// SPDX-License-Identifier: GPL-2.0-only
|
/*
|
* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
|
*/
|
|
/*
|
* VScom OnRISC
|
* http://www.vscom.de
|
*/
|
|
/dts-v1/;
|
|
#include "am335x-baltos.dtsi"
|
#include "am335x-baltos-leds.dtsi"
|
|
/ {
|
model = "NetCom Plus";
|
};
|
|
&am33xx_pinmux {
|
uart1_pins: pinmux_uart1_pins {
|
pinctrl-single,pins = <
|
AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) /* RX */
|
AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) /* TX */
|
AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) /* CTS */
|
AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* RTS */
|
AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* DTR */
|
AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DSR */
|
AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DCD */
|
AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* RI */
|
>;
|
};
|
|
uart2_pins: pinmux_uart2_pins {
|
pinctrl-single,pins = <
|
AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* RX */
|
AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* TX */
|
AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2) /* CTS */
|
AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* RTS */
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* DTR */
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DSR */
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DCD */
|
AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* RI */
|
>;
|
};
|
};
|
|
&usb0_phy {
|
status = "okay";
|
};
|
|
&usb0 {
|
status = "okay";
|
dr_mode = "host";
|
};
|
|
&uart1 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&uart1_pins>;
|
dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
|
dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
|
dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
|
rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
};
|
|
&uart2 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&uart2_pins>;
|
dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
|
dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
};
|
|
&davinci_mdio {
|
phy0: ethernet-phy@0 {
|
reg = <1>;
|
};
|
};
|
|
&cpsw_emac0 {
|
phy-mode = "rmii";
|
dual_emac_res_vlan = <1>;
|
phy-handle = <&phy0>;
|
};
|
|
&cpsw_emac1 {
|
phy-mode = "rgmii-id";
|
dual_emac_res_vlan = <2>;
|
phy-handle = <&phy1>;
|
};
|
