx_pwr_lmt_enable == 1)
|
phl_com->dev_sw_cap.pwrlmt_type = RTW_PWBYRATE_AND_PWLMT;
|
else if (rtw_tx_pwr_lmt_enable == 0)
|
phl_com->dev_sw_cap.pwrlmt_type = RTW_PWLMT_DISABLE;
|
#else
|
phl_com->dev_sw_cap.pwrlmt_type = RTW_PWLMT_DISABLE;
|
#endif
|
|
if (rtw_tx_pwr_by_rate == 1)
|
phl_com->dev_sw_cap.pwrbyrate_off = RTW_PW_BY_RATE_ON;
|
else if (rtw_tx_pwr_by_rate == 0)
|
phl_com->dev_sw_cap.pwrbyrate_off = RTW_PW_BY_RATE_ALL_SAME;
|
else
|
phl_com->dev_sw_cap.pwrbyrate_off = RTW_PW_BY_RATE_ON;
|
|
/* If rf_board_opt is not assigned to specific value, it must be set to 0xFF as default. */
|
phl_com->dev_sw_cap.rf_board_opt = 0xFF;
|
|
#ifdef CONFIG_RTW_IPS
|
phl_com->dev_sw_cap.ps_cap.ips_en = rtw_ips_mode;
|
#endif
|
#ifdef CONFIG_RTW_LPS
|
phl_com->dev_sw_cap.ps_cap.lps_en = rtw_lps_mode;
|
phl_com->dev_sw_cap.ps_cap.lps_cap = rtw_lps_cap;
|
#endif
|
|
#ifdef CONFIG_RTW_LED
|
rtw_phl_led_set_ctrl_mode(GET_PHL_INFO(dvobj), 0, RTW_LED_CTRL_HW_TX_MODE);
|
#endif
|
|
#if defined (CONFIG_RPQ_AGG_NUM) && (CONFIG_RPQ_AGG_NUM > 0)
|
phl_com->dev_sw_cap.rpq_agg_num = CONFIG_RPQ_AGG_NUM;
|
#else
|
phl_com->dev_sw_cap.rpq_agg_num = 0; /* MAC default num: 121 for all IC */
|
#endif
|
}
|
|
u8 rtw_load_dvobj_registry(struct dvobj_priv *dvobj)
|
{
|
/*struct rtw_phl_com_t *phl_com = GET_PHL_COM(dvobj);*/
|
#ifdef CONFIG_CONCURRENT_MODE
|
dvobj->virtual_iface_num = (u8)rtw_virtual_iface_num;
|
#endif
|
return _SUCCESS;
|
}
|
uint rtw_load_registry(_adapter *padapter)
|
{
|
uint status = _SUCCESS;
|
struct registry_priv *registry_par = &padapter->registrypriv;
|
|
|
#ifdef CONFIG_RTW_DEBUG
|
if (rtw_drv_log_level >= _DRV_MAX_)
|
rtw_drv_log_level = _DRV_DEBUG_;
|
#endif
|
|
registry_par->chip_version = (u8)rtw_chip_version;
|
registry_par->rfintfs = (u8)rtw_rfintfs;
|
registry_par->lbkmode = (u8)rtw_lbkmode;
|
/* registry_par->hci = (u8)hci; */
|
registry_par->network_mode = (u8)rtw_network_mode;
|
|
_rtw_memcpy(registry_par->ssid.Ssid, "ANY", 3);
|
registry_par->ssid.SsidLength = 3;
|
|
registry_par->channel = (u8)rtw_channel;
|
#ifdef CONFIG_NARROWBAND_SUPPORTING
|
if (rtw_nb_config != RTW_NB_CONFIG_NONE)
|
rtw_wireless_mode &= ~WIRELESS_11B;
|
#endif
|
registry_par->wireless_mode = (u8)rtw_wireless_mode;
|
registry_par->band_type = (u8)rtw_band_type;
|
|
if (is_supported_24g(registry_par->band_type) && (!is_supported_5g(registry_par->band_type))
|
&& (registry_par->channel > 14))
|
registry_par->channel = 1;
|
else if (is_supported_5g(registry_par->band_type) && (!is_supported_24g(registry_par->band_type))
|
&& (registry_par->channel <= 14))
|
registry_par->channel = 36;
|
|
registry_par->vrtl_carrier_sense = (u8)rtw_vrtl_carrier_sense ;
|
registry_par->vcs_type = (u8)rtw_vcs_type;
|
registry_par->rts_thresh = (u16)rtw_rts_thresh;
