Banana Pi M1+
|
|
Intro
|
=====
|
|
This default configuration will allow you to start experimenting with the
|
Buildroot environment for the Banana Pi M1+. With the current configuration
|
it will bring-up the board, and allow access through the serial console.
|
|
How to build it
|
===============
|
|
Configure Buildroot:
|
|
$ make bananapi_m1_plus_defconfig
|
|
Compile everything and build the SD card image:
|
|
$ make
|
|
How to write the SD card
|
========================
|
|
Once the build process is finished you will have an image called "sdcard.img"
|
in the output/images/ directory.
|
|
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
|
$ dd if=output/images/sdcard.img of=/dev/sdX
|
|
Notes:
|
- replace 'sdX' with the actual device with your micro SD card
|
- you may need to be root to do that (use 'sudo')
|
|
Insert the micro SD card in your Banana Pi M1+ and power it up. The console
|
is on the debug TTL UART, 115200 8N1.
|
|
Ethernet
|
==========
|
|
# udhcpc -i eth0
|
|
Wifi
|
==========
|
|
# wpa_passphrase YOUR_SSID >> /etc/wpa_supplicant.conf
|
(enter the wifi password and press enter)
|
# wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
|
# udhcpc -i wlan0
|
|
Note:
|
- replace 'YOUR_SSID' with the actual SSID from your access point
|
|
Audio
|
==========
|
|
For this example you need package alsa-utils.
|
|
Connect a headphone to the 3.5mm jack (TRRS). Note, that the Banana Pi M1+
|
has an on-board microphone, too.
|
|
# amixer cset name='Power Amplifier DAC Playback Switch' on
|
# amixer cset name='Power Amplifier Mute Switch' on
|
# amixer cset name='Power Amplifier Volume' 42
|
