// SPDX-License-Identifier: GPL-2.0+
|
/*
|
* FB driver for the TLS8204 LCD Controller
|
*
|
* The display is monochrome and the video memory is RGB565.
|
* Any pixel value except 0 turns the pixel on.
|
*
|
* Copyright (C) 2013 Noralf Tronnes
|
* Copyright (C) 2014 Michael Hope (adapted for the TLS8204)
|
*/
|
|
#include <linux/module.h>
|
#include <linux/kernel.h>
|
#include <linux/init.h>
|
#include <linux/gpio/consumer.h>
|
#include <linux/spi/spi.h>
|
#include <linux/delay.h>
|
|
#include "fbtft.h"
|
|
#define DRVNAME "fb_tls8204"
|
#define WIDTH 84
|
#define HEIGHT 48
|
#define TXBUFLEN WIDTH
|
|
/* gamma is used to control contrast in this driver */
|
#define DEFAULT_GAMMA "40"
|
|
static unsigned int bs = 4;
|
module_param(bs, uint, 0000);
|
MODULE_PARM_DESC(bs, "BS[2:0] Bias voltage level: 0-7 (default: 4)");
|
|
static int init_display(struct fbtft_par *par)
|
{
|
par->fbtftops.reset(par);
|
|
/* Enter extended command mode */
|
write_reg(par, 0x21); /* 5:1 1
|
* 2:0 PD - Powerdown control: chip is active
|
* 1:0 V - Entry mode: horizontal addressing
|
* 0:1 H - Extended instruction set control:
|
* extended
|
*/
|
|
/* H=1 Bias system */
|
write_reg(par, 0x10 | (bs & 0x7));
|
/* 4:1 1
|
* 3:0 0
|
* 2:x BS2 - Bias System
|
* 1:x BS1
|
* 0:x BS0
|
*/
|
|
/* Set the address of the first display line. */
|
write_reg(par, 0x04 | (64 >> 6));
|
write_reg(par, 0x40 | (64 & 0x3F));
|
|
/* Enter H=0 standard command mode */
|
write_reg(par, 0x20);
|
|
/* H=0 Display control */
|
write_reg(par, 0x08 | 4);
|
/* 3:1 1
|
* 2:1 D - DE: 10=normal mode
|
* 1:0 0
|
* 0:0 E
|
*/
|
|
return 0;
|
}
|
|
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
|
{
|
/* H=0 Set X address of RAM */
|
write_reg(par, 0x80); /* 7:1 1
|
* 6-0: X[6:0] - 0x00
|
*/
|
|
/* H=0 Set Y address of RAM */
|
write_reg(par, 0x40); /* 7:0 0
|
* 6:1 1
|
* 2-0: Y[2:0] - 0x0
|
*/
|
}
|
|
static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
|
{
|
u16 *vmem16 = (u16 *)par->info->screen_buffer;
|
int x, y, i;
|
int ret = 0;
|
|
for (y = 0; y < HEIGHT / 8; y++) {
|
u8 *buf = par->txbuf.buf;
|
/* The display is 102x68 but the LCD is 84x48.
|
* Set the write pointer at the start of each row.
|
*/
|
gpiod_set_value(par->gpio.dc, 0);
|
write_reg(par, 0x80 | 0);
|
write_reg(par, 0x40 | y);
|
|
for (x = 0; x < WIDTH; x++) {
|
u8 ch = 0;
|
|
for (i = 0; i < 8 * WIDTH; i += WIDTH) {
|
ch >>= 1;
|
if (vmem16[(y * 8 * WIDTH) + i + x])
|
ch |= 0x80;
|
}
|
*buf++ = ch;
|
}
|
/* Write the row */
|
gpiod_set_value(par->gpio.dc, 1);
|
ret = par->fbtftops.write(par, par->txbuf.buf, WIDTH);
|
if (ret < 0) {
|
dev_err(par->info->device,
|
"write failed and returned: %d\n", ret);
|
break;
|
}
|
}
|
|
return ret;
|
}
|
|
static int set_gamma(struct fbtft_par *par, u32 *curves)
|
{
|
/* apply mask */
|
curves[0] &= 0x7F;
|
|
write_reg(par, 0x21); /* turn on extended instruction set */
|
write_reg(par, 0x80 | curves[0]);
|
write_reg(par, 0x20); /* turn off extended instruction set */
|
|
return 0;
|
}
|
|
static struct fbtft_display display = {
|
.regwidth = 8,
|
.width = WIDTH,
|
.height = HEIGHT,
|
.txbuflen = TXBUFLEN,
|
.gamma_num = 1,
|
.gamma_len = 1,
|
.gamma = DEFAULT_GAMMA,
|
.fbtftops = {
|
.init_display = init_display,
|
.set_addr_win = set_addr_win,
|
.write_vmem = write_vmem,
|
.set_gamma = set_gamma,
|
},
|
.backlight = 1,
|
};
|
|
FBTFT_REGISTER_DRIVER(DRVNAME, "teralane,tls8204", &display);
|
|
MODULE_ALIAS("spi:" DRVNAME);
|
MODULE_ALIAS("spi:tls8204");
|
|
MODULE_DESCRIPTION("FB driver for the TLS8204 LCD Controller");
|
MODULE_AUTHOR("Michael Hope");
|
MODULE_LICENSE("GPL");
|
