/** @file
|
*
|
* Copyright (c) 2018, Andrei Warkentin <andrey.warkentin@gmail.com>
|
* Copyright (c) 2020, ARM Limited. All rights reserved.
|
*
|
* SPDX-License-Identifier: BSD-2-Clause-Patent
|
*
|
**/
|
|
#langdef en-US "English"
|
|
#string STR_NULL_STRING #language en-US ""
|
|
#string STR_FORM_SET_TITLE #language en-US "Raspberry Pi Configuration"
|
#string STR_FORM_SET_TITLE_HELP #language en-US "Press <Enter> to configure system settings."
|
|
/*
|
* Chipset configuration.
|
*/
|
|
#string STR_CHIPSET_FORM_TITLE #language en-US "CPU Configuration"
|
#string STR_CHIPSET_FORM_SUBTITLE #language en-US "Note: OS may override settings."
|
|
#string STR_CHIPSET_CLOCK_CPU_PROMPT #language en-US "CPU Clock"
|
#string STR_CHIPSET_CLOCK_CPU_HELP #language en-US "CPU Speed"
|
#string STR_CHIPSET_CLOCK_CPU_LOW #language en-US "Low"
|
#string STR_CHIPSET_CLOCK_CPU_DEF #language en-US "Default"
|
#string STR_CHIPSET_CLOCK_CPU_MAX #language en-US "Max"
|
#string STR_CHIPSET_CLOCK_CPU_CUSTOM #language en-US "Custom"
|
|
#string STR_CHIPSET_CUSTOM_CPU_CLOCK_PROMPT #language en-US "CPU Clock Rate (MHz)"
|
#string STR_CHIPSET_CUSTOM_CPU_CLOCK_HELP #language en-US "Manually set the CPU Speed\n\nWarning: Overclocking can make the system unbootable!"
|
|
/*
|
* Advanced configuration.
|
*/
|
|
#string STR_ADVANCED_FORM_TITLE #language en-US "Advanced Configuration"
|
|
#string STR_ADVANCED_3GB_PROMPT #language en-US "Limit RAM to 3 GB"
|
#string STR_ADVANCED_3GB_HELP #language en-US "OSes not supporting ACPI DMA constraints require a 3 GB limit or face broken xHCI USB"
|
#string STR_ADVANCED_3GB_OFF #language en-US "Disabled"
|
#string STR_ADVANCED_3GB_ON #language en-US "Enabled"
|
|
#string STR_ADVANCED_SYSTAB_PROMPT #language en-US "System Table Selection"
|
#string STR_ADVANCED_SYSTAB_HELP #language en-US "ACPI/DT choice for specific OSes"
|
#string STR_ADVANCED_SYSTAB_ACPI #language en-US "ACPI"
|
#string STR_ADVANCED_SYSTAB_BOTH #language en-US "ACPI + Devicetree"
|
#string STR_ADVANCED_SYSTAB_DT #language en-US "Devicetree"
|
|
#string STR_ADVANCED_FANONGPIO_PROMPT #language en-US "ACPI fan control"
|
#string STR_ADVANCED_FANONGPIO_HELP #language en-US "Cycle a fan via GPIO at given temperature"
|
#string STR_ADVANCED_FANONGPIO_OFF #language en-US "Disabled"
|
#string STR_ADVANCED_FANONGPIO_18 #language en-US "Fan Shim/GPIO-18"
|
#string STR_ADVANCED_FANONGPIO_19 #language en-US "GPIO-19"
|
|
#string STR_ADVANCED_FANTEMP_PROMPT #language en-US "ACPI fan temperature"
|
#string STR_ADVANCED_FANTEMP_HELP #language en-US "Cycle a fan at C"
|
|
#string STR_ADVANCED_XHCIPCI_PROMPT #language en-US "ACPI XHCI/PCIe"
|
#string STR_ADVANCED_XHCIPCI_HELP #language en-US "OS sees XHCI USB platform device or PCIe bridge"
|
#string STR_ADVANCED_XHCIPCI_XHCI #language en-US "XHCI"
|
#string STR_ADVANCED_XHCIPCI_PCIE #language en-US "PCIe"
|
|
#string STR_ADVANCED_ASSET_TAG_PROMPT #language en-US "Asset Tag"
|
#string STR_ADVANCED_ASSET_TAG_HELP #language en-US "Set the system Asset Tag"
|
|
/*
|
* MMC/SD configuration.
|
*/
|
|
#string STR_MMC_FORM_TITLE #language en-US "SD/MMC Configuration"
|
#string STR_MMC_FORM_SUBTITLE #language en-US "Note: UEFI only, OS may override settings."
