RADXA ROCKPI-N8
|
================
|
https://wiki.radxa.com/RockpiN8
|
|
Build:
|
======
|
$ make rock_pi_n8_defconfig
|
$ make
|
|
Files created in output directory
|
=================================
|
|
output/images
|
.
|
├── boot.vfat
|
├── extlinux
|
├── idbloader.img
|
├── rk3288-rock-pi-n8.dtb
|
├── rootfs.ext2
|
├── rootfs.ext4 -> rootfs.ext2
|
├── rootfs.tar
|
├── sdcard.img
|
├── u-boot.bin
|
├── u-boot-dtb.bin
|
├── u-boot-dtb.img
|
└── zImage
|
|
Creating bootable SD card:
|
==========================
|
|
Simply invoke (as root)
|
|
sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
|
|
Where X is your SD card device.
|
|
Booting:
|
========
|
|
Serial console:
|
---------------
|
RockPi-N8 has a 40-pin GPIO header. The pin layout is as follows:
|
|
pin 6: gnd
|
pin 8: tx
|
pin 10: rx
|
|
Baudrate for this board is 115200.
|
|
The boot order on rockpi-n8 is emmc, sd. If emmc contains a valid Image, the board
|
always boots from emmc. To boot from SD, erase emmc as per the guide:
|
|
https://wiki.amarulasolutions.com/bsp/setup/rockchip/rk3399_emmc.html
|
|
Login:
|
------
|
Enter 'root' as login user, and the prompt is ready.
|
|
wiki link:
|
----------
|
https://wiki.amarulasolutions.com/bsp/rockchip/rk3288/rock-pi-n8.html
|
