forked from ~ljy/RK3588_XEN

blame | history | raw

Marvell CN913x Development Board

Summary

This is a port of 64-bit TianoCore EDK II firmware for the Marvell CN913x Development Board.

Building the firmware

Prepare toolchain (for cross-compilation only):

  1. Download the toolchain:

wget https://releases.linaro.org/components/toolchain/binaries/7.5-2019.12/aarch64-linux-gnu/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu.tar.xz

  1. After extracting, setup the path and compiler prefix to GCC5_AARCH64_PREFIX variable:

export GCC5_AARCH64_PREFIX=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-

Prepare prerequisites

  1. Create a new folder (directory) on your local development machine
    for use as your workspace. This example uses /work/git/tianocore, modify as
    appropriate for your needs.

$ export WORKSPACE=/work/git/tianocore $ mkdir -p $WORKSPACE $ cd $WORKSPACE

  1. Clone the Trusted Firmware repository:

$ cd ${WORKSPACE} $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
1. Clone repository for auxiliary firmware on the SoC co-processors and checkout to binaries-marvell-armada-SDK10.0.1.0:

$ cd ${WORKSPACE} $ git clone https://github.com/MarvellEmbeddedProcessors/binaries-marvell.git $ cd binaries-marvell/ $ git checkout -b binaries-marvell-armada-SDK10.0.1.0 origin/binaries-marvell-armada-SDK10.0.1.0
1. Clone the DDR training code from:

$ cd ${WORKSPACE} $ git clone https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git

Prepare EDKII environment:

Please follow instructions from "Obtaining source code" and "Manual building" from the top level edk2-platforms Readme.md.

Build EDKII:

  1. Use below build command:

$ cd ${WORKSPACE} $ build -a AARCH64 -t GCC5 -b RELEASE -D CN9132 -D INCLUDE_TFTP_COMMAND -D CAPSULE_ENABLE -p Platform/Marvell/Cn913xDb/Cn913xDbA.dsc

Build the final firmware image:

  1. Set BL33 variable to path to EDK II output binary:

$ export BL33=${WORKSPACE}/Build/Cn9132DbA-AARCH64/RELEASE_GCC5/FV/ARMADA_EFI.fd
1. Export SCP_BL2 variable:

$ export SCP_BL2=${WORKSKPACE}/binaries-marvell/mrvl_scp_bl2.img
1. Export compiler variables (for cross-compilation only):

$ export ARCH=arm64 $ export CROSS_COMPILE=<toolchain_path>/gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
1. Build the image:

```
$ cd ${WORKSPACE}/trusted-firmware-a/
$ make LOG_LEVEL=20 MV_DDR_PATH=${WORKSPACE}/mv-ddr-marvell CP_NUM=3 PLAT=t9130 all fip mrvl_flash

`` The firmware imageflash-image.bincan be found inbuild/t9130/release/` directory.

ARM System Ready certification.

CN913x Development Board is System Ready ES certified. Release binary and the firmware components' baselines list are available in a dedicated wiki page.