// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
/*
|
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
*
|
*/
|
|
#include "dt-bindings/usb/pd.h"
|
#include "rk3588s.dtsi"
|
#include "rk3588s-orangepi.dtsi"
|
#include "rk3588-rk806-single.dtsi"
|
|
/ {
|
combophy_avdd0v85: combophy-avdd0v85 {
|
compatible = "regulator-fixed";
|
regulator-name = "combophy_avdd0v85";
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-min-microvolt = <850000>;
|
regulator-max-microvolt = <850000>;
|
vin-supply = <&vdd_0v85_s0>;
|
};
|
|
combophy_avdd1v8: combophy-avdd1v8 {
|
compatible = "regulator-fixed";
|
regulator-name = "combophy_avdd1v8";
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
vin-supply = <&avcc_1v8_s0>;
|
};
|
|
es8388_sound: es8388-sound {
|
status = "okay";
|
compatible = "rockchip,multicodecs-card";
|
rockchip,card-name = "rockchip-es8388";
|
hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
|
io-channels = <&saradc 3>;
|
io-channel-names = "adc-detect";
|
keyup-threshold-microvolt = <1800000>;
|
poll-interval = <100>;
|
rockchip,format = "i2s";
|
rockchip,mclk-fs = <256>;
|
rockchip,cpu = <&i2s1_8ch>;
|
rockchip,codec = <&es8388>;
|
rockchip,audio-routing =
|
"Headphone", "LOUT1",
|
"Headphone", "ROUT1",
|
"Headphone", "Headphone Power",
|
"Headphone", "Headphone Power",
|
"LINPUT1", "Main Mic",
|
"LINPUT2", "Main Mic",
|
"RINPUT1", "Headset Mic",
|
"RINPUT2", "Headset Mic";
|
pinctrl-names = "default";
|
pinctrl-0 = <&hp_det>;
|
play-pause-key {
|
label = "playpause";
|
linux,code = <KEY_PLAYPAUSE>;
|
press-threshold-microvolt = <2000>;
|
};
|
};
|
|
wireless_bluetooth: wireless-bluetooth {
|
compatible = "bluetooth-platdata";
|
clocks = <&hym8563>;
|
clock-names = "ext_clock";
|
uart_rts_gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
|
pinctrl-names = "default", "rts_gpio";
|
pinctrl-0 = <&uart9m2_rtsn>, <&bt_gpio>;
|
pinctrl-1 = <&uart9_gpios>;
|
BT,reset_gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
|
BT,wake_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
status = "disabled";
|
};
|
|
wireless_wlan: wireless-wlan {
|
compatible = "wlan-platdata";
|
wifi_chip_type = "ap6275p";
|
pinctrl-names = "default";
|
pinctrl-0 = <&wifi_host_wake_irq>, <&wifi_poweren_gpio>;
|
WIFI,host_wake_irq = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
WIFI,poweren_gpio = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>;
|
status = "disabled";
|
};
|
|
vbus5v0_typec: vbus5v0-typec {
|
compatible = "regulator-fixed";
|
regulator-name = "vbus5v0_typec";
|
regulator-min-microvolt = <5000000>;
|
regulator-max-microvolt = <5000000>;
|
enable-active-high;
|
gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
|
vin-supply = <&vcc5v0_usb>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&typec5v_pwren>;
|
};
|
};
|
|
&pwm6 {
|
status = "okay";
|
pinctrl-names = "active";
|
pinctrl-0 = <&pwm6m0_pins>;
|
};
|
|
&pwm2 {
|
status = "okay";
|
pinctrl-names = "active";
|
pinctrl-0 = <&pwm2m0_pins>;
|
};
|
|
&backlight_1 {
|
pwms = <&pwm6 0 25000 0>;
|
status = "okay";
|
};
|
|
&backlight {
|
pwms = <&pwm2 0 25000 0>;
|
status = "okay";
|
};
|
|
&combphy0_ps {
|
status = "okay";
|
};
|
|
&dp0 {
|
status = "okay";
|
};
|
|
&dp0_in_vp1 {
|
status = "disabled";
|
};
|
|
&dp0_in_vp2 {
|
status = "okay";
|
};
|
|
&dp0_sound{
|
status = "okay";
|
};
|
|
&spdif_tx2{
|
status = "okay";
|
};
|
|
&mipi_dcphy0 {
|
status = "okay";
|
};
|
|
&mipi_dcphy1 {
|
status = "okay";
|
};
|
|
&i2c6 {
|
status = "okay";
|
pinctrl-names = "default";
|
pinctrl-0 = <&i2c6m3_xfer>;
|
|
es8388: es8388@10 {
|
status = "okay";
|
#sound-dai-cells = <0>;
|
compatible = "everest,es8388", "everest,es8323";
|
reg = <0x10>;
|
clocks = <&mclkout_i2s1>;
|
clock-names = "mclk";
|
assigned-clocks = <&mclkout_i2s1>;
|
assigned-clock-rates = <12288000>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&i2s1m0_mclk>;
|
};
|
|
usbc0: fusb302@22 {
|
