* Microchip MCP251X stand-alone CAN controller device tree bindings
|
|
Required properties:
|
- compatible: Should be one of the following:
|
- "microchip,mcp2510" for MCP2510.
|
- "microchip,mcp2515" for MCP2515.
|
- "microchip,mcp25625" for MCP25625.
|
- reg: SPI chip select.
|
- clocks: The clock feeding the CAN controller.
|
- interrupts: Should contain IRQ line for the CAN controller.
|
|
Optional properties:
|
- vdd-supply: Regulator that powers the CAN controller.
|
- xceiver-supply: Regulator that powers the CAN transceiver.
|
- gpio-controller: Indicates this device is a GPIO controller.
|
- #gpio-cells: Should be two. The first cell is the pin number and
|
the second cell is used to specify the gpio polarity.
|
|
Example:
|
can0: can@1 {
|
compatible = "microchip,mcp2515";
|
reg = <1>;
|
clocks = <&clk24m>;
|
interrupt-parent = <&gpio4>;
|
interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
|
vdd-supply = <®5v0>;
|
xceiver-supply = <®5v0>;
|
gpio-controller;
|
#gpio-cells = <2>;
|
};
|