|
registry_par->hw_rts_en = (u8)rtw_hw_rts_en;
|
registry_par->frag_thresh = (u16)rtw_frag_thresh;
|
registry_par->preamble = (u8)rtw_preamble;
|
registry_par->scan_mode = (u8)rtw_scan_mode;
|
registry_par->smart_ps = (u8)rtw_smart_ps;
|
registry_par->check_fw_ps = (u8)rtw_check_fw_ps;
|
#ifdef CONFIG_TDMADIG
|
registry_par->tdmadig_en = (u8)rtw_tdmadig_en;
|
registry_par->tdmadig_mode = (u8)rtw_tdmadig_mode;
|
registry_par->tdmadig_dynamic = (u8) rtw_dynamic_tdmadig;
|
registry_par->power_mgnt = PM_PS_MODE_ACTIVE;
|
registry_par->ips_mode = IPS_NONE;
|
#else
|
registry_par->power_mgnt = (u8)rtw_power_mgnt;
|
registry_par->ips_mode = (u8)rtw_ips_mode;
|
#endif/*CONFIG_TDMADIG*/
|
registry_par->lps_level = (u8)rtw_lps_level;
|
registry_par->en_dyn_rrsr = (u8)rtw_en_dyn_rrsr;
|
registry_par->set_rrsr_value = (u32)rtw_rrsr_value;
|
#ifdef CONFIG_LPS_1T1R
|
registry_par->lps_1t1r = (u8)(rtw_lps_1t1r ? 1 : 0);
|
#endif
|
registry_par->lps_chk_by_tp = (u8)rtw_lps_chk_by_tp;
|
#ifdef CONFIG_WOWLAN
|
registry_par->wow_power_mgnt = (u8)rtw_wow_power_mgnt;
|
registry_par->wow_lps_level = (u8)rtw_wow_lps_level;
|
#ifdef CONFIG_LPS_1T1R
|
registry_par->wow_lps_1t1r = (u8)(rtw_wow_lps_1t1r ? 1 : 0);
|
#endif
|
#endif /* CONFIG_WOWLAN */
|
registry_par->radio_enable = (u8)rtw_radio_enable;
|
registry_par->long_retry_lmt = (u8)rtw_long_retry_lmt;
|
registry_par->short_retry_lmt = (u8)rtw_short_retry_lmt;
|
registry_par->busy_thresh = (u16)rtw_busy_thresh;
|
registry_par->max_bss_cnt = (u16)rtw_max_bss_cnt;
|
/* registry_par->qos_enable = (u8)rtw_qos_enable; */
|
registry_par->ack_policy = (u8)rtw_ack_policy;
|
registry_par->mp_mode = (u8)rtw_mp_mode;
|
#if defined(CONFIG_MP_INCLUDED) && defined(CONFIG_RTW_CUSTOMER_STR)
|
registry_par->mp_customer_str = (u8)rtw_mp_customer_str;
|
#endif
|
registry_par->software_encrypt = (u8)rtw_software_encrypt;
|
registry_par->software_decrypt = (u8)rtw_software_decrypt;
|
|
registry_par->acm_method = (u8)rtw_acm_method;
|
registry_par->usb_rxagg_mode = (u8)rtw_usb_rxagg_mode;
|
registry_par->dynamic_agg_enable = (u8)rtw_dynamic_agg_enable;
|
|
/* WMM */
|
registry_par->wmm_enable = (u8)rtw_wmm_enable;
|
|
#ifdef CONFIG_WMMPS_STA
|
/* UAPSD */
|
registry_par->uapsd_max_sp_len= (u8)rtw_uapsd_max_sp;
|
registry_par->uapsd_ac_enable = (u8)rtw_uapsd_ac_enable;
|
registry_par->wmm_smart_ps = (u8)rtw_wmm_smart_ps;
|
#endif /* CONFIG_WMMPS_STA */
|
|
registry_par->RegPwrTrimEnable = (u8)rtw_pwrtrim_enable;
|
|
registry_par->tx_bw_mode = (u8)rtw_tx_bw_mode;
|
|
#ifdef CONFIG_80211N_HT
|
registry_par->ht_enable = (u8)rtw_ht_enable;
|
if (registry_par->ht_enable && is_supported_ht(registry_par->wireless_mode)) {
|
#ifdef CONFIG_NARROWBAND_SUPPORTING
|
if (rtw_nb_config != RTW_NB_CONFIG_NONE)
|
