/*
|
* Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
|
*
|
* SPDX-License-Identifier: GPL-2.0+
|
*/
|
|
#ifndef _CONFIG_THEADORABLE_H
|
#define _CONFIG_THEADORABLE_H
|
|
/*
|
* High Level Configuration Options (easy to change)
|
*/
|
#define CONFIG_DISPLAY_BOARDINFO_LATE
|
|
/*
|
* TEXT_BASE needs to be below 16MiB, since this area is scrubbed
|
* for DDR ECC byte filling in the SPL before loading the main
|
* U-Boot into it.
|
*/
|
#define CONFIG_SYS_TEXT_BASE 0x00800000
|
#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
|
|
/*
|
* Commands configuration
|
*/
|
|
/*
|
* The debugging version enables USB support via defconfig.
|
* This version should also enable all other non-production
|
* interfaces / features.
|
*/
|
|
/* I2C */
|
#define CONFIG_SYS_I2C
|
#define CONFIG_SYS_I2C_MVTWSI
|
#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
|
#define CONFIG_I2C_MVTWSI_BASE1 MVEBU_TWSI1_BASE
|
#define CONFIG_SYS_I2C_SLAVE 0x0
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
/* USB/EHCI configuration */
|
#define CONFIG_EHCI_IS_TDI
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
|
|
/* SPI NOR flash default params, used by sf commands */
|
#define CONFIG_SF_DEFAULT_SPEED 27777777 /* for fast SPL booting */
|
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
|
|
/* Environment in SPI NOR flash */
|
#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */
|
#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
|
#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */
|
#define CONFIG_ENV_OVERWRITE
|
|
#define CONFIG_PHY_MARVELL /* there is a marvell phy */
|
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
|
|
#define CONFIG_SYS_ALT_MEMTEST
|
#define CONFIG_PREBOOT
|
|
/* Keep device tree and initrd in lower memory so the kernel can access them */
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
"fdt_high=0x10000000\0" \
|
"initrd_high=0x10000000\0"
|
|
/* SATA support */
|
#define CONFIG_SYS_SATA_MAX_DEVICE 1
|
#define CONFIG_SATA_MV
|
#define CONFIG_LIBATA
|
#define CONFIG_LBA48
|
|
/* Additional FS support/configuration */
|
#define CONFIG_SUPPORT_VFAT
|
|
/* PCIe support */
|
#ifdef CONFIG_CMD_PCI
|
#ifndef CONFIG_SPL_BUILD
|
#define CONFIG_PCI_MVEBU
|
#endif
|
#endif
|
|
/* Enable LCD and reserve 512KB from top of memory*/
|
#define CONFIG_SYS_MEM_TOP_HIDE 0x80000
|
|
/* FPGA programming support */
|
#define CONFIG_FPGA_STRATIX_V
|
|
/*
|
* Bootcounter
|
*/
|
#define CONFIG_BOOTCOUNT_LIMIT
|
#define CONFIG_BOOTCOUNT_RAM
|
/* Max size of RAM minus BOOTCOUNT_ADDR is the bootcounter address */
|
#define BOOTCOUNT_ADDR 0x1000
|
|
/*
|
* mv-common.h should be defined after CMD configs since it used them
|
* to enable certain macros
|
*/
|
#include "mv-common.h"
|
|
/*
|
* Memory layout while starting into the bin_hdr via the
|
* BootROM:
|
*
|
* 0x4000.4000 - 0x4003.4000 headers space (192KiB)
|
* 0x4000.4030 bin_hdr start address
|
* 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB)
|
* 0x4007.fffc BootROM stack top
|
*
|
* The address space between 0x4007.fffc and 0x400f.fff is not locked in
|
* L2 cache thus cannot be used.
|
*/
|
|
/* SPL */
|
/* Defines for SPL */
|
#define CONFIG_SPL_FRAMEWORK
|
#define CONFIG_SPL_TEXT_BASE 0x40004030
|
#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030)
|
|
#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
|
#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
|
|
#ifdef CONFIG_SPL_BUILD
|
#define CONFIG_SYS_MALLOC_SIMPLE
|
#endif
|
|
#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
|
#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
|
|
/* SPL related SPI defines */
|
#define CONFIG_SPL_SPI_LOAD
|
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x1a000
|
#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
|
|
/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
|
#define CONFIG_DDR_FIXED_SIZE (2 << 20) /* 2GiB */
|
|
#endif /* _CONFIG_THEADORABLE_H */
|
