hc
2025-02-14 bbb9540dc49f70f6b703d1c8d1b85fa5f602d86e
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
 
#include "dm814x.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
 
/ {
   model = "DM8148 EVM";
   compatible = "ti,dm8148-evm", "ti,dm8148", "ti,dm814";
 
   memory@80000000 {
       device_type = "memory";
       reg = <0x80000000 0x40000000>;    /* 1 GB */
   };
 
   /* MIC94060YC6 controlled by SD1_POW pin */
   vmmcsd_fixed: fixedregulator0 {
       compatible = "regulator-fixed";
       regulator-name = "vmmcsd_fixed";
       regulator-min-microvolt = <3300000>;
       regulator-max-microvolt = <3300000>;
   };
};
 
&cpsw_emac0 {
   phy-handle = <&ethphy0>;
   phy-mode = "rgmii-id";
};
 
&cpsw_emac1 {
   phy-handle = <&ethphy1>;
   phy-mode = "rgmii-id";
};
 
&davinci_mdio {
   ethphy0: ethernet-phy@0 {
       reg = <0>;
   };
 
   ethphy1: ethernet-phy@1 {
       reg = <1>;
   };
};
 
&gpmc {
   ranges = <0 0 0x04000000 0x01000000>;    /* CS0: 16MB for NAND */
 
   nand@0,0 {
       compatible = "ti,omap2-nand";
       reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
       interrupt-parent = <&gpmc>;
       interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
                <1 IRQ_TYPE_NONE>; /* termcount */
       linux,mtd-name= "micron,mt29f2g16aadwp";
       #address-cells = <1>;
       #size-cells = <1>;
       ti,nand-ecc-opt = "bch8";
       nand-bus-width = <16>;
       gpmc,device-width = <2>;
       gpmc,sync-clk-ps = <0>;
       gpmc,cs-on-ns = <0>;
       gpmc,cs-rd-off-ns = <44>;
       gpmc,cs-wr-off-ns = <44>;
       gpmc,adv-on-ns = <6>;
       gpmc,adv-rd-off-ns = <34>;
       gpmc,adv-wr-off-ns = <44>;
       gpmc,we-on-ns = <0>;
       gpmc,we-off-ns = <40>;
       gpmc,oe-on-ns = <0>;
       gpmc,oe-off-ns = <54>;
       gpmc,access-ns = <64>;
       gpmc,rd-cycle-ns = <82>;
       gpmc,wr-cycle-ns = <82>;
       gpmc,bus-turnaround-ns = <0>;
       gpmc,cycle2cycle-delay-ns = <0>;
       gpmc,clk-activation-ns = <0>;
       gpmc,wr-access-ns = <40>;
       gpmc,wr-data-mux-bus-ns = <0>;
       partition@0 {
           label = "X-Loader";
           reg = <0 0x80000>;
       };
       partition@0x80000 {
           label = "U-Boot";
           reg = <0x80000 0x1c0000>;
       };
       partition@0x1c0000 {
           label = "Environment";
           reg = <0x240000 0x40000>;
       };
       partition@0x280000 {
           label = "Kernel";
           reg = <0x280000 0x500000>;
       };
       partition@0x780000 {
           label = "Filesystem";
           reg = <0x780000 0xf880000>;
       };
   };
};
 
&mmc1 {
        status = "disabled";
};
 
&mmc2 {
   pinctrl-names = "default";
   pinctrl-0 = <&sd1_pins>;
   vmmc-supply = <&vmmcsd_fixed>;
   bus-width = <4>;
   cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
};
 
&mmc3 {
        status = "disabled";
};
 
&pincntl {
   sd1_pins: pinmux_sd1_pins {
       pinctrl-single,pins = <
           DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)    /* SD1_CLK */
           DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP |  0x1)    /* SD1_CMD */
           DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP |  0x1)    /* SD1_DAT[0] */
           DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP |  0x1)    /* SD1_DAT[1] */
           DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP |  0x1)    /* SD1_DAT[2] */
           DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP |  0x1)    /* SD1_DAT[3] */
           DM814X_IOPAD(0x0924, PIN_OUTPUT |  0x40)    /* SD1_POW */
           DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP |  0x80)    /* GP1[6] */
           >;
   };
 
   usb0_pins: pinmux_usb0_pins {
       pinctrl-single,pins = <
           DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)    /* USB0_DRVVBUS */
           >;
   };
 
   usb1_pins: pinmux_usb1_pins {
       pinctrl-single,pins = <
           DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80)    /* USB1_DRVVBUS */
           >;
   };
};
 
&usb0 {
   pinctrl-names = "default";
   pinctrl-0 = <&usb0_pins>;
   dr_mode = "host";
};
 
&usb1 {
   pinctrl-names = "default";
   pinctrl-0 = <&usb1_pins>;
   dr_mode = "host";
};