rtw_bw_mode = 0;
|
#endif
|
registry_par->bw_mode = (u8)rtw_bw_mode;
|
registry_par->ampdu_enable = (u8)rtw_ampdu_enable;
|
registry_par->rx_ampdu_amsdu = (u8)rtw_rx_ampdu_amsdu;
|
#ifdef CONFIG_DISBALE_RX_AMSDU_FOR_BUS_LOW_SPEED
|
#ifdef CONFIG_USB_HCI
|
if (dvobj_to_usb(adapter_to_dvobj(padapter))->usb_speed < RTW_USB_SPEED_SUPER)
|
registry_par->rx_ampdu_amsdu = 0;
|
#endif
|
#endif
|
registry_par->tx_ampdu_amsdu = (u8)rtw_tx_ampdu_amsdu;
|
registry_par->tx_quick_addba_req = (u8)rtw_quick_addba_req;
|
registry_par->short_gi = (u8)rtw_short_gi;
|
registry_par->ldpc_cap = (u8)rtw_ldpc_cap;
|
|
#ifdef CONFIG_RTW_TX_NPATH_EN
|
registry_par->tx_npath = (u8)rtw_tx_npath_enable;
|
#endif
|
#ifdef CONFIG_RTW_PATH_DIV
|
registry_par->path_div = (u8)rtw_path_div_enable;
|
#endif
|
registry_par->stbc_cap = (u16)rtw_stbc_cap;
|
#ifdef CONFIG_BEAMFORMING
|
registry_par->beamform_cap = (u8)rtw_beamform_cap;
|
registry_par->dyn_txbf = (u8)rtw_dyn_txbf;
|
registry_par->beamformer_rf_num = (u8)rtw_bfer_rf_number;
|
registry_par->beamformee_rf_num = (u8)rtw_bfee_rf_number;
|
#endif
|
rtw_regsty_init_rx_ampdu_sz_limit(registry_par);
|
}
|
#endif
|
|
#if 0
|
int rtw_short_gi = 0xf;
|
/* BIT0: Enable VHT LDPC Rx, BIT1: Enable VHT LDPC Tx, BIT4: Enable HT LDPC Rx, BIT5: Enable HT LDPC Tx */
|
int rtw_ldpc_cap = 0x33;
|
/* BIT0: Enable VHT STBC Rx, BIT1: Enable VHT STBC Tx, BIT4: Enable HT STBC Rx, BIT5: Enable HT STBC Tx */
|
int rtw_stbc_cap = 0x13;
|
#endif
|
|
#ifdef DBG_LA_MODE
|
registry_par->la_mode_en = (u8)rtw_la_mode_en;
|
#endif
|
#ifdef CONFIG_NARROWBAND_SUPPORTING
|
registry_par->rtw_nb_config = (u8)rtw_nb_config;
|
#endif
|
|
#ifdef CONFIG_80211AC_VHT
|
registry_par->vht_enable = (u8)rtw_vht_enable;
|
registry_par->vht_24g_enable = (u8)rtw_vht_24g_enable;
|
registry_par->ampdu_factor = (u8)rtw_ampdu_factor;
|
registry_par->vht_rx_mcs_map[0] = (u8)(rtw_vht_rx_mcs_map & 0xFF);
|
registry_par->vht_rx_mcs_map[1] = (u8)((rtw_vht_rx_mcs_map & 0xFF00) >> 8);
|
#endif
|
|
#ifdef CONFIG_80211AX_HE
|
registry_par->he_enable = (u8)rtw_he_enable;
|
#endif
|
|
#ifdef CONFIG_TX_EARLY_MODE
|
registry_par->early_mode = (u8)rtw_early_mode;
|
#endif
|
registry_par->lowrate_two_xmit = (u8)rtw_lowrate_two_xmit;
|
registry_par->rf_path = (u8)rtw_rf_path; /*rf_config/rtw_rf_config*/
|
registry_par->tx_nss = (u8)rtw_tx_nss;
|
registry_par->rx_nss = (u8)rtw_rx_nss;
|
registry_par->low_power = (u8)rtw_low_power;
|
|
registry_par->check_hw_status = (u8)rtw_check_hw_status;
|
|
registry_par->wifi_spec = (u8)rtw_wifi_spec;
|
|
#ifdef CONFIG_REGD_SRC_FROM_OS
|
if (regd_src_is_valid(rtw_regd_src))
|
registry_par->regd_src = (u8)rtw_regd_src;
|
else {
|
RTW_WARN("%s invalid rtw_regd_src(%u), use REGD_SRC_RTK_PRIV instead\n", __func__, rtw_regd_src);
|