compatible = "fcs,fusb302";
|
reg = <0x22>;
|
interrupt-parent = <&gpio0>;
|
interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&usbc0_int>;
|
vbus-supply = <&vbus5v0_typec>;
|
status = "okay";
|
|
ports {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
port@0 {
|
reg = <0>;
|
usbc0_role_sw: endpoint@0 {
|
remote-endpoint = <&dwc3_0_role_switch>;
|
};
|
};
|
};
|
|
usb_con: connector {
|
compatible = "usb-c-connector";
|
label = "USB-C";
|
data-role = "dual";
|
power-role = "dual";
|
try-power-role = "sink";
|
op-sink-microwatt = <1000000>;
|
sink-pdos =
|
<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
|
source-pdos =
|
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
|
altmodes {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
altmode@0 {
|
reg = <0>;
|
svid = <0xff01>;
|
vdo = <0xffffffff>;
|
};
|
};
|
|
ports {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
port@0 {
|
reg = <0>;
|
usbc0_orien_sw: endpoint {
|
remote-endpoint = <&usbdp_phy0_orientation_switch>;
|
};
|
};
|
|
port@1 {
|
reg = <1>;
|
dp_altmode_mux: endpoint {
|
remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
|
};
|
};
|
};
|
};
|
};
|
|
hym8563: hym8563@51 {
|
compatible = "haoyu,hym8563";
|
reg = <0x51>;
|
#clock-cells = <0>;
|
clock-frequency = <32768>;
|
clock-output-names = "hym8563";
|
pinctrl-names = "default";
|
pinctrl-0 = <&hym8563_int>;
|
interrupt-parent = <&gpio0>;
|
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
wakeup-source;
|
};
|
};
|
|
&pcie2x1l1 {
|
status = "disabled";
|
};
|
|
&pcie2x1l2 {
|
reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
|
rockchip,skip-scan-in-resume;
|
status = "disabled";
|
};
|
|
&pinctrl {
|
sata {
|
sata_reset:sata-reset{
|
rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
};
|
|
headphone {
|
hp_det: hp-det {
|
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
hym8563 {
|
hym8563_int: hym8563-int {
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
};
|
|
lcd {
|
lcd0_rst_gpio: lcd0-rst-gpio {
|
rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
|
lcd1_rst_gpio: lcd1-rst-gpio {
|
rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
gpio-func {
|
leds_gpio: leds-gpio {
|
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
usb-typec {
|
usbc0_int: usbc0-int {
|
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
|
typec5v_pwren: typec5v-pwren {
|
rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
wireless-bluetooth {
|
uart9_gpios: uart9-gpios {
|
rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
|
bt_gpio: bt-gpio {
|
rockchip,pins =
|
<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
|
<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
};
|
|
wireless-wlan {
|
wifi_host_wake_irq: wifi-host-wake-irq {
|
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
|
};
|
|
wifi_poweren_gpio: wifi-poweren-gpio {
|
rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
};
|
};
|
|
&u2phy0_otg {
|
rockchip,typec-vbus-det;
|
status = "okay";
|
};
|
|
&uart9 {
|
status = "okay";
|
pinctrl-names = "default";
|
pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>;
|
};
|
|
&usbdp_phy0 {
|
orientation-switch;
|
svid = <0xff01>;
|
sbu1-dc-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
|
port {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
usbdp_phy0_orientation_switch: endpoint@0 {
|
reg = <0>;
|
remote-endpoint = <&usbc0_orien_sw>;
|
};
|
|
usbdp_phy0_dp_altmode_mux: endpoint@1 {
|
reg = <1>;
|
remote-endpoint = <&dp_altmode_mux>;
|
};
|
};
|
};
|
|
&usbdrd_dwc3_0 {
|
status = "okay";
|
dr_mode = "otg";
|
usb-role-switch;
|
port {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
dwc3_0_role_switch: endpoint@0 {
|
reg = <0>;
|
remote-endpoint = <&usbc0_role_sw>;
|
};
|
};
|
};
|
|
&combphy2_psu {
|
status = "okay";
|
};
|
|
&usbhost3_0 {
|
dr_mode = "host";
|
status = "okay";
|
};
|
|
&usbhost_dwc3_0 {
|
status = "okay";
|
};
|