|
|
#string STR_MMC_SD_PROMPT #language en-US "uSD/eMMC Routing"
|
#string STR_MMC_SD_HELP #language en-US "Choose host controller to drive local flash storage"
|
#string STR_MMC_SD_EMMC2 #language en-US "eMMC2 SDHCI"
|
#string STR_MMC_SD_SDHOST #language en-US "Broadcom SDHOST"
|
#string STR_MMC_SD_ARASAN #language en-US "Arasan SDHCI"
|
|
#string STR_MMC_DISMULTI_PROMPT #language en-US "Multi-Block Support"
|
#string STR_MMC_DISMULTI_HELP #language en-US "Use CMD18/CMD25 for transfers when possible"
|
#string STR_MMC_DISMULTI_N #language en-US "Multi-block transfers"
|
#string STR_MMC_DISMULTI_Y #language en-US "Single-block transfers"
|
|
#string STR_MMC_FORCE1BIT_PROMPT #language en-US "uSD Max Bus Width"
|
#string STR_MMC_FORCE1BIT_HELP #language en-US "Tweak for bad media (N/A for eMMC)"
|
#string STR_MMC_FORCE1BIT_Y #language en-US "1 Bit Mode"
|
#string STR_MMC_FORCE1BIT_N #language en-US "4 Bit Mode"
|
|
#string STR_MMC_FORCEDS_PROMPT #language en-US "uSD Force Default Speed"
|
#string STR_MMC_FORCEDS_HELP #language en-US "Tweak for bad media (N/A for eMMC)"
|
#string STR_MMC_FORCEDS_Y #language en-US "Force Default Speed"
|
#string STR_MMC_FORCEDS_N #language en-US "Allow High Speed"
|
|
#string STR_MMC_SD_DS_PROMPT #language en-US "SD Default Speed (MHz)"
|
#string STR_MMC_SD_DS_HELP #language en-US "Override default 25Mhz"
|
|
#string STR_MMC_SD_HS_PROMPT #language en-US "SD High Speed (MHz)"
|
#string STR_MMC_SD_HS_HELP #language en-US "Override default 50Mhz"
|
|
#string STR_MMC_EMMC_PROMPT #language en-US "Enable eMMC DMA modes"
|
#string STR_MMC_EMMC_PIO #language en-US "PIO"
|
#string STR_MMC_EMMC_DMA #language en-US "SDMA/ADMA2"
|
#string STR_MMC_EMMC_HELP #language en-US "Enable eMMC DMA modes for OSes that support ACPI _DMA() translations"
|
|
/*
|
* Display settings.
|
*/
|
|
#string STR_DISPLAY_FORM_TITLE #language en-US "Display Configuration"
|
#string STR_DISPLAY_FORM_SUBTITLE #language en-US "UEFI video driver settings"
|
|
#string STR_DISPLAY_VMODES_640_PROMPT #language en-US "Virtual 640x480"
|
#string STR_DISPLAY_VMODES_640_HELP #language en-US "Enable scaled 640x480 mode"
|
#string STR_DISPLAY_VMODES_800_PROMPT #language en-US "Virtual 800x600"
|
#string STR_DISPLAY_VMODES_800_HELP #language en-US "Enable scaled 800x600 mode"
|
#string STR_DISPLAY_VMODES_1024_PROMPT #language en-US "Virtual 1024x768"
|
#string STR_DISPLAY_VMODES_1024_HELP #language en-US "Enable scaled 1024x768 mode"
|
#string STR_DISPLAY_VMODES_720_PROMPT #language en-US "Virtual 720p"
|
#string STR_DISPLAY_VMODES_720_HELP #language en-US "Enable scaled 720p mode"
|
#string STR_DISPLAY_VMODES_1080_PROMPT #language en-US "Virtual 1080p"
|
#string STR_DISPLAY_VMODES_1080_HELP #language en-US "Enable scaled 1080p mode"
|
|
#string STR_DISPLAY_VMODES_REAL_PROMPT #language en-US "Native resolution"
|
#string STR_DISPLAY_VMODES_REAL_HELP #language en-US "Native resolution"
|
|
#string STR_DISPLAY_SSHOT_PROMPT #language en-US "Screenshot Support"
|
#string STR_DISPLAY_SSHOT_HELP #language en-US "Save screen capture as a BMP on the first writable file system found"
|
#string STR_DISPLAY_SSHOT_ENABLE #language en-US "Control-Alt-F12"
|
#string STR_DISPLAY_SSHOT_DISABLE #language en-US "Not Enabled"
|
|
/*
|
* Debugging settings go here.
|
*/
|
#string STR_DEBUG_FORM_TITLE #language en-US "Debugging Configuration"
|
#string STR_DEBUG_FORM_SUBTITLE #language en-US "For UEFI/OS Developers"
|
|
#string STR_DEBUG_JTAG_PROMPT #language en-US "JTAG Routing"
|
#string STR_DEBUG_JTAG_HELP #language en-US "Signals (nTRST, TDI, TMS, TCK, RTCK, TDO) -> Header pins (15, 7, 13, 22, 16, 18)"
|
#string STR_DEBUG_JTAG_ENABLE #language en-US "Enable JTAG via GPIO"
|
#string STR_DEBUG_JTAG_DISABLE #language en-US "Disable JTAG"
|