registry_par->regd_src = REGD_SRC_RTK_PRIV;
|
}
|
#endif
|
|
rtw_regsty_load_alpha2(registry_par);
|
rtw_regsty_load_chplan(registry_par);
|
rtw_regsty_load_excl_chs(registry_par);
|
#ifdef CONFIG_80211D
|
rtw_regsty_load_country_ie_slave_settings(registry_par);
|
#endif
|
|
registry_par->full_ch_in_p2p_handshake = (u8)rtw_full_ch_in_p2p_handshake;
|
#ifdef CONFIG_BTC
|
registry_par->btcoex = (u8)rtw_btcoex_enable;
|
registry_par->bt_iso = (u8)rtw_bt_iso;
|
registry_par->bt_sco = (u8)rtw_bt_sco;
|
registry_par->bt_ampdu = (u8)rtw_bt_ampdu;
|
registry_par->ant_num = (u8)rtw_ant_num;
|
registry_par->single_ant_path = (u8) rtw_single_ant_path;
|
#endif
|
|
registry_par->bAcceptAddbaReq = (u8)rtw_AcceptAddbaReq;
|
|
registry_par->antdiv_cfg = (u8)rtw_antdiv_cfg;
|
registry_par->antdiv_type = (u8)rtw_antdiv_type;
|
|
registry_par->drv_ant_band_switch = (u8) rtw_drv_ant_band_switch;
|
|
registry_par->switch_usb_mode = (u8)rtw_switch_usb_mode;
|
|
registry_par->hw_wps_pbc = (u8)rtw_hw_wps_pbc;
|
|
#ifdef CONFIG_ADAPTOR_INFO_CACHING_FILE
|
snprintf(registry_par->adaptor_info_caching_file_path, PATH_LENGTH_MAX, "%s", rtw_adaptor_info_caching_file_path);
|
registry_par->adaptor_info_caching_file_path[PATH_LENGTH_MAX - 1] = 0;
|
#endif
|
|
#ifdef CONFIG_LAYER2_ROAMING
|
registry_par->max_roaming_times = (u8)rtw_max_roaming_times;
|
#endif
|
|
snprintf(registry_par->ifname, 16, "%s", ifname);
|
snprintf(registry_par->if2name, 16, "%s", if2name);
|
|
#if defined(CONFIG_CONCURRENT_MODE) && !RTW_P2P_GROUP_INTERFACE
|
#ifdef CONFIG_P2P
|
if (CONFIG_RTW_STATIC_NDEV_NUM <= rtw_sel_p2p_iface) {
|
RTW_ERR("rtw_sel_p2p_iface out of range\n");
|
rtw_sel_p2p_iface = CONFIG_RTW_STATIC_NDEV_NUM - 1;
|
}
|
|
registry_par->sel_p2p_iface = (u8)rtw_sel_p2p_iface;
|
RTW_INFO("%s, Select P2P interface: iface_id:%d\n", __func__, registry_par->sel_p2p_iface);
|
#endif
|
#endif
|
|
#ifdef CONFIG_IGNORE_GO_AND_LOW_RSSI_IN_SCAN_LIST
|
registry_par->ignore_go_in_scan = (u8)rtw_ignore_go_in_scan;
|
registry_par->ignore_low_rssi_in_scan = rtw_ignore_low_rssi_in_scan;
|
#endif /*CONFIG_IGNORE_GO_AND_LOW_RSSI_IN_SCAN_LIST*/
|
registry_par->vo_edca = rtw_vo_edca;
|
|
registry_par->pll_ref_clk_sel = (u8)rtw_pll_ref_clk_sel;
|
|
rtw_regsty_load_target_tx_power(registry_par);
|
|
registry_par->TxBBSwing_2G = (s8)rtw_TxBBSwing_2G;
|
registry_par->TxBBSwing_5G = (s8)rtw_TxBBSwing_5G;
|
registry_par->bEn_RFE = 1;
|
registry_par->RFE_Type = (u8)rtw_rfe_type;
|
registry_par->PowerTracking_Type = (u8)rtw_powertracking_type;
|
registry_par->AmplifierType_2G = (u8)rtw_amplifier_type_2g;
|
registry_par->AmplifierType_5G = (u8)rtw_amplifier_type_5g;
|
registry_par->GLNA_Type = (u8)rtw_GLNA_type;
|
#ifdef CONFIG_LOAD_PHY_PARA_FROM_FILE
|
registry_par->load_phy_file = (u8)rtw_load_phy_file;
|
registry_par->RegDecryptCustomFile = (u8)rtw_decrypt_phy_file;
|
#endif
|
registry_par->qos_opt_enable = (u8)rtw_qos_opt_enable;
|
|
registry_par->hiq_filter = (u8)rtw_hiq_filter;
|
|
registry_par->adaptivity_en = (u8)rtw_adaptivity_en;
|
registry_par->adaptivity_mode = (u8)rtw_adaptivity_mode;
|
registry_par->adaptivity_th_l2h_ini = (s8)rtw_adaptivity_th_l2h_ini;
|
registry_par->adaptivity_th_edcca_hl_diff = (s8)rtw_adaptivity_th_edcca_hl_diff;
|
|
registry_par->boffefusemask = (u8)rtw_OffEfuseMask;
|
registry_par->bFileMaskEfuse = (u8)rtw_FileMaskEfuse;
|
registry_par->bBTFileMaskEfuse = (u8)rtw_FileMaskEfuse;
|
|
#ifdef CONFIG_RTW_ACS
|
registry_par->acs_mode = (u8)rtw_acs;
|
registry_par->acs_auto_scan = (u8)rtw_acs_auto_scan;
|
#endif
|
|
registry_par->reg_rxgain_offset_2g = (u32) rtw_rxgain_offset_2g;
|
registry_par->reg_rxgain_offset_5gl = (u32) rtw_rxgain_offset_5gl;
|
registry_par->reg_rxgain_offset_5gm = (u32) rtw_rxgain_offset_5gm;
|
registry_par->reg_rxgain_offset_5gh = (u32) rtw_rxgain_offset_5gh;
|
|
#ifdef CONFIG_DFS_MASTER
|
registry_par->dfs_region_domain = (u8)rtw_dfs_region_domain;
|
if (registry_par->dfs_region_domain != RTW_DFS_REGD_NONE) {
|
RTW_WARN("%s force disable radar detection capability for now\n", __func__);
|
registry_par->dfs_region_domain = RTW_DFS_REGD_NONE;
|
}
|
#ifdef CONFIG_REGD_SRC_FROM_OS
|
if (rtw_regd_src == REGD_SRC_OS && registry_par->dfs_region_domain != RTW_DFS_REGD_NONE) {
|
RTW_WARN("%s force disable radar detection capability when regd_src is OS\n", __func__);
|
registry_par->dfs_region_domain = RTW_DFS_REGD_NONE;
|
}
|
#endif
|
#endif
|
|
#ifdef CONFIG_WOWLAN
|
registry_par->wowlan_enable = rtw_wow_enable;
|
registry_par->wakeup_event = rtw_wakeup_event;
|
registry_par->suspend_type = rtw_suspend_type;
|
#endif
|
|
registry_par->wowlan_sta_mix_mode = rtw_wowlan_sta_mix_mode;
|
|
#ifdef CONFIG_PCI_HCI
|
registry_par->pci_aspm_config = rtw_pci_aspm_enable;
|
registry_par->pci_dynamic_aspm_linkctrl = rtw_pci_dynamic_aspm_linkctrl;
|
#endif
|
|
#ifdef CONFIG_RTW_NAPI
|
registry_par->en_napi = (u8)rtw_en_napi;
|
#ifdef CONFIG_RTW_NAPI_DYNAMIC
|
registry_par->napi_threshold = (u32)rtw_napi_threshold;
|
#endif /* CONFIG_RTW_NAPI_DYNAMIC */
|
#ifdef CONFIG_RTW_GRO
|
registry_par->en_gro = (u8)rtw_en_gro;
|
if (!registry_par->en_napi && registry_par->en_gro) {
|
registry_par->en_gro = 0;
|
RTW_WARN("Disable GRO because NAPI is not enabled\n");
|
}
|
#endif /* CONFIG_RTW_GRO */
|
#endif /* CONFIG_RTW_NAPI */
|
|
registry_par->iqk_fw_offload = (u8)rtw_iqk_fw_offload;
|
registry_par->ch_switch_offload = (u8)rtw_ch_switch_offload;
|
|
#ifdef CONFIG_TDLS
|
registry_par->en_tdls = rtw_en_tdls;
|
#endif
|
|
|
#ifdef CONFIG_FW_OFFLOAD_PARAM_INIT
|
registry_par->fw_param_init = rtw_fw_param_init;
|
#endif
|
#ifdef CONFIG_AP_MODE
|
registry_par->bmc_tx_rate = rtw_bmc_tx_rate;
|
#if CONFIG_RTW_AP_DATA_BMC_TO_UC
|
registry_par->ap_src_b2u_flags = rtw_ap_src_b2u_flags;
|
registry_par->ap_fwd_b2u_flags = rtw_ap_fwd_b2u_flags;
|
#endif
|
#endif /* CONFIG_AP_MODE */
|
|
#ifdef CONFIG_RTW_MESH
|
#if CONFIG_RTW_MESH_DATA_BMC_TO_UC
|
registry_par->msrc_b2u_flags = rtw_msrc_b2u_flags;
|
registry_par->mfwd_b2u_flags = rtw_mfwd_b2u_flags;
|
#endif
|
#endif /* CONFIG_RTW_MESH */
|
|
registry_par->phydm_ability = rtw_phydm_ability;
|
registry_par->halrf_ability = rtw_halrf_ability;
|
#ifdef CONFIG_RTW_MESH
|
registry_par->peer_alive_based_preq = rtw_peer_alive_based_preq;
|
#endif
|
|
#ifdef RTW_BUSY_DENY_SCAN
|
registry_par->scan_interval_thr = rtw_scan_interval_thr;
|
#endif
|
|
#ifdef CONFIG_RTW_MULTI_AP
|
rtw_regsty_init_unassoc_sta_param(registry_par);
|
#endif
|
|
#ifdef CONFIG_IOCTL_CFG80211
|
registry_par->roch_min_home_dur = (u16)rtw_roch_min_home_dur;
|
registry_par->roch_max_away_dur = (u16)rtw_roch_max_away_dur;
|
registry_par->roch_extend_dur = (u16)rtw_roch_extend_dur;
|
#endif
|
|
#if defined(ROKU_PRIVATE) && defined(CONFIG_P2P)
|
registry_par->go_hidden_ssid_mode = rtw_go_hidden_ssid_mode;
|
ATOMIC_SET(®istry_par->set_hide_ssid_timer, 0);
|
#endif
|
registry_par->amsdu_mode = (u8)rtw_amsdu_mode;
|
return status;
|
}
|
|
static void rtw_cfg_adaptivity_en_msg(void *sel, _adapter *adapter)
|
{
|
struct registry_priv *regsty = &adapter->registrypriv;
|
|
RTW_PRINT_SEL(sel, "RTW_ADAPTIVITY_EN_");
|
|
if (regsty->adaptivity_en == RTW_ADAPTIVITY_EN_DISABLE)
|
_RTW_PRINT_SEL(sel, "DISABLE\n");
|
else if (regsty->adaptivity_en == RTW_ADAPTIVITY_EN_ENABLE)
|
_RTW_PRINT_SEL(sel, "ENABLE\n");
|
else if (regsty->adaptivity_en == RTW_ADAPTIVITY_EN_AUTO)
|
_RTW_PRINT_SEL(sel, "AUTO\n");
|
else
|
_RTW_PRINT_SEL(sel, "INVALID\n");
|
}
|
|
static void rtw_cfg_adaptivity_mode_msg(void *sel, _adapter *adapter)
|
{
|
struct registry_priv *regsty = &adapter->registrypriv;
|
|
if (regsty->adaptivity_en != RTW_ADAPTIVITY_EN_ENABLE)
|
return;
|
|
RTW_PRINT_SEL(sel, "RTW_ADAPTIVITY_MODE_");
|
|
if (regsty->adaptivity_mode == RTW_ADAPTIVITY_MODE_NORMAL)
|
_RTW_PRINT_SEL(sel, "NORMAL\n");
|
else if (regsty->adaptivity_mode == RTW_ADAPTIVITY_MODE_CARRIER_SENSE)
|
_RTW_PRINT_SEL(sel, "CARRIER_SENSE\n");
|
else
|
_RTW_PRINT_SEL(sel, "INVALID\n");
|
}
|
|
void rtw_cfg_adaptivity_config_msg(void *sel, _adapter *adapter)
|
{
|
rtw_cfg_adaptivity_en_msg(sel, adapter);
|
rtw_cfg_adaptivity_mode_msg(sel, adapter);
|
}
|
|
bool rtw_cfg_adaptivity_needed(_adapter *adapter)
|
{
|
struct registry_priv *regsty = &adapter->registrypriv;
|
bool ret = _FALSE;
|
|
if (regsty->adaptivity_en)
|
ret = _TRUE;
|
|
return ret;
|
}
|
